Materials have been used in engineering applications for

Assignment Help Mechanical Engineering
Reference no: EM13631561

Materials have been used in engineering applications for thousands of years. Sometimes these engineering structures or devices fail. In some cases the failure will be attributed to operator error, where the device was overloaded or misused but in some cases the design or the material or both were the cause of the failure. It is important that humans "learn from their mistakes" but what is even more important is that engineers "learn from other people's mistakes". Below you will find a list of infamous engineering disasters where a major engineering structure or device failed. Select one of these and after doing some research, prepare a report in your own words discussing how the material (and/or the chosen design) was responsible for the failure and what engineering information was learned from this disaster.

1- Tay Bridge, Scotland (1879)

2- Challenger space shuttle, USA (1986)

3- De Havilland Comet Air, Rome to London flight (1954)

4- Alaska MD-80 flight, USA (1999)

5- Eschede railway disaster, Germany (1998)

Your report should be between 1200-1500 words, should include references and diagrams where appropriate and should address the following points where applicable:

  • What material(s) and component failed and why?
  • Was this due to using the wrong material or was the design inappropriate?
  • What were the major engineering issues learned from this failure?

Reference no: EM13631561

Questions Cloud

A simple steam power system has a turbine inlet state of 60 : a simple steam power system has a turbine inlet state of 6.0 mpa and 540 0c and an exhaust pressure 0.008 mpa. the
Use y the height of the bead above its lowest point and : a pendulum of length l and mass m hangs from a bead of mass m that moves frictionlessly along the curve yx4 . use y the
Calculate the velocity at the exit of a diffuser when air : 1. calculate the velocity at the exit of a diffuser when air at 100kpa and 20oc enters it with a velocity of 500ms and
A how much work did the man do on the backpack while : a man carries a 50 kg backpack up a flight of stairs. each step is 10.0 cm high and the man climbs 150 steps. he then
Materials have been used in engineering applications for : materials have been used in engineering applications for thousands of years. sometimes these engineering structures or
The weights of all candy bars of this type are certainly : 1. the weights of all candy bars of this type are certainly not constant because of slight variations in the factory
Suppose that a nuclear plant generates heat in the amount : suppose that a nuclear plant generates heat in the amount of 2 x 107 j from its fuel rods at a temperature of 1200c and
If i mev of energy is deposited in an anthracene crystal : in anthracene scintillation photons have a wavelength of 447 nm. if i mev of energy is deposited in an anthracene
Remains constant if the value of sigma is known what is the : 1. other things being equal as the sample size increases the standard error of a statistica. increasesb.

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Find the temperature at the interface

a. Find the temperature at the interface between the rod and sleeve and on the outer surface. b. What is the temperature at the center of the rod?

  An air-conditioner with refrigerant -134a as the working

an air-conditioner with refrigerant -134a as the working fluid is used to keep a room at 26 celsius by rejecting the

  What is the required impeller diameter ratio between the

a 20 mw radial flow hydraulic turbine is to be designed with a head of 70 m and a speed of 90 rpm. a geometrically

  Determine the natural frecuency of the automobile

an automobile having a mass of 2000 kg deflects its suspension springs 0.02 m under static conditions. Determine the natural frecuency of the automobile in the vertical direction by assuming dumping to be negligible.

  Consider a building whose annual air conditioning load is

consider a building whose annual air conditioning load is estimated to be 120000 kwh in an area where the unit cost of

  Draw a sketch showing where those cracks initiate and

a simply supported wooden beam subjected to a uniformly distrubuted load is able to resist the bending stresses but

  Two rigid tanks are connected by a valve tank a contains 02

two rigid tanks are connected by a valve. tank a contains 0.2 m3 of water at 400 kpa and 80 percent quality. tank b

  Determine the time duration t of the elevator run

The main elevator A of the CN Tower in Toronto rises about 349 m and for most of its run has a constant speed of 22 km/h. Assume that both the acceleration and deceleration have a constant magnitude of g/3 and determine the time duration t of the ..

  Two blocks of steel cp011 btulbm ordmf one at 800ordmf and

two blocks of steel cp0.11 btulbm ordmf one at 800ordmf and the other at 300ordmf are brought into contact in an

  Calculate the final temperature in the small cylinder

If the filling is done rapidly, calculate the final temperature in the small cylinder, (a) assume that oxygen is an ideal gas with Cv= 5R/2 and (b) using accurate thermodynamic data for oxygen.

  Question a pump station has been designed to lift water out

question a pump station has been designed to lift water out of a 6 metre deep pit vented to atmosphere via a

  Argon in the amount of 06 kg fills a 005 m3 piston cylinder

argon in the amount of 0.6 kg fills a 0.05 m3 piston cylinder device at 550 kpa. the piston is now moved by changing

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd