User Account

All Pages

Liquid water enters a pump at 15degc 100 kpa and exits at

Assignment Help Mechanical Engineering
Reference no: EM13632079

Liquid water enters a pump at 15°C, 100 kPa, and exits at a pressure of 5 MPa. If the isentropic efficiency of the pump is 75%, determine the enthalpy of the water at the pump exit, in KJ/kg.

Reference no: EM13632079

Questions Cloud

Water at 10 degrees c flows throug a smooth 60-mm-diameter : water at 10 degrees c flows throug a smooth 60-mm-diameter pipe with an average velocity of 8ms. would a layer of rust
Consider a system operating a power cycle between thermal : consider a system operating a power cycle between thermal reservoirs at temperatures th and tc where thgttc. using 1st
A diesel engine has a state before compression of 95 kpa : a diesel engine has a state before compression of 95 kpa 290 k a peak pressure of 6000 kpa and a maximum temperature of
Heat in the amount of 100 kj is transferred directly from a : 1. air is compressed by a 30 kw compressor from p1 to p2. the air temperature is maintained constant at 25 oc
Liquid water enters a pump at 15degc 100 kpa and exits at : liquid water enters a pump at 15degc 100 kpa and exits at a pressure of 5 mpa. if the isentropic efficiency of the pump
Determine the evaporator temperature at which a : the overall volume compression ratio of a reversed carnot cycle working with air as a refrigerant is 10. the
Combustion products with the molar anaylisis of 10 co2 20 : combustion products with the molar anaylisis of 10 co2 20 h2o 70 n2 enter an engines exhaust pipe at 1000f 1atm and are
If the static and kinetic friction coefficients between the : a spool of mass m214 kg inner and outer radii p1.84 m and r 2.23 m respectively and the radius of gyration kg 2m is
A 1 kg block of copper at 350degc is quenched in a 10 kg : a 1 kg block of copper at 350degc is quenched in a 10 kg oil bath initially at ambient temperature of 20degc. calculate

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Find the temperature of the combustion products of butane

find the temperature of the combustion products of butane when burned in an adiabatic steady flow combustor at 1atm

  Determine the size of the contact patch the contact

determine the size of the contact patch the contact stresses and the maximum shear stress for a 40 mm diameter steel

  The only information you have about a proposed site for a

the only information you have about a proposed site for a wind farm is that the wind blows at speeds above 25 ms 90 hrs

  The exit temperature of hot air is 20degc assuming constant

an adiabatic heat exchanger is used to heat cold water at 15degc entering at a rate of 5 kgs by hot air at 90degc

  What is the repair rate

If the unit can perform its function either in State 1 or 2, find the steady-state availability A for the device.

  R-134a vapor enters an adiabatic turbine at 250 psia and

r-134a vapor enters an adiabatic turbine at 250 psia and 175 f. the temperature at the outlet is 20 f. determine the

  Two of the three velocity components for an incompressible

two of the three velocity components for an incompressible flow are u x2 2xz vy22 yz what is the general form of the

  Just before arriving to its destination it decelerates at

train starts from rest and accelerates uniformly at 0.35g to reach its max speed of 150 mph. just before arriving to

  A stream of refrigerant-134a at 1 mpa and 12 c is mixed

a stream of refrigerant-134a at 1 mpa and 12 c is mixed with another stream at 1 mpa and 60 c. if the mass flow rate of

  Path b moves directly toward the fire what is the rate of

you are attending the bonfire before the homecoming football game. the temperature of the air varies inversely with

  Consider an accelerometer with a natural frequency of 800

consider an accelerometer with a natural frequency of 800 hz and a damping ratio of 0.6. determine the frequency range

  A rigid container is separated into 2 compartments by a

a rigid container is separated into 2 compartments by a very thin solid membrane. one side initially holds 2 m3 of air

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd