Reference no: EM133965764
Operate elevated work platforms up to 11 metres
Practical Assessment
Task Instruction:
This assessment requires the student to demonstrate practical skills in workplace conditions. The assessor will observe the student performing specific tasks relevant to the unit. The student must adhere to predefined conditions, including safety protocols and workplace procedures, ensuring a comprehensive evaluation of their competency in operating elevated work platforms up to 11 metres.
The student is required to set up and operate each of the following types of elevated work platforms (EWPS) at two different locations on the site, including moving the plant around the work site safely:
- Self-propelled boom lift (BL)
- Scissor lift (SL).
The following functions and controls must be performed while operating both BL and SL:
- Boom up and down
- Operate attachments
- Operate outriggers, where fitted.
The following functions and controls must be performed while operating the BL:
- Slew left and right
- Telescope in and out.
At least one EWP must be set up and operated on uneven terrain, using outriggers as required.
In doing the above, the person must fit harnesses and attach lanyards as follows:
- Energy or shock absorbers, which must be used with all fall arrest equipment
- Lanyards, which must be attached to the harness installed so that the maximum distance a person equipped with a harness would free fall before the fall arrest system takes effect is two metres.
In doing the above, the person must also:
- Establish and apply a rescue plan
- Apply safe operating procedures, including conducting operational risk assessment and treatments associated with:
- Earth leakage boxes
- Lighting
- Power cables, including overhead service trays, cables and conduits
- Restricted access barriers
- Surrounding structures
- Traffic control
- Trip hazards
- Work site visitors and the public
- Working at heights up to 11 metres
- Working in proximity to others
- Working with dangerous materials
- Locate, interpret and apply information relating to job requirements, including:
- Diagrams and sketches
- Environmental requirements, including:
- Clean-up protection
- Noise and dust management
- Vibration management
- Waste management
- Quality requirements relevant to EWP work
- Instructions issued by authorised organisational and external personnel
- Manufacturer specifications, operator manual, and instructions where specified
- Signage
- Industry standards and job specifications
- Verbal, written and graphical instructions
- Work schedules, plans and specifications
Comply with site safety plan and health and safety legislation, regulations and codes of practice applicable to workplace operations
Safely and effectively use tools, plant and equipment relevant to EWP work
Ensure safe working load of EWP is not exceeded
Communicate with others on the work site using verbal and non-verbal communication and communication technology
Work effectively and safely with others on the work site.
The AS 2550 series, titled "Cranes, Hoists, and Winches - Safe Use," is a comprehensive set of Australian Standards that provide uniform requirements and guidance for the safe operation of various lifting equipment. This series is essential for ensuring safety and compliance in industries that utilize such machinery.
Key Parts of the AS 2550 Series:
AS 2550.1: General requirements
AS 2550.3: Bridge, gantry, portal (including container cranes), jib, and monorail cranes
AS 2550.4: Tower cranes
AS 2550.5: Mobile cranes
AS 2550.10: Mobile elevating work platforms
AS 2550.11: Vehicle-loading cranes
AS 2550.13: Building maintenance units
AS 2550.15: Concrete placing equipment
AS 2550.16: Mast climbing work platforms
Each part addresses specific types of equipment, outlining safe use practices, maintenance, inspection, and operational guidelines.
Manuals and Manufacturer Specifications
1. Operator's Manual:
The operator's manual offers comprehensive instructions on the safe use of the boom lift, including pre-operation inspections, function tests, and operating procedures. For instance, the Genie S-40 & S-45 Operator's Manual provides detailed guidance on these aspects.
Manuals.genielift.com
2. Service Manual:
The service manual contains detailed information on maintenance procedures, troubleshooting, and technical specifications. For example, the Genie TB Boom Lift Service Manual covers various models and provides in-depth maintenance guidance.
3. Manufacturer Specifications:
Manufacturer specifications detail the technical parameters of the equipment, such as dimensions, weight capacities, and performance metrics. The JLG 1100SJ Boom Lift Operation and Safety Manual includes a section on general specifications and operator maintenance, which outlines these details. Your reliable and affordable assignment help starts today!
Activity 4: Planning and Preparing for Self-propelled Boom Lift Operation
Your task
Purpose:
The purpose of this task is to plan and prepare for the safe operation of a Self-propelled boom lift with a boom length under 11 metres. This includes evaluating the learner's skills in identifying job requirements, inspecting the work site, addressing potential hazards, selecting appropriate tools and equipment, and establishing safety protocols such as rescue plans. Proper planning ensures smooth and safe equipment operation on-site and compliance with health and safety regulations.
Role and Responsibility:
Boom lift Operator
You will act as a Self-propelled boom lift operator, responsible for thoroughly planning and preparing the use of the lift and associated tools to ensure safe and efficient operation of boom lift. Your duties begin with reading and interpreting task instructions to confirm job requirements, including the equipment, tools, and procedures necessary for the job. You must select and use appropriate personal protective equipment (PPE), such as hard hats, safety harnesses, gloves, and safety glasses, in accordance with workplace safety standards.
You are responsible for planning the task according to relevant work health and safety (WHS) standards, environmental guidelines, and manufacturer recommendations. This involves ensuring compliance with site safety plans, regulatory requirements, and the Safe Work Method Statement (SWMS) specific to the boom lift task. Before operating the lift, you will inspect the terrain for stability and identify potential hazards such as overhead power lines, or trip hazards. As part of hazard management, you must apply appropriate risk controls, such as installing barriers, setting up safety signage, and ensuring exclusion zones are enforced to prevent unauthorised access. In addition, you are required to establish a rescue plan and practice its execution with the team, ensuring that all fall arrest systems are correctly fitted and functional before commencing the task.
You are required to complete the following tasks:
Obtain and interpret diagrams, sketches, and job specifications from the site manager.
Use listening and questioning techniques to clarify job and health and safety requirements including AS 2550 Set: Cranes, hoists and winches - Safe use
Review and confirm the Safe Work Method Statement (SWMS) for the specific type of EWP, job requirements, and worksite conditions.
Ensure the boom lift is appropriate for the task and will not exceed the boom length of 11 metres.
Interpret information related to EWP from operator and service manual.
Confirm the sequence of operations by reviewing the work schedule, plans, and specifications.
Conduct a terrain assessment and determine if stabilisers or outriggers are available.
Assess physical conditions, including weather conditions and existence of underground pits, and identify any potential impacts on scissor lift operation. Plan for adverse weather scenarios, such as high winds, rain, or extreme temperatures, that could affect visibility or stability.
Identify hazards such as overhead power lines within the clearance limits specified in safety documentation (e.g., worksafe Victoria's ‘No Go Zones for Overhead Electrical Power Lines').
Obtain permission from the power authority if the lift will operate near electrical infrastructure.
Identify and plan for the use of special attachments for the EWP to safely shift equipment as required by the task.
Ensure that each attachment is compatible with the scissor lift and suitable for the specific task requirements.
Apply safe operating procedures by conducting a thorough operational risk assessment. Address risks and implement treatments related to:
Earth leakage boxes to prevent electrical faults.
Adequate lighting for visibility during operation.
Power cables, including overhead trays and conduits, to prevent contact hazards.
Restricted access barriers to prevent unauthorised entry.
Surrounding structures that could obstruct lift movements.
Traffic control to manage vehicle and pedestrian flow near the worksite.
Trip hazards such as cables, uneven surfaces, or tools left on the ground.
Work site visitors and the public to ensure they remain at a safe distance.
Working at heights up to 11 metres, following height safety protocols.
Proximity to other workers, ensuring operations are coordinated to prevent interference.
Safe handling of dangerous materials used in the task.
Identify and obtain materials needed for the task, such as mounting brackets, signage components, and electrical wiring.
Prepare and safely handle materials to avoid damage or injury during transportation and use.
Organise and locate materials at the worksite, ensuring they are easily accessible for installation from the lift.
Inspect materials for any defects or issues before use, and report or replace faulty items as needed.
Select and check plant, tools, and equipment, including PPE, according to job requirements.
Verify that all tools and equipment are in good working condition. If any faults are identified, rectify them or report them to the supervisor before beginning the task.
Ensure PPE prescribed under legislation, regulations, codes of practice and workplace policies and practices are available and appropriate for the task.
Develop a rescue plan including use of fall arrest system, with the team, ensuring procedures are in place to safely rescue any person in case of a fall or emergency.
Practice the rescue plan before operating the boom lift, ensuring all team members understand their roles in an emergency.
Communicate with team members using verbal, non-verbal, or radio communication to confirm roles, tasks, and safety procedures.
Ensure smooth coordination using communication technology such as radios to address unexpected situations.
Complete all required SWMS and safety checklists related to boom lift operations and risk control measures.
Submit the photo evidence demonstrating the implementation of risk controls, including required signage and barricades.
Activity 5
Unit Assessment Task
Task Instruction:
Activity 5: Self-propelled Boom Lift Pre-Operational Inspection and Safety Check
Your task
Purpose:
The purpose of this activity is to perform thorough pre-operational checks and prepare the self-propelled boom lift for safe and effective operation, ensuring that all components comply with safety protocols and manufacturer specifications. This includes connecting the power source, inspecting the equipment for any faults, verifying the functionality of emergency devices, and conducting operational tests on all controls to ensure smooth performance.
Role and Responsibility:
Boom Lift Operator
You will act as a self-propelled boom lift operator, responsible for performing pre-operational inspections to confirm all operational and safety features are functional. This includes reviewing the operator's manual to follow specified checks, connecting the power source as per manufacturer guidelines, and inspecting critical components like emergency stop devices. Controls such as up/down movement, steering, and brakes are tested for smooth operation.
The operator must ensure all emergency safety devices (e.g., emergency stop buttons, manual lowering systems, alarms) are present and operational. Any faults detected should be documented in the Equipment Inspection Log and reported to the supervisor.
You are required to complete the following task.:
Obtain and review the operator's manual, and any verbal, written, or graphical instructions provided by the supervisor or site manager.
Identify and connect the appropriate power source for the boom lift, following manufacturer specifications to ensure a secure connection.
Verify that battery or hydraulic power levels meet the requirements for the full duration of the task.
Check that the power supply is stable and safe.
Verify attachments and operational controls (e.g., boom up/down), ensuring they are correctly fitted and functional.
Record all findings in the Equipment Inspection Log and update the EWP maintenance schedule as needed. Any identified faults must be documented and reported.
Start up the boom lift following manufacturer's start-up procedures.
Conduct control tests to verify smooth operation of:
Boom up and down
Operating attachments
Operating outriggers (if fitted)
Slew left and right
Telescope in and out
Ensure that all gauges, indicators, and control systems respond as expected during operation.
Confirm that emergency safety devices specified for the EWP are present and functional. These should include three or more of the following:
Bleed valves
Electronic override
Emergency electric hydraulic pump
Emergency or controlled descent device
Ground controls
Manual hydraulic pump.
Document any faults with emergency devices in the Equipment Inspection Log and notify the supervisor immediately if any are non-functional.
Complete the Equipment Inspection Log, noting all pre-operational checks, emergency device tests, and any defects or maintenance needs.
Submit the log and any related findings to the site supervisor, and ensure all required checklists are completed.
Activity 6: Conducting boom Lift Operation and Work Completion
Your task
Purpose:
The purpose of this activity is to safely operate the self-propelled boom lift according to job specifications, ensuring correct positioning, secure use of fall protection, and proper handling of tools and materials on the platform. The activity also includes following safe operating procedures for elevating, lowering, and shutting down the equipment, as well as conducting post-task cleanup and maintenance.
Role and Responsibility:
Boom Lift Operator
As the self-propelled boom lift operator, you are responsible for ensuring the safe positioning, operation, and shutdown of the lift according to the operator manual and job specifications. This includes securely positioning the platform, engaging stabilisers if necessary, and carefully arranging tools, equipment, and materials to ensure stability and accessibility on the platform. You will also wear a fall arrest harness, securely attached to an anchor point, to protect yourself while working at height.
During operation, you will elevate the platform to the required height, following the manufacturer's recommendations for smooth and safe control. Once the job is complete, you will lower the platform, shut down the equipment, and ensure that the work area is cleared and cleaned. This includes disposing of, recycling, or reusing materials as per regulations, performing maintenance checks, and securely storing tools and equipment.
You are required to complete the following task.:
Position the boom lift platform at the designated work area following job application requirements. Use diagrams, sketches, and work schedules to verify the correct positioning.
Engage stabilisers or outriggers (if fitted) to level the lift base according to safe operating procedures.
Identify the safe working load specified in the manufacturer specifications.
Ensure the safe working load (SWL) is not exceeded by calculating the total load on the platform, including tools and materials.
Securely place tools, equipment, and materials on the platform, ensuring they are arranged to prevent shifting or falling.
Confirm all items are organised logically for easy access during the task, reducing the need for repositioning while elevated.
Verify the platform load is within the manufacturer's SWL limit by interpreting the specifications and performing calculations as necessary.
Wear the fall arrest harness and attach the lanyard to the designated anchor point on the platform, securing it per safety protocols.
Confirm that fall arrest systems (including harnesses and lanyards with energy or shock absorbers) are properly fitted and functional, with the free-fall distance limited to two metres.
Elevate the platform by following the EWP control instructions as specified in the operator manual.
Perform required boom lift functions and controls to ensure safe and effective operation, including:
Boom up and down
Operating attachments
Operating outriggers (if fitted)
Slew left and right
Telescope in and out
Limit the operation of noisy machinery to designated work hours, as outlined in local regulations or site policies.
Ensure materials stored on the platform are covered to prevent dust dispersal.
Maintain smooth and steady control during ascent and coordinate with any team members on the ground using verbal and non-verbal communication.
Communicate key safety information to nearby personnel, ensuring they stay clear of the lift area while elevating the platform. Use radios if available for clear communication.
Once the platform reaches the required height, engage locking devices to stabilise it as specified in the operator manual.
If required by the job, power off the lift while the platform is engaged at the elevated position, ensuring safety and stability during task completion.
Complete the job tasks as directed in the job specifications, SWMS, and operator manual, ensuring compliance with all health and safety requirements.
Follow quality requirements and safe operating procedures during the task, using all tools, materials, and controls according to workplace standards.
After the task is complete, use the controls to lower the platform safely to ground level, following the manufacturer's recommended procedures for smooth descent.
Confirm surrounding areas are clear before lowering to avoid accidents or interference with other workers.
Perform shut-down steps as specified in the operator manual, ensuring all controls are set to the off position.
Power off the lift fully and engage any locking devices as needed to secure the equipment. Conduct a visual check to confirm the equipment is safely positioned before moving away.
Clear the work area by removing tools, materials, and any debris, ensuring it is left in a safe, organised state. Dispose of materials according to legislation, codes of practice, and job specifications.
Implement waste management protocols, recycling or reusing materials as applicable, and maintain a clean environment by following site standards.
Clean the boom lift, tools, and equipment to remove any dirt or debris accumulated during the task. This helps prevent future issues and ensures readiness for the next operation.
Follow the manufacturer's maintenance guidelines to check and maintain all tools and equipment, confirming they are in good working order before storage.
Complete all work completion procedures, including:
Completing the logbook and recording any post-operational checks.
Filling out equipment inspection and handover documents if required.
Safely and securely storing all safety equipment.
Notify the supervisor or relevant personnel of job completion, and submit all documentation, including any reports for faulty equipment or workplace incidents.
You are required to submit the photo evidence showing that you have cleaned up the workplace after completing the task.