Mixture of air and water at a temperature

Assignment Help Mechanical Engineering
Reference no: EM13713158

A mixture of air and water at a temperature of 30ºC and a pressure of 750 mmHg has a relative humidity of 75%. The wet gas is compressed to 40 psia and cooled to 20ºC. How many cubic meters of original gas were compressed if 0.75 lb of condensate (water) was collected from the cooler/compressor?

Reference no: EM13713158

Questions Cloud

Discuss jit-just-in-time and lean production : Discuss JIT-Just-in-Time and Lean Production - Discuss Collaborative Commerce and its benefits.
Reversible process has been defined as a process : A reversible process has been defined as a process, which having taken place, can be reversed and in so doing leaves no change in either the system or the surroundings. Six restrictions were imposed
Find distance d the collision is elastic inelastic : Block 1 of mass m1 slides from rest along a frictionless ramp from height h = 3 m and then collides with stationary block 2, which has mass m2 = 5m1. What is the value of distance d if the collision is Elastic inelastic.
Change in magnetic properties when steel is heated : Describe the theory used for the IZOD test and what units are used to report toughness? Explain the change in magnetic properties when steel is heated. Is this due to allotropic properties?
Mixture of air and water at a temperature : A mixture of air and water at a temperature of 30ºC and a pressure of 750 mmHg has a relative humidity of 75%. The wet gas is compressed to 40 psia and cooled to 20ºC. How many cubic meters of original gas were compressed if 0.75 lb of condensate (wa..
Stiletto heel has a semi-circular cross-section with radius : A stiletto heel has a semi-circular cross-section with radius of 0.25 in. Due to walking over irregular surfaces and shifts in body weight, moments of up to 30 lb.-in. can act where the heel attaches to the shoe. Determine the maximum tensile or comp..
Membrane made of an isotropic material : There is a membrane made of an isotropic material whose elastic modulus and Poisson's ratios are E and v, respectively. When this membrane is elongated along x-direction with no lateral deformation in y-direction, the apparent elastic modulus (E') de..
Calculate the number of elapsed days : Write a function that calculates the number of elapsed days between two dates. For example the days between Feb 3, 1970 and June 21, 1980? Becareful for the Leap year imediately.
Pumping power requirement to overcome this pressure drop : Water at 40 degrees Fahrenheit (p=62.42 lbm/ft3 and u= 3.74 lbm/ft. hr) is flowing through a 0.12 in (0.01 ft) diameter 30 ft long horizontal pipe steadily at an average velocity of 3 ft/s. Determine the head loss, pressure drop, and the pumping powe..

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  The average radius of the wheel is 183 m and the jet

a pelton wheel is used to produce hydroelectric power. the average radius of the wheel is 1.83 m and the jet velocity

  Dtermine a the compressor power in kw b the refrigerating

a vapor compression refrigeration cycle operates at a steady state with refrigerant 134a as the working fluid.

  List the forms of energy transfer involved in this system

in a rigid tank water is heated by a benson burner while being stirred by a paddle wheel. initially the internal energy

  An airplane flies horizontally at 550 ms its

an airplane flies horizontally at 55.0 ms. its propellernbspdelivers 1500 n of thrust forward force to overcome

  The water is cooled to a temperature of 110 o c at this

saturated water vapor is contained in a closed rigid tank. the water is cooled to a temperature of 110 o c. at this

  Determine the final pressure and the quality-boundary work

A piston-cylinder device initially contains 0.15-kg steam at 3.5 MPa, superheated by 5C. Now the steam loses heat to the surroundings and the piston moves down, hitting a set of stops at which point the cylinder contains saturated liquid water. The c..

  If the liquid water is initially at a temperature of 30degc

a pot of 1 kg of liquid water is heated on a mountain top where the atmospheric pressure is 0.8 bar. if the liquid

  Hypothetical element has an atomic weight

A hypothetical element has an atomic weight of 91.6 g/mol, a density of 9.60 g/cm3, and an atomic radius of 0.137 nm. Determine whether its crystal structure is FCC, BCC, or simple cubic.

  What constant force must be exerted on the rope to bring

a 150 kg merry-go-round in the shape of a uniform solid horizontal disk of radius 1.50 m is set in motion by wrapping a

  A wheel can be modeled as a thin ring having mass 10 kg and

a wheel can be modeled as a thin ring having mass 10 kg and four spokes made of slender rods each of mass 2 kg. the

  Etimate the temperature inoc to which the block must be

at room temperature 23oc a cylinder of steel has a diameter of 15.02 mm which is too large to fit into a 15 mm diameter

  If the cost of the machine and operator is 35hr the cost of

a drilling operation is required to machine 82.0 in. diameter holes on a 20 in. diameter bolt cirile workpiece

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd