Methane oxygen and nitrogen flow into an insulated tank the

Assignment Help Mechanical Engineering
Reference no: EM13626871

Methane, oxygen and nitrogen flow into an insulated tank. the methane flow is 2 kg/s at the 320K. The oxygen flow is 3 kg/s at 340K. The nitrogen flow is 4 kg/s at an unknown temperature. The combined flows exit at 330K. All flows in and out are at 120 kPa. Find the nitrogen temperature and the rate of entropy generation in the process.

Reference no: EM13626871

Questions Cloud

For the vapor power cycle steam enters the at 3 mpa and 500 : for the vapor power cycle steam enters the at 3 mpa and 500 c and leaves at 70 kpa and 200 c. the system is operating
The plates of a parallel-plate capacitor are 328mm apart : the plates of a parallel-plate capacitor are 3.28mm apart and each has an area of 12.2 cm2. each plate carries a charge
Taking the object and liquid as a system how much word the : a 4 kg object traveling at 60 ms enters an insulated vat of 20 kg of incompressible fluid c 2.0 kjkgk and comes to
Determine the manometer reading h for the manometer : air is drawn into a small open-circuit wing tunnel as shown. atmospheric pressure is 98.7 kpa abs and the temperature
Methane oxygen and nitrogen flow into an insulated tank the : methane oxygen and nitrogen flow into an insulated tank. the methane flow is 2 kgs at the 320k. the oxygen flow is 3
Use the power series method to solve the radial equation : the schrodinger equation of a two dimensional harmonic oscillator potential can be handled by separation of variables
A venture necked-down section in a pipe develops a low : a venture necked-down section in a pipe develops a low pressure that can aspire fluid upward from a reservoir. derive
How long after the big bang did it take the universe to : how long after the big bang did it take the universe to cool to the threshold temperature for the formation of muons?
A nuclear power reactor generates 25 times 109 w of power : a nuclear power reactor generates 2.5 times 109 w of power. in one year 365.25 days what is the change in the mass of

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Engineeering materials i need you to write a report about

i need you to write a report about heat treatment of steel. i will attach the report format which you need to stick

  Derive the scaling relation for the strain energy release

derive the scaling relation for the strain energy release rate of crack extension under fixed displacement. clearly

  Determine the initial and final pressures in kpa

Friction between the piston and cylinder wall can be neglected because the process occurs so slowly. For the air, determine the initial and final pressures in kPa and the boundary work for the process in kJ.

  The mean residence time and volume of each reactor if the

three cstr are to be used in series. the second reactor has a volume twice that of the first and the third reactors.

  A valve connected to the cylinder is now opened and air is

a vertical piston-cylinder device initially contains 0.25 m3 of air at 600 kpa andnbsp300degc. a valve connected to the

  What is the difference between the pressure that is acting

a fairing for an optically perfect window for an airborne telescope is being tested in a wind tunnel. a manometer is

  If the velocity out the 2-cm-diameter tube is 15 ms

water flows into a volume that contains a sponge with a flow rate of 0.02 m3s. it exits the volume through two tubes

  Find a healt flux required in heating section to ensure a

a liquid food product is processed in a continuous flow sterilizer. the liquid enters the sterilizer at a temperature

  If the mass is displaced by 10mm from its equilibrium

if a mass of 0.3 kg is suspended from a spring of stiffness 200nm-1. if the mass is displaced by 10mm from its

  A fixed quantity of air at t1 100oc and p1 243 kpa is

a fixed quantity of air at t1 100oc and p1 243 kpa is heated at constant pressure in a piston-cylinder assembly to t2

  Sketch the entire process p-v diagram obtain an expression

an ideal gas undergoes two processes in a piston cylinder device from 1-2 a polvtropic compression from t1 and p1 with

  Determine the current supplied if the final temperature is

a mass of 12kg of saturated refrigerant-134a vapor is contained in a frictionless piston-cylinder device at 240kpa. now

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd