Model a cup of coffee as a closed system containing

Assignment Help Mechanical Engineering
Reference no: EM13713310

Model a cup of coffee as a closed system containing 1 lbm of pure water at constant pressure of 14.7 psia. Using your knowledge of the 2nd Law, prove that it would be impossible for coffee at room temperature of 70 °F to heat up to 120 °F by receiving heat from the surroundings at 70 °F . Your proof should include all necessary thermodynamic calculations.

Reference no: EM13713310

Questions Cloud

Gas-turbine power plant operates on the simple brayton cycle : A gas-turbine power plant operates on the simple Brayton cycle with air as the working fluid and delivers 32 MW of power. The minimum and maximum temperatures in the cycle are 310 and 900 K, and the pressure of air at the compressor exit is 8 times t..
Determine the change in entropy of the system : A rigid vessel contains 10 kg of steam. The steam is initially at 10 bar and 300C. After a period of time the pressure in the vessel is reduced to 1 bar due to heat transfer with the surroundings. The surroundings are at a constant temperature of 20C..
Let g be a finite group with the property : Let G be a finite group with the property that all of its proper subgroups are Abelian. Let N be a proper normal subgroup of G. Show that either N is contained in the center of G or else G has a normal subgroup H which is a maximal subgroup o..
What is the second law efficiency of the process : A piston-cylinder device has an initial contained volume of 0.1 ft3 and contains steam at an initial state of 160 psia, 500°F. The steam is then expanded to 20 psia, 0.65 ft3 and as a result of this process 0.50 Btu of heat is transferred to the syst..
Model a cup of coffee as a closed system containing : Model a cup of coffee as a closed system containing 1 lbm of pure water at constant pressure of 14.7 psia. Using your knowledge of the 2nd Law, prove that it would be impossible for coffee at room temperature of 70 °F to heat up to 120 °F by receivin..
Which point is the intersection of lines ef and gh : Lines EF and GH are graphed on this coordinate plane. Which point is the intersection of lines EF and GH?
Describe four trends in macro market environment : Identify and briefly describe four trends in macro market environment which influence on the selected industry?
What is the steam quality exiting the low pressure turbine : Reheat is added to an ideal Rankine steam power cycle to improve it’s efficiency and turbine exit quality. Steam enters the HP turbine at 15 MPa and 600C.   Steam exits the HP turbine at 4 MPa and enters the boiler for reheat. Then the steam enters t..
Denver colorado is constructed with a slab-on-grade floor : A building in Denver Colorado is constructed with a slab-on-grade floor. The construction type is an uninsulated 100-mm block wall with a brick face. The perimeter of the building is 350m. Calculate the design heat loss rate from the floor.

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  The flow around a model of a turbine blade is investigated

The flow around a model of a turbine blade is investigated. The model is five times larger than the prototype. A maximum pressure of 4 psi is measured at the leading edge, a maximum velocity of fps is measured near the top of the blade, and a small d..

  An adiabatic turbine operates by accepting superheated

an adiabatic turbine operates by accepting superheated water steam at 8 mpa and 500degc at a mass flow rate of 2 kgs.

  Calculate the isentropic efficiency of the turbine if the

an adiabatic turbine handles air as the operating fluid such that the air is expanded from 2 mpa and 327 degc to 200

  A steel plate which is 15 m by 15 m and 30 mm thick is

a steel plate which is 1.5 m by 1.5 m and 30 mm thick is lifted by four cables attached to its corners that meet at a

  Determine the required diameter for the uniaxial tensile

determine the required diameter for the uniaxial tensile loaded two-force component if the failure criterion is

  What is the mass flow rate of air

A compressor receives 0.1 kg/s R-134a at 150 kPa, -10C and delivers it at 1000 kPa, 40C. The power input is measured to be 3 kW. The compressor has heat transfer to air at 100 kPa coming in at 20C and leaving at 30C (i.e. like a heat exchanger). What..

  Find the magnitude of reactions at a and the tension in rope

A block is L = 1 [m] long and h = 0.5 [m] tall and weighs 50 [N]. The box is allowed to rotate about point A. A rope is attached to the upper left corner. This rope makes a θ=40° angle from the horizon. A horizontal force of 30 [N] is applied at th..

  The coefficient of restitution of the impact is e 5

the 10-kg mass a is moving at 5 ms when it is 1 m from the stsaionary 10 kg mass b. the coefficiient of kinetic

  If the initial flow rate through the pipe is 12 ls

two water reservoirs a and b are connected to each other through a 40 m long 2 cm cast iron pipe with a sharp-edged

  Process during which relation between pressure and volume

A closed system consisting of 1 lb of a gas undergoes a process during which the relation between pressure and volume is pV^n = constant. The process begins with p1=20 lbf/in^2, V1=10ft^3 and ends with p2=100 lbf/in^2.

  Valuable metal with a thin coating of pure gold

A golden bar of metal (5 centimeters by 18 centimeters by 4 centimeters) being transported by armored car is suspected of being fake, made from a less valuable metal with a thin coating of pure gold. The bar is found to have a mass of 2.7 kilograms. ..

  A cylinderpiston contains air under ambient conditions

1 a cylinderpiston contains a saturated vapor r-410a at 10 c the volume is 10 l. the r-410a is compressed to 2mpa 60 c

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd