Species concentration in chemical reactor

Assignment Help Mechanical Engineering
Reference no: EM13710288

A fourth-order polynomial passes through the five points for which the independent and dependent variables, x and y, respectfully, are given (-2,37), (-1,7), (0,5),(1,13), and (2,61). Find the polynomial by any suitable method. Here, x represents the spatial location and y the species concentration in chemical reactor.

Reference no: EM13710288

Questions Cloud

Determine the mass flow rate of the air : Air enters a pipe at 25 0C, 100 kPa at a flow rate of 36 m3/hr. A heater on the outside of the pipe draws 8 amps at a voltage of 120 V. All the heat from the heater is transferred to the air (well insulated and wall t is small). Assuming that the air..
Determine the mass flow rate at the inlet : Steam at 80 bar, 440 0C, enters a turbine operating at steady state at a volumetric flow rate of 180 m3/min. The water exits the turbine in two streams, 20% as exits through a 0.25 m diameter pipe at 60 bar, 400 0C. The rest exits through a 1.5 m dia..
Modeling the air as ideal gas with constant specific heats : Air is contained in a piston-cylinder assembly, initially at 40 lbf/in2 and 600 ?R. The air expands in a poly tropic process with n = k = 1.4 until the volume is doubled. Modeling the air as an ideal gas with constant specific heats,
Determine mass flow rate in m/s modeling air as ideal gas : Air exits a turbine at 250 kPa, 3000C at a flow rate of 1000 l/s. Determine the mass flow rate in m/s modeling the air as an ideal gas.
Species concentration in chemical reactor : A fourth-order polynomial passes through the five points for which the independent and dependent variables, x and y, respectfully, are given (-2,37), (-1,7), (0,5),(1,13), and (2,61). Find the polynomial by any suitable method. Here, x represents the..
Amount of heat required to convert this into saturated water : A tank at 60 degrees C saturated water and mass 2 kg. What is the amount of heat required to convert this into saturated water?
Compute the fugacity of pure liquid water : Calculate the fugacity of liquid hydrogen sulphide in contact with its saturated vapor at 25.5C and 20 bars. The vapor pressure of pure water at 310.6 K is 6.455 kPa. Compute the fugacity of pure liquid water at 310.6 K when it is under a pressure of..
Heat is transferred to the refrigerant : A 5.23 ft3 rigid tank contains saturated refrigerant-134a at 100 psia. Initially, 12 percent of the volume is occupied by liquid and the rest by vapor. A valve at the top of the tank is now opened, and vapor is allowed to escape slowly from the tank...
Pipe for use within a chemical processing plant : What information do you need to know from the process engineering department to select suitable pipe? What information do you need to know from the structural engineering department to select suitable pipe?

Reviews

Write a Review

 

Mechanical Engineering Questions & Answers

  Consider a summer air-conditioning system

Consider a summer air-conditioning system that is required to maintain a room (space) at specified conditions. The layouts of the system as well as the specifications are listed below. Required room temperature 23C, 50% Relative humidity.

  Oxygen at 100 kpa 27degc is compressed to 1 mpa in an

oxygen at 100 kpa 27degc is compressed to 1 mpa in an adiabatic compressor whose isentropic efficiency is 0.80.

  Determine a the net power developed in kw b the back work

air enters the compressor of an ideal closed air-standard brayton cycle at 100kpa with a volumetric flow rate of 5m3s.

  A bar of high strength aluminum alloy is 150 mm long and

a bar of high strength aluminum alloy is 150 mm long and has a circular cross section of diameter 40mm. it is subjected

  A two-phase liquid-vapor mixture of h2o has a temperature

a two-phase liquid-vapor mixture of h2o has a temperature of 300oc and occupies a volume of 0.05 m3. the masses of

  Derive an equation to calculate the maximum deflection

derive an equation to calculate the maximum deflection point on a beam held up by pins represented by reaction forces

  Compressor air enters 100 kpa and 17c and exits compressor

compressor air enters 100 kpa and 17c and exits compressor 600 kpa and 167c. mass flow rate of air is 2 kgmin amp power

  Plot a graph representing heat flux through the window as a

sufficient heating systems must be developed for a manned mission to the surface of mars. indeed the martian surface

  A steel ring of mean diameter 250 mm has a square section

a steel ring of mean diameter 250 mm has a square section 2.5 mm by 2.5 mm. it is split by a narrow radial saw cut. the

  If he starts at va 2 fts where s 0 at a determine the

when the motorcyclist is at a he increases his speed along the vertical circular path at the rate of v v dot 0.04s

  For 20 mole of methane per second determine the amount of

consider the combustion of methane using 20 excess air with a methane conversion of 85. air enters at 300oc and methane

  Compute if possible both the velocity potential and the

a candidate velocity field is represented byv 9xy2 cosy i in the i direction - 3y3 j in the j directiona. is this a

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd