Perform the design project and submit the report

Assignment Help Mechanical Engineering
Reference no: EM132380296

Design Project - A/C System for SPD Gymnasium

Use the following information to help you to carry out the design project.

Important Information

You are appointed as the Consultant Engineer to design the year-round air-conditioning system for the SPD Sport Center, which consists of two zones: gymnasium and changing room. Conditioned air supplying to both zones is providing by one central system. The central air-conditioning system consisting of adiabatic air mixer and cooling coil, whereas individual zone is installed with its own re-heater, humidifier, filter and fan (with negligible heat gain).

Details of these two zones are:

Internal volume of gymnasium = 750 m3

Internal volume of changing room = 160 m3

During Spring season (February and March):

The ambient air is at 18 °C DB and 85 % R.H.

For the two zones under consideration:

 

 

Zone

Required Condition

 

Room Load (kW)

 

Number of Air Change Required Per Hour

Maximum Temperature Raised by Supplied Air (°C DB)

 

°                 C DB

 

% RH

 

Sensible

 

Latent

Gymnasium

22

50

12

6

8

7

Changing

Room

25

55

2

1

4

7

During Summer season (April to Mid-November) The ambient air is at 29 °C DB and 70 % R.H.

For the two zones under consideration:

 

 

Zone

Required Condition

 

Room Load (kW)

 

Number of Air Change Required Per Hour

Maximum Temperature Raised by Supplied Air (°C DB)

 

°                 C DB

 

% RH

 

Sensible

 

Latent

Gymnasium

22

50

22

8

8

7

Changing

Room

25

55

3.5

1

4

7

During Winter season (Mid-November to January) The ambient air is 16.5 °C DB and 55 % R.H.

For the two zones under consideration:

 

 

Zone

Required Condition

 

Room Load (kW)

 

Number of Air Change Required Per Hour

Maximum Temperature Raised by Supplied Air (°C DB)

 

°                 C DB

 

% RH

 

Sensible

 

Latent

Gymnasium

22

50

12

6

8

7

Changing

Room

25

55

2

1

4

7

Design Tasks

(I) Form your own Design Team (group size: 2 students; other group size needs approval).

(II) Perform the design project and submit the report (don't exceed 30 pages) before end of Week 11.

(III) The suggested air-conditioning system should be able to handle the air-conditioning of SPD Sport Center throughout the whole year, and should include the following information:
a) Condition of the supplied air to EACH of these two zones.
b) Condition of air entering the cooling coil.
c) Heat rejection rate at the cooling coil.
d) Rate of condensation at the cooling coil.
e) Heat addition rate to EACH re-heater.
f) Rate of moisture addition at EACH humidifier.

(IV) Your report should also include:
a) The air-conditioning plant layout.
b) Operation method of the air-conditioning plant in every season.
c) All air-conditioning process lines on the psychrometric chart (one chart for each season).
d) Brand and model of the suggested air-conditioning system.

Verified Expert

The current work gives one of the possibilities of designing an air conditioning system with the desired outputs as per given requirements which is unique in a way that each component is designed individually which later can be combined to make a central air conditioning system.

Reference no: EM132380296

Questions Cloud

Allocate the costs incurred by mitzu to the appropriate : On January 1, Mitzu Co. pays a lump-sum amount of $2,650,000 for land, Building 1, Building 2, and Land Improvements 1. Building 1 has no value.
How might racism and prejudice impact his assimilation : Post an explanation of how dominant groups can play a role in marginalizing other groups based on racial and ethnic characteristics. Discuss the potential.
Demonstrate connection to your desired work environment : Demonstrate a connection to your current work environment. If you are not employed, demonstrate a connection to your desired work environment.
Explain the potential impact of white privilege on clients : Explain the potential impact of white privilege on clients from both dominant and minority groups (consider impact of both positive and negative stereotypes).
Perform the design project and submit the report : Consultant Engineer to design the year-round air-conditioning system for the SPD Sport Center, which consists of two zones: gymnasium and changing room
What living options would you recommend : Mr. Gibbs is 89 years old and his wife of 67 years is 86 years old. They have 4 children. Their oldest son has been in prison for the last 25 years.
Reflection and literature review : After addressing the problems, conclude your paper with details on how you will use this knowledge and skills to support your professional and or academic goals
Define factors that fueled the need for it governance : What do you think were the critical factors that fueled the need for IT governance? In what ways did ISO affect the standards for network security?
Write a short essay describing your analysis : Your company, based in Waco, Texas, has been looking for an expansion opportunity on the West Coast. A property has just come on the market in Oregon.

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Package design

Package Design Brief: Assume you are the packaging engineer for a large consumer products company. In this company, the Packaging Design Briefs are initiated by the marketing group and forwarded to the Package Engineering group.

  Mechanical engineering questions

Define dynamic viscosity, Determine the centroid, Pressure due to the height of liquid, Advantage of changing the liquid, Calculate the total moment about the hinge of the seal gate.

  Automatic control

DOF system and Find the differential equation describing the system

  Write a paper on boyle''s law

Write a paper on Boyle's law and describe Compression and Combustion stroke . Also explain Charles's law and illustrate SI engine and CI engine.

  Verify the law for parallelogram of forces

To Verify the law for parallelogram of forces, law for triangle of forces and law of polygon of forces. These laws are very useful to calculate unknown forces in very short time.

  Discharge pressure of the compressor

What is the discharge revised discharge pressure of the compressor.

  The Case for Global Accounting Standards

The role of IFRS in both developing and developed capital markets.

  Wind turbine

Wind turbines are becoming more and more common as a method of energy production, wind turbines by their very nature are dynamic and are subject to and create their own internal and external kinematics and kinetics.

  Advanced design methodologies

8 x product engineering and design review (week 2 – 12), ~3 pages per item which must contain a brief description of the product then delve into concepts such as materials selection, manufacturing methods, life cycle analysis, recyclability and overa..

  Design of absorption column and the cooler

Design of absorption column and the cooler. Process design of other units should be completed along with pipe sizes.

  Determine the maximum total bending moment

Determine maximum total bending moment (static plus dynamic) of the beam under steady-state conditions.

  Force of the water on the gate

Determine the magnitude of the horizontal and vertical components of the force of the water on the gate.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd