Obtain the impulse responses of the systems

Assignment Help Electrical Engineering
Reference no: EM13229001

Obtain the impulse responses of the following systems

(a) The ideal delay system. y[n] = x[n-nd]

(b) The accumulator system. y[n] = sum (xk) , k from -inf to n

(c) Forward difference system. y[n] = x[n + 1]- x[n] (d) Backward difference system. y[n] = x[n]- x[n - 1]

Reference no: EM13229001

Questions Cloud

Determine the upper and lower control limits for fraction : A medical facility does MRIs for sports injuries. Occasionally a test yields inconclusive results and must be repeated.
Develop the voltage loop equation in terms of current : A lossy resonator consisting of a series connected RLC circuit is attached to a voltage source Vs=Vo(e^(jpi/3)) a) Develop the voltage loop equation in terms of current i(t), R, L, C, and vs b) Find the corresponding phasor equation
Write equations for fixed-variable and average costs : Sven has decided to make and sell his grandmother's pasta. He rents a building for $600/month and pasta equipment for $300/month. The pasta costs $.20 /pound in raw materials to make . Sven can make up to 3000 pounds a month by himself.
State smallest possible integer coefficients and adding h+ : Balance the following reaction, which occurs in acidic aqueous solution, using the smallest possible integer coefficients and adding H+ and H2O as necessary
Obtain the impulse responses of the systems : (a) The ideal delay system. y[n] = x[n-nd] (b) The accumulator system. y[n] = sum (xk) , k from -inf to n (c) Forward difference system. y[n] = x[n + 1]- x[n] (d) Backward difference system. y[n] = x[n]- x[n - 1]
Define what is the concentration of urea : The decomposition of urea in 0.1 M HCl is first order in urea and first order overall. When [urea] = 0.200 M , the rate at 61.0 °C is 8.56 x 10-5 M/s. What is the concentration of urea in this solution after 4751 s if the starting concentration is 0..
Discuss the types of organizational culture changes : Discuss the types of organizational culture changes (especially within the medical staff) that will have to take place in order to incorporate IT solutions in the health care workplace.
Find the equivalent e-field and the implied flux : The solar constant at Earth orbit (1 AU = 1 Astronomical Unit - Sun-Earth distance) is ~1400 Watts/m2. Assuming that this Poynting flux magnitude can be associated with a single E- and Hfield (i.e., E × H ),
Explain what is the molar solubility of the compound : The Ksp value for copper(II) sulfide is 6.0 × 10 -37. What is the molar solubility of this compound?

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Calculate the maximum value of k for stability

A sampled-data system such as that presented in problem (i) has a sampling period T = 0.05s and has G(z) = K (z3 + 10.3614z2 + 9.758z + 0.8353) / (z4 - 3.7123z3 + 5.1644z2 - 3.195z + 0.7408) 1. Determine K when the two real poles break away from the ..

  Calculate the maximum power

Calculate the maximum power that can be sent through an a=2cm , b=1cm air-filled waveguide at 12 GHz such that dielectric breakdown does not occur. Assume that the dielectric strength of air at atmospheric pressure is 3x10^6 [V/m]

  Function of the hmi in a scada system

This assignment contains electronics engineering questions like State the commonly found components of a SCADA (Supervisory control and data acquisition) system. and decribe the function of the HMI in a SCADA system.

  Explain understanding low high and band pass filters

Understanding low, high and band pass filters, A signal in the IF section of an FM radio receiver occupies the frequency band 10.61 MHz to 10.79 MHz. Compute the bandwidth of this signal.

  Explain what is the shape of the spectrum of the signal

What is the shape of the spectrum of the signal? What is the extent of the spectrum in the frequency domain? What is the unit that is applied to the magnitude of the spectrum?

  Calculate the s/n ratio for a receiver output

Calculate the S/N ratio for a receiver output of 4 V signal and 0.48 V noise both as a ratio and in decibel form. (69.44, 18.42dB)

  Find the minimum product-of-sums for the function

a) Using K-Map, find the minimum product-of-sums for the following function. Circle the term on the map and write the result in algebraic form. b) Draw the block diagram in NOR-NOR.

  Will ohsas pel be exceeded

A plant has two identical standby generator units for emergency power use. In the area of the generators, the normal noise level registers 81 dBA on the sound-level meter with the generators turned off. When one generator switches on, the noise le..

  Explain what is the maximum message bandwith

What is the maximum message bandwith for which the system operates satisfactorily? Determine the output signal to quantizing noise ratio when a full-load sinusoidal modulating wave of frequency 1 MHz is applied to the input.

  What impact would time and temperature have on a circuit

Explain why it is unlikely one would encounter a circuit exhibiting a critically damped response in practice. What impact would time and temperature have on a supposedly "critically damped" circuit

  Find what is the probability of three heads

An experiment consists of tossing a fair coin four times in succession. What are the possible outcomes Now count up the number of outcomes with three heads. If the outcomes are equally probable, what is the probability of three heads

  Electricity and circuit theory

Assessment on Electricity and Circuit Theory,  What part of a cable are insulators and conductors? Describe, in terms of charged particles, why some objects are electrically attracted to each other, while others repel each other?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd