Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
The normalized lowpass filter with a cutoff frequency of 1 rad/sec is given as Hp(s) 1/s+1a. Use Hp(s) and the BLT to obtain an corresponding IIR digital high passs filter with a cutoff of 30 Hz, assuming a sampling rate of 200 hz,
b. using matlab to plot magnitude and phase frequency response of H(z). What are the matlab commands?
Using VHDL, define a module called "mux 4 to 1" which implements a (4:1) multiplexer. The module should take in 4 data inputs called D3, D2, D1, and D0, and two select inputs called S1 and S0. It should have a single output called Y.
a sound distribution system has the following outputs 10 watts at 8ohms,5watts at 4 ohms, 15 watts at 16 ohms and 2 watts at 4 ohms if the input to the amplifier is 20 millivolts at 600 ohms how much gain in decibels will be required of the amplif..
You are working with a design team on a new product and are assigned to design the power supply. The requirements for the power supply are as follows: Input AC: 115 V AC +- 10%, 50-60 Hz Outputs: +5 V DC at 100 ma, +-12 V DC
The duration of a cellular call is an exponential random variable with expected value of 3 minutes. A subscriber makes 120 calls each month. Use the central limit theorem to estimate the probability that the subscriber uses at least 400 minutes.
Four frequencies are applied at the input of a non-linear amplifier. Write down all of the frequency components at the output of the non-linear device. Write down only the first three harmonics.
A 5 GHz parallel polarized wave with amplitude 5 V/m is oblique incident from an air of (z 0. The angle of incidence is 53.13 deg. What is the transmission angle
Suppose that a family of logic gates considers the output ranges of [0 - 0.2V] as "0" and [3.1V-3.3V] as "1". What are the reasonable input ranges for "0" and "1"? (a) "0": [0.1 - 0.4V], "1": [2.3V - 3.3V]; (b) "0": [0-0.3V], "1": [2.8V - 3.0V]; (..
Consider a linear circuit with a single voltage source Vs = 1 V and 2000 resistors. The circuit has no other sources. The current through one of the resistors in this circuit is measured to be 5 mA. If the voltage source is changed from 1 V
A 300 W resistor is connected across the 300 Wantenna input of a television receiver. The bandwidth of the receiver is 6 MHz, and the resistor is at room temperature (20oC). Find the noise power and noise voltage applied to the receiver input.
What would be the initial value of v c (t) when switch is closed and determine the time constants in both cases (switch is open, switch is closed).
A long hallway has three doors, one at each end and one in the middle. A switch is located at each door to operate the incandescent lights along the hallway. Label the switches A, B, and C. Design a logic network to control the lights.
The collector current was measured for different values of load resistance. It was noticed that the collector current was pretty much constant for the first 1900 ohms and then it fell drastically.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd