Nitrogen gas enters an adiabatic nozzle with negligible

Assignment Help Mechanical Engineering
Reference no: EM13631791

1. Air is to be compressed from 1 atm and 298 K to 8 atm at a rate of 20,000 L/min. (a) Determine if this process should be done with a (i) isentropic process, (ii) polytropic process with n=1.25, or (iii) isothermal process. (b) Show all three processes on one P-v diagram.

2. (a) Why is the outlet state of a turbine, compressor, or pump always to the right of the inlet state on a h-s diagram? (b) Draw h-s diagrams for a turbine, compressor, and pump (three total). Show the actual and ideal processes on the h-s diagram for each device.

3. Air expands steadily through an adiabatic turbine from 10 atm, 600 K to 1 atm. (a) Calculate the work (kJ/kg) developed by the turbine if the isentropic efficiency is 85%. (b) Calculate the work (kJ/kg) developed by the turbine if the process is isentropic. (c) Draw one T-s diagram showing both processes.

4. Steam expands steadily through an adiabatic turbine from 1 MPa, 350 °C to 100 kPa. (a) Calculate the work (kJ/kg) developed by the turbine if the isentropic efficiency is 85%. (a) Calculate the work (kJ/kg) developed by the turbine if the process is isentropic. (c) Draw one T-s diagram showing both processes.

5. Nitrogen gas enters an adiabatic nozzle with negligible velocity, 300 kPa, 800 K and exits at 200 m/s. For a nozzle isentropic efficiency of 80%, calculate the exit temperature (K).

6. In heavy duty diesel engine dynamometer testing, the air-to-air intercooler is replaced with a liquid-toair heat exchanger. In the laboratory heat exchanger, air enters one side of the exchanger at a rate of 1000 L/s, 400 K, 2.5 atm and exits at 325 K. Water enters the other side of the exchanger at 1.5 L/s, 25 °C, and 3 atm. Neglecting any pressure drop through the exchanger, (a) determine the rate of heat transfer (kW) between the air and water and (b) the rate of entropy generation (kW/K).

7. The combustion gases (modeled as air) enter a turbine at 6 atm, 1000 K and exits at 1 atm, 500 K. Determine the isentropic efficiency 8. A hot steel bar is to be cooled by immersing the bar in water. A well insulated 0.5 m3 rigid tank contains water at 20 °C and 1 atm. The 10 kg bar, initially at 90 °C, is placed in the tank and the tank sealed. Determine (a) the final temperature (°C) of the bar and (b) entropy generation of this system (kJ/K).

9. Calculate the entropy generation (kJ/K) for the system in the homework problem 10 if the heat transfer occurs at 800 °C.

Reference no: EM13631791

Questions Cloud

An atom is ionized so that it has only one electron when : an atom is ionized so that it has only one electron. when the electron drops from the n 4 shell to the n 1 shell an
An axial flow compressor stage has blade rootmean and tip : an axial flow compressor stage has blade rootmean and tip velocities of 150200 and 250 ms. the stage is to be designed
At the 025 level has holdlonger increased the shelf life : the liquid chlorine added to swimming pools to combat algae has a relatively short shelf life before it loses its
A sound level meter located 892m from the explosion records : 1 a loudspeaker at a concert genertes 2.00x10-2 wm2 at a distance of 25.0m and all of its acoustic energy is radiated
Nitrogen gas enters an adiabatic nozzle with negligible : 1. air is to be compressed from 1 atm and 298 k to 8 atm at a rate of 20000 lmin. a determine if this process should be
Tennis balls to be acceptable for tournament play must : a tennis ball bouncing on a hard surface compresses and then rebounds. the details of the rebound are specified in
Iorizontal duct is uninsulated and exposed to : airflow through a long 0.2 m2 air conditioning duct maintains the outer duct surface temperature at 10 c. if the
In a physics lab experiment a spring clamped to the table : in a physics lab experiment a spring clamped to the table shoots a 19g ball horizontally. when the spring is compressed
Dtermine the amount of excavation needed for the basement : 1. determine the amount of excavation needed for the basement. a 2 foot working distance is required and the

Reviews

Write a Review

 

Mechanical Engineering Questions & Answers

  1 a solid cube of copper with each side 10 ft is

1. a solid cube of copper with each side 1.0 ft is converted into metallic powders of spherical shape by water

  5m3 of air at 2bar 270c is compressed up to 6bar pressure

5m3 of air at 2bar 270c is compressed up to 6bar pressure following pv1.3 constant. it is subsequently expanded

  Determine vertical distance between two consecutive drops

Water drips at the rate of 5 drops per second from a leaking tap. Determine the vertical distance between two consecutive drops after the lower drop has attained a velocity of 3 m/s.

  The drain from the closed heater is trapped to the open

determine the thermal efficiency and the required steam flow rate kgs for a reheat-regenerative steam power plant which

  Determine the time t when the velocity makes a 30 degree

a projectile is launched from the ground with v0100fts at t0 theta060 degrees. determine the time t when the velocity

  An electric current of 5a passing through a resistor has a

an electric current of 5a passing through a resistor has a measured voltage of 6v across the resistor. the resistor is

  I k 0410-3 ft-1 determine d such that a car driving at

the portion of a race track between points a corresponding to x0 and b is part of a parabolic curve described by the

  Determine a the velocity of the implant immediately after

the design for a new cementless hip implant is to be studied using an instrumented implant amd a fixed stimulated

  Determine the magnitudes of the velocity v and acceleration

the rectangular plate is rorating about its corner axis through o with a constant angular velocity omega 10 rads.

  A 50-mg railroad car moving with a velocity of 3 kmh is to

a 50-mg railroad car moving with a velocity of 3 kmh is to be coupled to a 30-mg cae which is at rest determinea the

  What is the force needed to seperate the top surface

A layer of water seperates two smooth surfaces a distance of 2r. Derive an experssion for the force needed to pul the two surfaces apart. Consider the bottom surface fixed. What is the force needed to seperate the top surface?

  The engine exit as well as the inefficiencies of engine

consider an aircraft powered by a turbojet engine that has a pressure ratio of 9. the aircraft is stationary on the

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd