Piston-cylinder device is compressed from an initial state

Assignment Help Mechanical Engineering

Reference no: EM13710294

Air in a piston-cylinder device is compressed from an initial state (temperature = 80 C, pressure = 100 kPa, volume = 0.3 m3) to a final state (temperature = 250 ?C, pressure = 600 kPa), during a polytropic process (n = 1.28094065700868). What is the heat transfer associated with this process in kJ? (Remember, heat in is positive, heat out is negative.)

Reference no: EM13710294

Questions Cloud

Determine the volumetric flow rate of the steam at the inlet : A steam turbine operating at steady state produces 6,000 hp with a heat transfer to the surroundings at a rate of 360,000 Btu/hr. Steam enters at 600 0F, at 200 psi and exits as a saturated vapor at 8 psi. Neglecting the KE and PE determine the volum..

Determine the heat transfer from the nozzle : Air flowing at 23 kg/s enters a nozzle operating at steady state at 450 K, 300 kPa and a velocity of 2 m/s and exits at a temperature of 300 K and a velocity of 400 m/s. Using the ideal gas model for air, determine (a) the area of the inlet in m2 and..

Determine the exit velocity and inlet and exit flow areas : Steam flowing at 3 kg/s through a nozzle operating at steady state expands from the inlet at 20 bar, 280 0 C to the exit at 7 bar, 180 0 C. The inlet velocity is 90 m/s. Neglecting heat transfer, determine (a) the exit velocity in m/s and (b) the inl..

Determine the mass flow rate : R134a flowing at 12 m/s enters a 25 mm diameter tube at a quality of 15%, at 36 0C and exits the tube at 10 bar as a saturated liquid. Determine (a) the mass flow rate of the R134a in kg/s, (b) the velocity of the R134a at the exit in m/s and (c) the..

Piston-cylinder device is compressed from an initial state : Air in a piston-cylinder device is compressed from an initial state (temperature = 80 C, pressure = 100 kPa, volume = 0.3 m3) to a final state (temperature = 250 ?C, pressure = 600 kPa), during a polytropic process (n = 1.28094065700868). What is the..

Water is being filled with water through two inlet pipes : A tank initially filled with 500 lb liquid water is being filled with water through two inlet pipes. One delivers hot water at mass flow rate of 1.5 lb/min and the second delivers cold water at a mass flow rate of 3 lb/min. A single exit pipe is drai..

Determine the mass flow rate of the air : Air enters a pipe at 25 0C, 100 kPa at a flow rate of 36 m3/hr. A heater on the outside of the pipe draws 8 amps at a voltage of 120 V. All the heat from the heater is transferred to the air (well insulated and wall t is small). Assuming that the air..

Determine the mass flow rate at the inlet : Steam at 80 bar, 440 0C, enters a turbine operating at steady state at a volumetric flow rate of 180 m3/min. The water exits the turbine in two streams, 20% as exits through a 0.25 m diameter pipe at 60 bar, 400 0C. The rest exits through a 1.5 m dia..

Modeling the air as ideal gas with constant specific heats : Air is contained in a piston-cylinder assembly, initially at 40 lbf/in2 and 600 ?R. The air expands in a poly tropic process with n = k = 1.4 until the volume is doubled. Modeling the air as an ideal gas with constant specific heats,

User Account

All Pages