Implement the boolean function with 8-to-1-line multiplexer

Assignment Help Electrical Engineering
Reference no: EM13291945

Implement the following Boolean function with an 8-to-1-line multiplexer and a single inverter with variable D as its input:

F(A,B,C,D)= Em(2,4,6,9,10,11,15)

Reference no: EM13291945

Questions Cloud

A reaction be spontaneous product-favored at all temperature : For which set of values of DH and DS will a reaction be spontaneous (product-favored) at all temperatures
Perform the indicated arithmetic operations and verify : The following binary numbers have a sign in the leftmost position and, if negative, are in 2s complement form. Perform the indicated arithmetic operations and verify the answers. a.) 110001 - 010010
How many calories are needed by the person : Assuming that the total energy consumption scales in the same way as BMR, how many Calories are needed by the person weighing 150 lb
Describe the various actions : Describe the various actions that you might take and their implications.
Implement the boolean function with 8-to-1-line multiplexer : Implement the following Boolean function with an 8-to-1-line multiplexer and a single inverter with variable D as its input: F(A,B,C,D)= Em(2,4,6,9,10,11,15)
Estimate the resulting entropy change of the universe : An object of heat capacity 100 cal/°C is initially at 30°C. Estimate the resulting entropy change of the universe
Explain phenylphenol have a monosubstituted aromatic ring : Does 4-Phenylphenol have a monosubstituted aromatic ring ( or also known as monosubstituted aromatic overtone band [msoab] )
What target fa/sales raio should the company set : As part of that process, the company wants to set its target Fixed Assets/Sales raio at the level it would have had had it been operating at full capacity. What target FA/Sales raio should the company set?
Calculate the corrosion rate in mpy : Calculate the corrosion rate in mpy, pm/y, and mdd. What is the ranking of this carbon steel in this acid environment and determine the effect of time on the solution corrosiveness and the carbon steel corrodibility.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  How to connect the appropriate resistors-capacitors and vcc

You must use the internal resistance of the one shot, and an external resistor. Besides your calculations, draw the one-shot and show how to connect the appropriate resistors, capacitors, Vcc, etc

  Strategically identify new market opportunities

Market research and a competitive analysis are typically used in order to determine the feasibility of a new technology. How you could use advanced market research in order to remain competitive

  How the currents through the two transistors vary

The input of a lightly loaded transmission gate is slowly Ajit Pal, IIT Kharagpur Ajit Pal, IIT Kharagpur changes from HIGH level to LOW level. How the currents through the two transistors vary

  Determine what is the internal resistance of the battery

an ordinary flashlight battery is found to have a potential of 1.4 V when disconnected and a potential of 1.2V vhen connected to a resistance that has a producing a current of 0.004 A. what is the internal resistance of the battery

  Determine what is the mod number of the counter

A synchronous binary counter is used to divide a 1 MHz input frequency to 3.90625 kHz. What is the MOD number of the counter and how many flip-flops are required

  Explain how to produce a logig diagram for both designs

A circuit is needed to divide a 10 Hz signal down to 1 Hz. using only a 7493 4 bit counter produce a logig diagram for both designs , hook the clock input to a 10 Hz clock on the logic designer and hook the output clock to an LED.

  Determine what is the total antenna noise temperature

An earth station receive antenna has a sky component temperature of20 K, a ground component temperature of 15 K . What is the total antenna noise temperature [K]

  Determine the conductivity of silicon at t

Determine the conductivity of silicon at T = 300 K if it is doped with donor impurity atoms at a concentration of 1.25*1016 cm-3. Assume that the electron and hole mobilities are 1350 cm2 / V-s and 480 cm2 / V-s, respectively.

  What is the maximum frequency of the analog signal

A DSP system has a sampling frequency of 800 HZ. What is the maximum frequency of the analog signal so that the aliasing would not occur

  How much voltage is assumed dropped across a forward bias

(1) If you have a transformer that is not in a circuit, how can you tell/determine what the ratio is (2) How do you tell if a diode is forward or bias. How much voltage is assumed dropped across a forward biased silicon diode. Reversed biased sili..

  Determine the errors in serial transmission

A serial transmission is set up for 8 bits with odd parity. The first two bytes of data are 01110111 with parity bit 1 and 01101010 with parity bit 0. From this we know that there are no errors in transmission.

  Find transmission bandwidth of signal and deviation ratio

Maximum value of frequency deviation is fixed at 75 kHz for commercial broadcasting by radio. Modulation frequency W = 15 kHz, then find the transmission bandwidth of signal and deviation ratio.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd