If the electric motor driving the pump has an efficiency of

Assignment Help Mechanical Engineering
Reference no: EM13612653

The system contains a fixed displacement pump with a pressure relief valve set at 1000psi. The system operates 20 hours per day for 250 days per year. The cylinder is stalled in its fully extended position 70% of the time. When the cylinder is fully extended, 1.0 gpm leaks past its piston.

a. If the electric motor driving the pump has an efficiency of 85% and the cost of electricity is $0.10 per kW hour, find annual cost of electricity powering the system.

b. It is being considered to replace the fixed displacement pump with a pressure-compensated pump (compensator set at 1000psi) that costs $2,500 more. How long will it take for the pressure-compensted pump to pay for itself if its overall efficiency is the same as the fixed displacement pump?

Reference no: EM13612653

Questions Cloud

Suppose x y and c represent the length width and perimeter : suppose x y and c represent the length width and perimeter of a flat rectangular sheet metal part. note that x is a
The building is estimated to be losing heat at a rate of : a heat pump is to be used to heat a building during the winter. the building is to be maintained at 22.9oc at all
Steam at 1 bar enters an adiabatic heat exchanger with a : steam at 1 bar enters an adiabatic heat exchanger with a quality of 0.896 and exits as a saturated liquid. the steam is
The temperature on the inner face is 25 degrees celcius and : a brick wall 3 m high 7.5 m wide and 200 mm thick has a thermal conductivity of 0.7 wmcelcius. the temperature on the
If the electric motor driving the pump has an efficiency of : the system contains a fixed displacement pump with a pressure relief valve set at 1000psi. the system operates 20 hours
The height of the water level in mineral water bottles has : the height of the water level in mineral water bottles has a mean of 140 mm and a standard deviation of 4 mm. assume
Air enters an adiabatic diffuser at 320 k and 100 kpa with : air enters an adiabatic diffuser at 320 k and 100 kpa with a velocity of 642.9 ms. at the diffuser exit the temperature
Saturated water vapor at 1332 bar enters an insulated : saturated water vapor at 13.32 bar enters an insulated throttling valve which drops the pressure to 1.50 bar. determine
Suppose xyand c represent the length width and perimeter of : suppose xyand c represent the length width and perimeter of a flat rectangular sheet metal part. note that xis a normal

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Find the power rating of the electric heater

find (a) the power rating of the electric heater and (b) the temperature rise that the air experiences each time it passes through the heater.

  Calculate the modulus of elasticity

Calculate the modulus of elasticity of the aluminium alloy. Use the modulus to determine the length of a 1.25 m bar to which a stress of 210 MPa is applied.

  Explain what will the ratio of the angle of twist

What will the ratio of the angle of twist be to that of the hollow shaft if the maximum shear stress in the material of 75 N / mm ^2 and what is the ratio of actual permissible shear stress?

  Determine the exit temperature

Determine (a) the exit temperature, (b) the exit relative humidity of the air, (c) the exit velocity.

  Determine the magnitude of the boats acceleration

Starting from rest the motorboat travels around the circular path,P = 50m , at a speed v=(0.8t)m/s, where t is in seconds. Determine the magnitude of the boat's velocity when it has traveled 40m. Determine the magnitude of the boat's acceleration ..

  Find the exit velocity of the neon

A turbine takes in 2 kg/s neon at 27C and 200 kPa with negligible velocity. The produced work is 75 kW and 30 kW of heat leaks into the turbine from the surroundings. The neon exits at 100 kPa and 230 K. Find the exit velocity of the neon.

  Estimate the theoretical fracture strength

Estimate the theoretical fracture strength of a brittle material if it is known that fracture occurs by the propagation of an elliptically shaped surface crack of length 0.16 mm and that has a tip radius of curvature of 0.002 mm when a stress of 1..

  Find the voltage induced in the conductor if the entire

a conductor 1 ft long moves at right angles to a uniform magnetic field. find the voltage induced in the conductor if

  Evaluate the reduction in pump bhp

Evaluate the reduction in pump BHP required by heating the oil from 50° F to 100° F. Suppose efficiency of 80% (HP)

  Air flows ocer the top and bottom surfaces of the plate and

a thin flat plate that is 0.2 m x 0.2 m on a side with rough top and bottom surfaces is placed in a wind tunnel so that

  The metal rhodium has a fcc crystal structure if the angle

the metal rhodium has a fcc crystal structure. if the angle of diffraction for the 311 set of planes occurs at 36.12deg

  Perform a comparative cost assessment

You are invited as an engineer to perform a study for a newly built community to cover their power need of 30 MW.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd