If the specific heats cp1000jkgk and cv772jkgk what is the

Assignment Help Mechanical Engineering
Reference no: EM13643541

A non flow system undergoes a reversible process according to law p=4.5/v+2 where pressure p is in bar , specific volume v in m3/kg. During this process volume changes from 0.12 m3/kg. if the specific gas constant is 278j/kg-k, find p1 and T1 (in si units) p2 and T2, expansion work done during the process and whether the work is done on the system or BY the system, if the specific heats cp=1000j/kgk and cv=772j/kgk what is the change in internal energy and enthalpy of the gas going from process 1 to process 2.

Reference no: EM13643541

Questions Cloud

The inlet area of the compressor is 130 cm2 assuming : argon gs enters an adiabatic compressor under steady flow condition at 120 kpa and 30c with a velocity of 20 ms and
What is the specific gas constant for this gas in jkg-k : a cylinder has a capacity of 300 cubic feet and contains oxygen at a pressure of 3.1 mpa and temperature of 18 deg c.
During a certain process the specific hea capacity of the : during a certain process the specific hea capacity of the system is given by cn0.40.004t-273kjkg-k. temprature is
What are the charge density and total charge on each plate : two parallel metal plates have area a 255 cm2 and are separated by l 0.50cm. they have a potential difference of 0.25
If the specific heats cp1000jkgk and cv772jkgk what is the : a non flow system undergoes a reversible process according to law p4.5v2 where pressure p is in bar specific volume v
What are the charge density and total charge on each plate : two parallel metal plates have area a 255 cm2 and are separated by l 0.50cm. they have a potential difference of 0.25
Particle 1 is subjected to an acceleration a-kv particle 2 : particle 1 is subjected to an acceleration a-kv particle 2 is subjected to a-kt and particle 3 is subjected to a-ks.
A container of air with a fixed volume of 1 ft3develops a : a container of air with a fixed volume of 1 ft3develops a slow leak. the container originally is at 900 degrees at
A mixture of ordinary hydrogen atom and tritium a hydrogen : a mixture of ordinary hydrogen atom and tritium a hydrogen isotope whose nucleus is approximately 3 times more massive

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Determine the force that will produce an elastic reduction

A cylindrical bar of aluminum 19 mm (0.75 in) in diameter is to be deformed elastically by application of a force along the bar axis. Using E=10 psi (Modulus of Elasticity), determine the force that will produce an elastic reduction of 1e-4 in. in..

  The volume at the beginning of compression is three times

in an air compressor the pressure at inlet and outlet are 1bar and 5bar respectively. the temperature of the air at

  Determine the one machine that should be selected

If the minimum attractive rate of return is20% per year, determine the one machine that should be selected on the basis of a rate of return analysis.

  Calculate the quality if saturated or the temperature if

steam enters an insulated nozzle with a velocity of 500 ms and a pressure of 5.0mpa and a temperature of 600 degrees

  Determine a the exit velocity of the nitrogen and b the

nitrogen gas at 60 kpa and 7degc enters an adiabatic diffuser steadily with a velocity of 275 mls and leaves at 85 kpa

  If the largest internal crack in a polycarbonate sheet is

a. if the largest internal crack in a polycarbonate sheet is 0.100mm long and there are no surface cracks what is the

  A rankine steam power plant should operate with a high

a rankine steam power plant should operate with a high pressure of 3 mpa a low pressure of 10 kpa and the boiler exit

  A 500-hp hydroelectric plant generates power using water

a 500-hp hydroelectric plant generates power using water at a rate of 1000 ft2min with an overall efficiency of 35.

  Determine the net work per cycle in kj the power developed

the displacement volume of a six-cylinder diesel engine is 3 liters. the cycle can be modeled as an ideal diesel cycle

  Determine the dimensions of the rack structure

The rack structure will be built 2 ft above floor level, and the clearance between the rack structure and the ceiling of the building must be at least 18 in. Determine the dimensions (height, length, and width) of the rack structure.

  What is the required actual mechanic adcantage

A construction crew lifts approximately 560 lb of material several times during a day from a flatbed truck to a 32 ft rooftop. A block and tackle system with 50 lb of effort force is designed to lift the materials.

  Determine the factor of safety against brittle fracture

Determine the factor of safety against net section yield in the presence of the crack and determine the factor of safety against brittle fracture for the same conditions.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd