Inlet 1 is a saturated vapor with a flow rate of 034 kgs

Assignment Help Mechanical Engineering
Reference no: EM13618820

1) Air at the inlet of a nozzle is at 500 kPa, 42.2oC, and a velocity of 87 m/s. The nozzle exit pressure is at 132 kPa. Determine the nozzle exit velocity (m/s) if the adiabatic efficiency is 88.2%. Assume constant specific heats evaluated at 300 K (Cp = 1.005 kJ/kg-K, Cv = 0.718, and k = 1.4).

2) Air at the inlet of an ideal (reversible-adiabatic) compressor enters through a 0.037 m2 pipe at 141 kPa. The compressor exit pressure is at 540 kPa. Calculate the area (cm2) of the exit pipe if the inlet and exit velocities are equal. Assume constant specific heats evaluated at 300 K.

3) An insulated mixing box in an air-conditioning system is used to mix two streams of refrigerant R134a to produce a single stream. The pressure of each stream is 6 bar. Inlet 1 is a saturated vapor with a flow rate of 0.34 kg/s, and inlet 2 is at 40oC with a flow rate of 0.242 kg/s. Determine the rate of entropy production in the mixing box (kW/K). Assume steady state operating conditions.

Reference no: EM13618820

Questions Cloud

Estimation of the parameters for the normal and lognormal : estimation of the parameters for the normal and lognormal distributions.data set a 2 14 23 45 67 75 89 99 101 123 138
A find the magnitude of the final velocity of the 0151 : a 0.151 glider is moving to the right on a frictionless horizontal air track with a speed of 0.860 . it has a head-on
Estimation of the parameters for the normal and lognormal : estimation of the parameters for the normal and lognormal distributions.data set a 2 14 23 45 67 75 89 99 101 123 138
In order to drink from your glass you need to lift it to : in order to drink from your glass you need to lift it to your mouth. if your glass in now 0.18kg and accelerates to
Inlet 1 is a saturated vapor with a flow rate of 034 kgs : 1 air at the inlet of a nozzle is at 500 kpa 42.2oc and a velocity of 87 ms. the nozzle exit pressure is at 132 kpa.
Does this sample provide enough evidence to counter the : zingos grocery store claims that customers spend an average of five minutes waiting for service at the stores deli
Does this sample provide enough evidence to refute the age : bobs sporting goods believes the average age of its customers is 40 or less. a random sample of 60 customers was
What should be the total cross sectional area of the air : the bugatti veyron is the fastest street-legal production car in the world with a top-speed of 431 kmh at such high
The radial loads of both gears are in the same plane and : a shaft is to be designed to support the spur pinion and helical gear shown in the figure on two bearings spaced 700 mm

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  The outer diameter of this tube is 60 mm determine a the

a tube with elastic modulus of 75 gpa is used to support a compressive load. it is required that this tube must not

  Determine the mass flow rate of the air

Determine the mass flow rate of the air passing through this engine and the rates of heat addition and rejection when this engine produces 1000 hp. Assume constant specific heats at room temperature.

  A construction crew lifts approximately 560 lb of material

a construction crew lifts approximately 560 lb of material several times during a day from a flatbed truck to a 32 ft

  A 10 kw electric heater is used to heat 2 kg of air

a 10 kw electric heater is used to heat 2 kg of air contained in an insulated rigid tank from 400 kpa and 50 degc to

  Consider a cold canned drink left on a dinner table would

consider a cold canned drink left on a dinner table. would you model the heat transfer to the drink as one two or three

  Water flows through a 60 mm diameter tube that suddenly

water flows through a 60 mm diameter tube that suddenly contracts to 30 mm diameter. the pressure drop across the

  The rope holding the load is cut a how will the load move

a baloon rises with a constant velocity.a load is tied by a rope to the basket. when the baloon is at altitude h0 the

  A tube with elastic modulus of 75 gpa is used to support a

a tube with elastic modulus of 75 gpa is used to support a compressive load. it is required that this tube must not

  The objects are delivered to this belt with no slipping

small objects are delivered to the 72-in. inclined chute by a conveyor belt a which moves at a speed v1 1.2 ftsec. if

  What becomes of the extra energy

B) Determine the minimum amount of work [kJ ] required to reach this end state. C) If more than the minimum work is actually used, where does this extra energy go? That is what becomes of the extra energy?

  Monkey b is climbing up with a constant speed of 38 ftsec

three monkeys a b and c weighing 23 23 and 20 lb respectively are climbing up and down the rope suspended from d. at

  Draw a central cross-section of the heat exchanger

Derive at least four concept designs to satisfy the given specification - draw a central cross-section of the heat exchanger

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd