Liquid water state 1 and steam state 2 are mixed in a

Assignment Help Mechanical Engineering
Reference no: EM13629238

Liquid water (state 1) and steam (state 2) are mixed in a steady flow open feedwater heater and the mixture leaves at state 3. The flow rate at state 1 is 0.7 kg/s, the pressure is p1 = 1 bar, and the temperature is T1 = 40 C. The pressure at state 2 is p2 = 1 bar and the temperature is T2 = 400 C. The mixture leaves at p3 = 1 bar with quality x3 = 0.25. heat transfer from the feedwater heater is at a rate of 100 kW and leaves at an average boundary temperature of 50 C. then environmental conditions are T0 = 25 C and p0 = 1 bar.Determine the mass flow rate at state 2.

Reference no: EM13629238

Questions Cloud

A closed system contains 2kg of air undergoes an isothermal : in a close stationary system 2 kg of argon is heated from 20 degree c to 120 degree c. determine the amount of heat
The cannon points in the direction that the train is moving : a spring-loaded cannon aimed at 41 o above the horizontal is on the last car of a long train of flat cars. the train
Let the sign of q2 be changed from positive to negative at : an electric point charge of q1 5.03 nc is placed at the origin of the real axis. another point charge of q2 3.93 nc
Assuming that the water moves along the blade at a constant : a nozzle discharges a stream of water of cross-sectional area a with a velocity va. the stream is deected by a single
Liquid water state 1 and steam state 2 are mixed in a : liquid water state 1 and steam state 2 are mixed in a steady flow open feedwater heater and the mixture leaves at state
The width of the grand canyon varies from place to place : once upon a time a stunt man named evil knievel boasted that he would jump across the grand canyon on a motorcycle.
The velocity of a particle at t2 seconds is 50 ms with an : the velocity of a particle at t2 seconds is 50 ms with an angle of 40 degrees down and to the right. at t6 seconds it
Use this information about the overhead reach distances of : use this information about the overhead reach distances of adult females mean 205.5 cm sd 8.6 cm and over head reach
A derrick is capable of supporting 500000 lbf how many : a derrick is capable of supporting 500000 lbf. how many feet of 13 38 in 72 lbmft casing could be supported by the

Reviews

Write a Review

 

Mechanical Engineering Questions & Answers

  Determine a structures natural frequency

Determine a structures natural frequency. Sketch a typical time wave response curve of such a test, then label the impact point and indicate the test piece's natural frequency on the time waveform.

  What is the mass of one dart the mass moment of a dart is i

a spinning dartboard is used in a carnival game. the board is .4 m by .27 cm and has a mass of 950 grams. the operator

  Exhaust gases enter the regenerator at a pressure of 140

air enters a regenerator at a pressure of 1mpa temperature of 550 k and mass flow rate of 800 kkgmin. heat is

  The load to be applied to the chain is 9000 lbs plot the

suppose because of random variations introduced during fabrication the links of a chain have a random strength whereby

  This member is to be designed according to maximum shear

a solid square cross-sectional bar bxb with a yield stress of 250 mpa is subjected to a compressive axial force p 140

  What is the pump inlet condition for a rankine cycle the

a power plant using steam as the working fluid operates on a rankine cycle. the temperature at the condenser exit is

  A conveyor belt rises at a thirty degree angle its vertical

a conveyor belt rises at a thirty degree angle. its vertical hight measured from the ground is 20 ft sorry i cant seem

  Define geometric angle of attack

Geometric angle of attack, The Piper Cherokee has a wing area of 170 ft2 and a wing span of 32 ft. Its maximum gross weight is 2450 lbs. The wing uses a NACA 65-415 airfoil, which has a lift slope of 0.10331deg^-1 and alpha(L=0)= -3.0deg. Assume th..

  Motion of the threaded collars and is controlled by the

motion of the threaded collars and is controlled by the rotation of their respective lead screws. if has a velocity to

  An ice chest is constructed of 04 mm thick plain-carbon

an ice chest is constructed of 0.4 mm thick plain-carbon steel plate a 1.9 cm thick layer of styrofoam k0.033 wm c and

  A vertical shaft whose cross sectional area is 08 cm2 is

a vertical shaft whose cross sectional area is 0.8 cm2 is attached to the top of the piston. determine the magnitude f

  What is the torque available for acceleration what is the

a 3-phase 400 v 50 hz 6 pole cage induction motor of rating 20 kw with slip at rated load of 4 has a starting toque

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd