Overall heat transfer coefficient

Assignment Help Mechanical Engineering
Reference no: EM13181013

An appropriate correlation for heat transfer by natural commotion from a honzontal pipe to the atmosphere is

Nu = 033Gr0.25PPr0.25

1216_Insulation on a horizontal steam pipe.png

Show that the above correlation can be simplified to

581_Insulation on a horizontal steam pipe1.png

when air has the values listed bclow

3.077x10-3K-1, ρ = 1.086 kg m-3, cp at 1.083 kg m-3 k=2.816x10-5 kWm-1K-1, μ = 1962 x10-5 kg m-1s-1

(d) The outer surface of the insulation on a horizontal steam pipe has a radius of 50 mm and is at a termxratim of 90°C. The atmospheric air surrounding the pipe is at a temperature of 14°C. and has the property s alms listed in part (c) above. Estimate the rate of heat loss by natural convection to the atmosphere by cach metit length of pipe.

2. (a) Explain how hcat is lost from a hot surface to the swrounding air.

(b) (i) Explain the effect of insulating a hot surface.

(ii) What is meant by the economic thickness of lagging?

(c)  What is the purpose of a silvered coating. usually of a good conductor. m the outside of most insulation?

3. Butanol at a tcmperaturc of 28°C is pumped at a velocity of 14 ms-1 through a 100 mm diameter tube kept at a wall temperature of 90°C. The properties of butrol are given below.

Determine the connective heat transfer coefficient (you will find the appropriate correlation in the lessons).

Data:

p = 950 kg m-3

cp = 2.142 kJ kg-1 K-2

μ = 29 x 10-3 kg m-2 s-1 at 28°C

μ = 12 x 10-3 kg m-1s-1 at 90oC

k = 2.4 x10-4 kW m-1 K-1

4. Liquid ammonia is heated as it flows at a mean velocity of 2 ins-1 through a circular pipe. The pipe, which has an internal diameter of 75 nun. is at a uniform temperature of 27°C. and the ammonia at a section 1.2 m from the inlet to the pipe has a temperature of -23°C. Use the following information to estimate the local heat transfer flux at I = 12 m. Note, the properties of ammonia liquid base been taken a -23°C, except whew stated.

Liquid ammonia properties:

Density = 600 kg m-3

Specific heat capacity = 4.86 kJ kg-1 K-1

Dynamic viscosity (at 27°C) = 1.19 x 10-4 kg m-1 s-1 Dynamic viscosity = 2D5 x 104 kg m-1 s-1

Thermal conductivity = 5.11 x 10-4 kW nr1 s-1

Heat transfer conelations:

555_Insulation on a horizontal steam pipe2.png

5. (a) Explain what is meant by an overall heat transfer coefficient.

(b) Explain what is mean by failing and what its effect will be on the value of the overall heat transfer coefficient.

(c) A heat exchanger is to be used to heat a ;micas liquid within the tubes using saturated steam at 100°C. The tubes have an inside diameter of 20 min and outside diameter of 22 trim. it is estimated that the imer surface heat transfer coefficient will be 42 kW m-2 K-1 and the mot surface heat transfer coefficient will be 15A kW m-2 K-1 when the exchanger is clean. In order to allow for possible fouling dining use you should assume a fouling factor of 1.12 x 10-4 m2 K W-1 will be applicable.

Estimate:

(i) the overall heat transfer coefficient in use

(ii) the heat transfer rate when the relevant average temperature difference between steam and fluid is 50°C and the heat exchanger has 100 tubes each of 5 m in length.

Reference no: EM13181013

Questions Cloud

What uses of resources the strategies would allow : Imagine your company has put you in charge of developing a sustainability plan, a common framework your organization will use to achieve its sustainability goals. Devise two strategies you would have your company adopt, and explain why you believe..
Compute the heat required to convert : Calculate the heat required (kJ) to convert 25.0 g of C2Cl3F3 from a liquid at 5*C to a gas at 82*C
Compare and contrast the ways in which act utilitarians : The e-Activity presents two contrasting points of view. The employees who have been laid off and Weyco Incorporated have different interests and desires, and the decision made by Weyco to provide employees who smoke with an ultimatum-quit smoking ..
A solution of water and a nonvolatile nonionizing compound : A solution of water and a nonvolatile, nonionizing compound is placed in a tube with a semipermeable membrane on one side. the tube is placed in a beaker of pure water. What initial net effect will occur?
Overall heat transfer coefficient : Explain what is meant by an overall heat transfer coefficient and explain what is mean by failing and what its effect will be on the value of the overall heat transfer coefficient.
Explain the vapor pressure of the solution : salt solution sits in an open beaker. Assuming constant temperature and pressure, the vapor pressure of the solution
What is the regulation or statute for : How do you propose to enact these standards when you are an administrator?  What is the regulation or statute for? Who does the act protect? What are the consequences for violating it? Why are laws like this good for protection? How do you propose..
In the cooper and shepard experiment : In the Cooper and Shepard experiment (1973), participants were asked to decide whether a stimulus  (a letter) was normal (simply rotated in the picture plane) or backwards (flipped to its mirror  image before the rotation).
Annual food service convention : The National Restaurant Association holds an annual food service convention in Chicago every year. This is a coveted event for many vendors to restaurants and hotels. Since this is an established event, there are hundreds of vendors at the trade show..

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Explain working with boiler suspension bolts

Working with boiler suspension bolts. An HRT boiler is 4766mm long and 3533mm in diameter. It has 66 steel tubes with a diameter of 9mm. The total dry weight of the boiler is 2.565 tonnes

  Explain beam deflection at corner through centroid

Beam deflection at corner through centroid, Sometimes the term centroid throws me for a loop. So, how would I set this problem up?

  Describe the fracture behaviour of the insulation tape

Cracks propagate when the stress intensity factor exceeds a critical value and describe the fracture behaviour of the insulation tape loaded with a small crack.

  Manufacturing processes-determine the velocity of shearing

Determine the velocity of shearing along the shear plane and the velocity of sliding at the tool-chip interface and find the work done per minute in shearing the metal and against the friction.

  Draw free body diagram - shear and moment diagrams

Determine if the shaft has infinite fatigue life. If not, determine the number of cycles to failure. Also determine the safety factor for first cycle yield and draw a free body diagram, shear and moment diagrams, and graph the loads on the shaft..

  Ewb project

write a reflective assessment of how you rate yourself against these competencies and Describe the main learning outcomes that this course and the EWB project have generated for you over the semester. Have any of these learning outcomes been a ..

  Minimum weight design of a variable shape three-bar truss

Obtain a new solution, and determine whether any buckling constraints are active. If no buckling constraints are active for L = 10 in., re-run the analysis by increasing L , and estimate the value of L at which at least one buckling constraint b..

  Advanced stress analysis assignment

Advanced Stress Analysis Assignment

  Explain state refrigeration system as saturated vapor

Refrigerant 134a enters a heat exchanger in a steady state refrigeration system as saturated vapor at 0 °F and exits at 20 °F with no change in pressure.

  Find out the largest couple that can be applied

Determining the largest couple that can be applied to a beam in pure bending. A beam of cross section shown is extruded from an aluminum alloy for which σy = 310 MPa and σu = 480 MPa.

  Aerodynamics and flight mechanics

Write a short technical report on Frequency Division Multiplexing

  A bullet is fired horizontally into a wood block resting

A bullet is fired horizontally into a wood block resting on a horizontal, frictionless surface. If the mass of the bullet is 0.02 Kg and the velocity is 600 m/s

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd