Sketch the output signal waveform

Assignment Help Electrical Engineering
Reference no: EM13218537

Give a circuit, complete with component values, for a weighted sum- mer that shifts the dc level of a sine-wave signal of 3 sin (ωt) V from zero to -3 V. Assume that in addition to the sine-wave signal you have a dc reference voltage of 1.5 V available. Sketch the output signal waveform.

Reference no: EM13218537

Questions Cloud

Calculate the average seconds per day : Suppose station A and B are interconnected through two parallel unreliable links, where each link has a failure probability of 0.1. Calculate the average seconds per day when A and B lose communication.
Calculate the per unit resistance of this transformer : Efficiency in a power transformer is 98.6% when loaded such that its core losses equal the copper losses. Calculate the per unit resistance of this transformer.
Why scarcity forces individuals to incur opportunity cost : a.)define the concept of economic models b.)define scarcity and choices and their relationship in the study of economics c.) why do economists disagree d.) Name and define economic resources or factors of production
What are the extreme output voltage : It the resistors used are not ideal but have a ±5% manufacturing tolerance, what are the extreme output voltage and resistances that can result?
Sketch the output signal waveform : Assume that in addition to the sine-wave signal you have a dc reference voltage of 1.5 V available. Sketch the output signal waveform.
How much pat can recover from harry in monetary damages : Discuss how much, if anything, Pat can recover from Harry in monetary damages - Pat is able to find another job that nets a profit of $4,200 during that same time that Harry's house was to be painted.
Find the voltage gain realized : A transconductance amplifier with Ri = 2 kΩ, Gm = 40 mA/V , and Ro = 20kΩ is fed with a voltage source having a source resistance of 2kΩ and is loaded with a 1kΩ resistance. Find the voltage gain realized (from the source internal voltage to the o..
Use the bounce diagram to plot : The line is terminated in a load RL = 25 ohm. Use the bounce diagram to plot V(t) at a point midway along the length of the line from t = 0 to t = 25 ns.
How much will bank b keep as required reserves at a minimum : Consider a bank that receives an initial deposit of $1,000 and loans out the maximum from this that it can. This in turn is deposited into a second bank (which may technically be itself, but that doesn't change anything), which then loans out the ..

Reviews

Write a Review

Electrical Engineering Questions & Answers

  How effect do internal capacitances in the transistor model

What effect do internal capacitances in the transistor model have on practical performance of a real system? How would you use these model values to predict system performance?

  Define infinity expected number of packets in the queue

If you have an M/M/Infinity system with arrival rate lambda and service rate mu(µ), how would you show that the expected number of packets in the queue is equal

  What aspects of the software need to be considered

If designing a computer configuration for use as a workstation for one specific application, what aspects of the software need to be considered as part of the design process?

  The magnetic tape recorder uses linear analog

The magnetic tape recorder uses linear analog to digital encoding. Telephone systems use non linear analog to digital conversion. Explain the difference.

  Define in comparing the behaviour of an n-channel mosfet

In comparing the behaviour of an n-channel MOSFET with a p-channel device having identical geometry and threshold voltage, it is found that the n-channel FET has a greater drain current than that of the p-channel FET.

  Explain verify that the expressions obtained

Use the Z-transform of u[n] and properties of the Z-transform to find X(z). Verify that the expressions obtained above for X(z) are identical.

  How tall must the antennas be if the link operates

How tall must the antennas be if the link operates on a frequency of 2.450Ghz, D1=5miles, D2=11miles, and the obstruction is 60 feet high?

  Define what is the channel capacity for a channel

What is the channel capacity for a channel with a 300 Hz bandwidth and as S/N = 3? 2nd problem: Given a channel with a 50 kHz bandwidth and a S/N = 127, determine:

  Find the applied voltage of an iron-core transformer

Find the applied voltage of an iron-core transformer if the secondary voltage is 240 v, and Np = 60 with Ns = 720

  Explain the parking lot of the spenditall megamall

The parking lot of the Spenditall Megamall has an area of 128 ac. It is partially landscaped to provide some areas of grass. Assume that an average of 63% of the water that falls on the parking lot will flow

  Examine of discrete time waveforms in z domain

Analysis of discrete time waveforms in z domain, A discrete time domain signal x(n) - u(n) - u(n-10) is decomposed and plotted. It is then examined in the z domian by appropriate transformation and algebraic manipulation.

  Calculate the mmf when the machine operates

calculate the mmf when the machine operates at rated voltage at full load? PLease explain how to get the solution to this problem?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd