R-410a flows inside the tubes and evaporates at a constant

Assignment Help Mechanical Engineering
Reference no: EM13624045

The cooling coil of a small air-conditioning system is to be designed for a heat-transfer rate of 48,000 Btu/hr from air at 14.7 psia and 90ºF, which flows steadily at a rate of 1500 ft3/min. The cooling coil is a finned-tube heat exchanger. The air flows over the finned surfaces, and heat transfer from the air causes the refrigerant inside the tubes to evaporate. R-410a flows inside the tubes and evaporates at a constant pressure of 40 psia from saturated liquid conditions to an exit temperature of 40ºF. Calculate the mass flow rate of liquid required and the exit temperature of the air.

Reference no: EM13624045

Questions Cloud

A use the sample data to construct a 95 confidence interval : a study of 420039 cell phone users found that 131 of them developed cancer of the brain or nervous system. prior to
Consider a solid rod with diameter d and length l subjected : consider a solid rod with diameter d and length l subjected to torsion t and moment m at both ends shown in fig. 1.
The 4-mm-diameter cable bc is made of a steel with e 200 : the 4-mm-diameter cable bc is made of a steel with e 200 gpa. knowing that the maximum stress in the cable must not
When the coil is turned slightly and released it oscillates : a circular coil of 16 turns and radius 10 cm carrying a current of 0.75 a rests with its plane normal to an external
R-410a flows inside the tubes and evaporates at a constant : the cooling coil of a small air-conditioning system is to be designed for a heat-transfer rate of 48000 btuhr from air
The following is a cross-tabulation taken from a subset of : the following is a cross-tabulation taken from a subset of the 2010 general social survey. respondents were asked
What is the force and torque on the solenoid if a uniform : a closely wound solenoid of 2000 turns and area of cross-section 1.6 times 10-4 m2 carrying a current of 4.0 a is
A motorcycle starts from rest at t 0 and travels along a : a motorcycle starts from rest at t 0 and travels along a straight road with a constant acceleration of 5 fts2 until it
The refrigerant leaves the condenser as a saturated liquid : a small vapor-compression refrigeration unit is to be built into a recreational vehicle and is designed to operate on a

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Find a condensing surface area required b circulating water

a one shell two tube pass surface condenser is required to handle the exhaust from a steam turbine developing 14 300 kw

  In dribbling the player compensates for the mechanical

a basketball of mass 0.570 kg is dropped from rest from a height of 1.25 m. it rebounds to a height of 0.734 m. a how

  More air is added until the pressure and temperature rise

a rigid tank contains 20 lbm of air at 20 psia and 70degf. more air is added until the pressure and temperature rise to

  A horizontal platform rests on four vertical springs

A horizontal platform rests on four vertical springs, each of stiffness 15kN/m and mass 0.25kg. what will the frequency of oscillation of the table be if it has a mass of 2.okg

  A what is the approximate ductility el of a brass alloy

a what is the approximate ductility el of a brass alloy that has a yield strength of 275 mpa? what is the tensile

  The rigid gate oab of fig p258 is hinged at o andnbsprests

the rigid gate oab of fig. p2.58 is hinged at o andnbsprests against a rigid support at b. what minimum

  Heat transfer from the nozzle to the surroundings is 167 kw

steam enters a nozzle at 8 mpa 400oc with a velocity of 36.9 ms. at the exit of the nozzle the pressure and temperature

  What is the maximum efficiency of the heat engine

What is the work you get out of each kJ of heat extracted from the basin? Repeat for the case that the water is at 100C. Comment on why efficient car engines run so hot.

  The stern winch takes in the towing cable at the rate of 2

the 580-ton tug is towing the 1200-ton coal barge at a steady speed of 6 knots. for a short period of time the stern

  Find the factor of safety guarding against a static failure

a bar of steel has the minimum properties se40 kpsi sy60 kpsi and sut80 kpsi. the bar is subjected to a steady

  A pison-cylinder contains 08 kg of steam of 300oc and 1

a pison-cylinder contains 0.8 kg of steam of 300oc and 1 mpa. the steam is cooled at constant pressure until one-half

  Explain the factor

explain the factor, which inhibit the use of a very high resolution and a large number of colors for display in the case of raster scanning display devices.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd