User Account

All Pages

Magnitude of the initial angular acceleration

Assignment Help Physics
Reference no: EM131067281

A uniform rod of length 32 m and mass 21.7 kg is free to rotate about a friction less pivot atone end in a vertical plane, as in the figure.The rod is released from rest in the horizontal position. What is the magnitude of the initial angular acceleration of the rod? The acceleration of gravity is 9.8 m/s2. Answer in units of rad/s2.

Reference no: EM131067281

Questions Cloud

Original length of the wire : Under the action of load F1, the length of a string is L1 and that under F2, is L2. the original length of the wire is
What is the cost of the truck : What is the cost of the truck
Downward-directed electric field of the earth : A water droplet of radius 0.020 mm remains stationary in the air. If the downward-directed electric field of the Earth is 150 N/C, how many excess electron charges must the water droplet have? Express your answer using two significant figures.
Treat the hockey puck as a point mass : The string is pulled downward 19.5 cm through the hole in the friction less table. What is the magnitude of the work was done on the puck? Treat the hockey puck as a point mass. Answer in units of J.
Magnitude of the initial angular acceleration : What is the magnitude of the initial angular acceleration of the rod? The acceleration of gravity is 9.8 m/s2. Answer in units of rad/s2.
Discuss the importance of the performer body in the work : How are design and visual elements conceived of and explored in the work of [practitioner of your choice]? How are relations between performers and audiences conceived of and explored in the work of [practitioner of your choice]? Discuss the importan..
Velocity of the merry-go-round : The merry-go-round rotates with an angular velocity of 1.6 rad/s.The child then walks towards the center of the merry-go-round and stops at a distance 0.72 m from the center. Now what is the angular velocity of the merry-go-round? Answer in units ..
Explain the extrinsic vs intrinsic muscles : Explain the Extrinsic vs intrinsic muscles. Muscles can be divided into two distinctive groups; intrinsic and extrinsic. Extrinsic and intrinsic muscles are located in places such as the tongue, larynx, back, hand and foot muscles.
Difference in intellectual capacity and technical knowledge : This is an opportunity to make a connection with the course material in a creative way. Think of PRT experiences you have had that relate to what the authors discuss in the readings, and share connections and insights from your own personal experi..

Reviews

Write a Review

Physics Questions & Answers

  Find at what maximum speed can it go around a curve

A certain light truck can go around a curve having a radius of 104 m with a maximum speed of 37 m/s. To have the same acceleration, at what maximum speed can it go around a curve having a radius of 52 m

  What speedwill put the car on the verge of sliding

Suppose the coefficient of static friction between the road and the tiers on a car is 0.60 and the car has no negative lift. What speedwill put the car on the verge of sliding as it round a level curveof 30.5 m radius?

  Long mirrors stand vertically and are parallel to each other

Two 6 m long mirrors stand vertically and are parallel to each other 0.6 m apart.  A ray of light reflects off the very bottom of the mirror on the right with an angle of reflection of 49 degrees and bounces back and forth between the mirrors over..

  What is the charge on the top plate of this capacitor

A dielectric having dielectric constant ? = 3.2 is now inserted in between the plates of the capacitor as shown. What is the charge on the top plate of this capacitor

  Evaluate the time of flight of the cannon ball

Suppose you are a Medieval knight attacking a castle with a cannon. The ball leaves the cannon with a speed of 44.3 m/s. Evaluate the time of flight of the cannon ball

  Compute the peak value of the current

A 455pF capacitor is charged to 155V and then quickly connected to a 255mH inductor. Determine the peak value of the current

  Determine what is the work done by the force of gravity

A block of mass 2.50 kilogram is pushed 2.00 meter along a frictionless horizontal table by a constant 14.0 Newton force directed 25.0 degree below the horizontal. Calculate the work done by the force of gravity

  Neutron stars consist only of neutrons and have

neutron stars consist only of neutrons and have unbelievably high densities. a typical mass and radius for a neutron

  What force should be applied to the block to pull

A 240kg block with mass density of 1200kg/m^3 was accidentally dropped into water and sink. What force should be applied to the block to pull it out of water

  Over what distance should the lenses be movable

To focus a camera on objects at dissimilar distances, the converging lens is moved toward or away from the image sensor, so a sharp image always falls on the sensor. A camera with a telephoto lens (f=200.00mm) is to be focused on an object located fi..

  The peak value of the ac current in a circuit

The peak value of the ac current in a circuit is 6.0 A, and peak value of the ac voltage applied to the circuit is 4.7 V. What is the average power delivered to the circuit?

  Object experiences a constant acceleration

An object experiences a constant acceleration of 0.050 c/s in its own instantaneous reference frame. To an observer for which the object began at rest, how fast will the object be going after 20 s?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd