Obtain the density of mobile electrons in the material

Reference no: EM13304650

The Hall effect can be used to determine the density of mobile electrons in a conductor. A thin strip of the material being investigated is immersed in a magnetic field and oriented so that its surface is perpendicular to the field. In a particular measurement, the magnetic field strength was 0.823 T, the strip was 0.107 mm thick, the current along the strip was 3.47 A, and the Hall voltage between the strip's edges was 1.47 mV. Find the density of mobile electrons in the material.

Reference no: EM13304650

Questions Cloud

Calculate the volatility of a portfolio : Using the data in the following table, and the fact that the correlation of A and B is .00073, calculate the volatility (standard deviation) of a portfolio that is 60% invested in stock A and 40% invested in stock B.

What is the velocity when it reaches the bottom : A 2kg uniform cyclinder is released at the top of a 1.53 m 11 degree incline. What is the velocity when it reaches the bottom

What is the maximum debt ratio the firm can use : It can borrow at a rate of 7.5%, but the bank requires it to have a TIE of at least 4.0, and if the TIE falls below this level the bank will call in the loan and the firm will go bankrupt. What is the maximum debt ratio the firm can use?

Estimate the pullout length required for each reinforcement : A continuous geogrid having a reinforcement coverage ratio equal to 100 percent. A continuous metallic grid consisting of W4 bars having a diameter equal to 5.7 mm, a distance between longitudinal bars equal to 150 mm, a distance between transvers..

Obtain the density of mobile electrons in the material : The Hall effect can be used to determine the density of mobile electrons in a conductor. Find the density of mobile electrons in the material

Determine the volume of sludge after filtration : Assume that the sludge does not change density during filtration and that liquid removed from the sludge contains no sludge. Using mass-balance method. determine the volume of sludge after filtration.

What is the linear distance on the screen : In a double-slit experiment, what is the linear distance on the screen between adjacent maxima if the wavelength is 538 nm

Compare the reactor volume required to achieve efficiency : Compare the reactor volume required to achieve 95% efficiency for Completely Mixed Flow Reactor (CMFR) and a Plug Flow Reactor (PFR) for the following conditions. steady-state, first-order reaction, flow rate = 14m3 / day.

Determine the time needed for the velocity to become v : When a particle falls through the air, its initial acceleration a=g diminishes until it is zero, and thereafter it falls at a constant or terminal velocity v_f . If this variation of the acceleration can be expressed as a=(g/v^2_f)(v^2_f-v^2)

User Account

All Pages