Pitot -static tube to measure the wind speed

Assignment Help Mechanical Engineering
Reference no: EM13705892

A meteorologist uses a pitot -static tube to measure the wind speed in a tornado. Based on the damage caused by the storm, the tornado is rated as EF5 on the enhanced Fujita Scale. This means that the wind speed is estimated to be in the range of 261 to 381 mph. is it reasonable to use the incompressible pitot-tube equation (3.16) to determine the actual wind speed, or must compressible effects to taken into account? Explain

Reference no: EM13705892

Questions Cloud

What wind velocity and barometric pressure : On a beautiful day your ship sights a water spout in the East Indian Ocean. You fix your position as 6000 ft from the spout and record a wind velocity of 10 ft/s. What wind velocity and barometric pressure does a fishing boat 600 ft from the spout ex..
Automobile is accelerated : 040 kg automobile is accelerated from 5 kmph to 70 kmph. What is the average power (in hp) required if this is done in 7 s?
Find the force and the velocity generated by the piston : A hydraulic cylinder has a piston diameter of 2.2 inches, a fluid pressure of 1100 psi, a flow rate of 132 cubic inches per minute, and a stroke of 10.5 inches. Find the force and the velocity generated by the piston.
Secant method to a desired accuracy precision : Write an M-file to solve an equation with the bisection method and with the secant method to a desired accuracy precision. Request upper and lower limits for bisection (you may assign a step size or request an input value)
Pitot -static tube to measure the wind speed : A meteorologist uses a pitot -static tube to measure the wind speed in a tornado. Based on the damage caused by the storm, the tornado is rated as EF5 on the enhanced Fujita Scale. This means that the wind speed is estimated to be in the range of 261..
Four weights is to pass through the center of the raft : Three children are standing on a 5×5-m raft. The weights of the children at Points A, B, and C are 375 N, 260 N, and 400 N, respectively. If a fourth child of weight 425 N climbs onto the raft, determine where she should stand if the other children r..
Determine the reading on the pressure gauge : A 400 L rigid tank contains 5 kg of air at 25 C. Determine the reading on the pressure gauge if the atmospheric pressure is 97 kPa.
Calculate the change in free-energy : Calculate the change in free-energy associated with the formation of a critical spherical nucleus in pure liquid nickel that is 200 ºC under cooled. Properties of Nickel: Heat of Fusion 2660 J/cm3; Surface Energy 255x10-7 J/cm2 ; Freezing Temperatur..
Find the specified property data at the indicated states : Using the steam tables (water), find the specified property data at the indicated states. In each case, place the state on sketches of p-v and T-v diagrams.

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  The water behind hoover dam in nevada is 206m higher than

the water behind hoover dam in nevada is 206m higher than the colorado river below it. at what rate must water pass

  10 c at the top and bottom surfaces respectively if the

the concrete slab of a basement is 11 m long 8 m wide and 0.20m thick. during the winter temperatures are nominally 17

  Determine the resulting stress equations

Determine the resulting stress equations for σx, σy and τxy given the Airy's stress function ? = a1x^4 + a2(x^3)y + a3(x^2)(y^2) + a4x(y^3) + a5(y^4), where ai are constants. Also determine, if any, the restrictions between constants.

  Analyze the cycle assuming air standard assumptions that

a gas turbine engine has a pressure ratio of 9.2 to 1 and operates on an ideal brayton cycle. assume air enters at 25 c

  Phases in a system consisting of h2o

Determine the phase or phases in a system consisting of H2O at the following conditions and sketch P-v and T-v diagrams showing the locations of each state:

  The water is heated to 300 degrees c find the final

a pistoncylinder setup contains 0.1 kg of saturated liquid and vapor water at 100 kpa with quality 25. the mass of the

  Consider a light single-engine airplane such as the piper

consider a light single-engine airplane such as the piper super cub. if the maximum gross weight of the airplane is

  Determine total and flow energies of the steam per unit mass

Steam is leaving a pressure cooker whose operating pressure is 30 psia. It is observed that the amount of liquid in the cooker has decreased by 0.45 gal in 60 minutes after the steady operating conditions are established, and the cross-sectional area..

  First tubes and on the tubes deep in teh array

Air at 20C flows over a very large bank of 2 cm OD tubes that are kept at 100C. the air approaces at an angle of 15 degress off normal to the tubes. the tube array is staggered, with SL= 3.5 CM and ST= 2.8 cm. Find Average h on the first tubes and on..

  Consider a counter-flow heat exchanger in a refrigeration

consider a counter-flow heat exchanger in a refrigeration system. saturated liquid-vapor mixture of r-22 enters the

  Explain what would happen to the ball just after it has

during testing for the original astronauts a centrifuge was used to propel them up to a 20 g normal acceleration. the

  The steam expands adiabatically until its final pressure

a piston-cylinder assembly initially contains 0.15 m3 of steam at 20 bar and 320oc. the steam expands adiabatically

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd