Pump is employed to deliver liquid water

Assignment Help Mechanical Engineering
Reference no: EM13708923

A pump is employed to deliver liquid water from a pond to a higher elevation. The pump steadily draws water from the pond at a volumetric flow rate of 192 gal/min through a pipe having a 7 in diameter inlet. The exit diameter of the pipe is 2 in. and the exit is located 42 ft above the pipe inlet. Water enters at 66 o F, 14.7 lbf/in.2 and exits with no significant change in temperature or pressure. The magnitude of the rate of heat transfer from the pump to the surroundings is 9% of the power input. The acceleration of gravity is 32.2 ft/s^2 .

Determine: (a) the velocity of the water at the inlet and exit, each in ft/s (b) the power required by the pump, in hp.

Reference no: EM13708923

Questions Cloud

Methane gas flows through a horizontal constant area pipe : Methane gas flows through a horizontal constant area pipe of 15 cm diameter. At section 1 p1=6 bars, T1=66 C and v1=30 m/s. At section 2 T2=38 C and V2=110 m/s.
Find the total frictional force exerted on the fluid by pipe : An Incompressible fluid flows through a 10-in diameter horizontal constant area pipe. At one section the pressure is 150 psia and 1000 ft downstream the pressure has dropped to 100 psia.Find the total frictional force exerted on the fluid by the pipe
Analytical method base on force decomposition : The lever BCD is hinged at C and attached to a control rod at B. If P = 100 lb, determine the tension in rod AB and the reaction at C, using both the graphical method and the analytical method base on force decomposition.
Determine the power input to the compressor : Refrigerant 22 enters an insulated compressor operating at steady state as saturated vapor at - 16oC with a mass flow rate of 1.5 kg/s. Refrigerant exits at 7 bar, 70oC. Changes in KE and PE from inlet to exit can be ignored.
Pump is employed to deliver liquid water : A pump is employed to deliver liquid water from a pond to a higher elevation. The pump steadily draws water from the pond at a volumetric flow rate of 192 gal/min through a pipe having a 7 in diameter inlet. The exit diameter of the pipe is 2 in. and..
Steam turbine is operating at a steady state with mass flow : A steam turbine is operating at a steady state with a mass flow rate of 3682 kg/h at the inlet. The power output of the turbine is 8700 kW. Steam enters the turbine at a pressure of 40 bar, temperature of 320 oC, and with a velocity of 13 m/s. The ex..
Technique analysis : A group project right now and my portion is "Technique analysis "applying to Petroleo Brasileiro. I have attached our group project so you can read over what we are doing.
Determine the velocity of the refrigerant at the exit : Refrigerant 134a flows at steady state through a horizontal tube with inner diameter of 0.05 m. The refrigerant enters the tube with a quality of 0.1, temperature of 36 ?C, and velocity of 10 m/s. The refrigerant exits the tube at 9 bar as a saturate..
Child labour in cocoa and coffee industries : Research the history, examples, causes, impacts and ethical issues surrounding the subject. Be sure to understand the arguments being used by all parties - HYDRAULIC FRACKING & environmental impacts

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Determine the temperature distribution along the fin and

consider a fin of rectangular cross section for heat rejection in an electronic system. the heat dissipation within the

  Two infinitely long-vertical-concentric cylinders

A viscous fluid is contained between two infinitely long, vertical, concentric cylinders. The outer cylinder has a radius ro and rotates with an angular velocity v. The inner cylinder is fixed and has a radius ri. Make use of the Navier–Stokes equati..

  A cylinder having a piston restrained by a linear spring of

a cylinder having a piston restrained by a linear spring of spring constant 15 knm contains 0.5 kg of saturated vapor

  Assuming ideal gas behavior and using nitrogen table

Three kg of nitrogen is compressed from 110 kPa, 27 C to 1100 kPa in a polytropic process with n=1.3 in a closed system. Assuming ideal gas behavior and using nitrogen table,

  The pressure inside the cylinder is held constant at 300

a mass of 15kg of air in a piston-cylinder device is heated from 25 to 77 degrees c by passing current through a

  Calculate the distance that the person needs to walk to get

during a simple orienteering exercise a person walks 250 m south then 620 m at an angle of 30 north of east and finally

  These are all serial input parallel latched sinking driver

these include micrel mm5450 mic5821 allegro a6276ea ucn5832a and texas instruments tpic6c595. these are all serial

  P8mpa and t500 degc and leaves at 40 kpa as saturated vapor

p8mpa and t500 degc and leaves at 40 kpa as saturated vapor. if the flow rate is 11.1 kgs and the power generated by

  Determine the smallest value of theta for which the rod

the thin rod has weight w and rest against the floor and the floor and the wall for which the coefficients of static

  Determine the minimum required wire diameter

a large tower is to be supported by a series of steel wires.it is estimated that the load on each wire will be 11100N. determine the minimum required wire diameter assuming a factor of safety of 2 and a yield strength of 1030MPa.

  Sppose the welbull parametes for this steel are x 726 ksi

results of a tensile test on sae 1035 cd steel yieled a mean value of the ultimate strength of 86.2 ksi and a standard

  Design a piping system that transports

We need to design a piping system that transports 35ft^3/s of water 100ft. The available head is 7ft. The pipe is to be made out of a rough concrete material. Find the necessary diameter for the pipe.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd