If initial and final pressures and volumes are the same as

Assignment Help Mechanical Engineering
Reference no: EM13624067

A gas initially at pinitial= 1 bar and occupying a volume (Vinitial) of 1 liter is compressed within apiston-cylinder assembly to a final pressure pfinal=4 bar

a) If the relationship between pressure and volume during the compression is pV = constant, determine the volume, in liters, at the final pressure.

b) If initial and final pressures and volumes are the same as in part (a), find the volume at 3 bar if the relationship between pressure and volume is linear.

c) Plot the processes in a) and b) on the same pressure-vs-volume diagram.

Reference no: EM13624067

Questions Cloud

Assume that the helium porosity in percentage of coal : assume that the helium porosity in percentage of coal samples taken from any particular seam is normally distributed
If the dipole comes to stable equilibrium at an angle of : a magnetic dipole is under the influence of two magnetic fields. the angle between the field directions is 60ordm and
Estimate the tensile strength of the wire and the work : estimate the tensile strength of the wire and the work required to take 1m3 of the wire to the point of necking. the
Determine the horizontal component of the earths magnetic : a compass needle free to turn in a horizontal plane is placed at the centre of circular coil of 30 turns and radius 12
If initial and final pressures and volumes are the same as : a gas initially at pinitial 1 bar and occupying a volume vinitial of 1 liter is compressed within apiston-cylinder
Explain qualitatively on the basis of domain picture the : answer the following questionsa explain qualitatively on the basis of domain picture the irreversibility in the
A tank originally contains 100 liters of water with a : a tank originally contains 100 liters of water with a concentration of 50 gl. water containing 200 gl is poured into
A gas contained within a piston-cylinder assembly undergoes : a gas contained within a piston-cylinder assembly undergoes three processes in series taking the gas from state 1
Why does a paramagnetic sample display greater : answer the following questionsa why does a paramagnetic sample display greater magnetisation for the same magnetising

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Determine the volumetric flow rate of air entering the

air at 101 kpa and 21 degree c dry bulb and 60 percent relative humidity enters an industrial dryer and is discharged

  Explain steam enters a turbine operating at steady-state

Steam enters a turbine operating at steady-state at 700 ºF and 600 lbf/in2 and leaves at 0.6 lbf/in2 with a quality of 90%. The turbine develops 12,000 hp

  Coding for computerized relative allocation of facilities

How to do matlab coding for computerized relative allocation of facilities technique

  What is the maximum height reached by the rocket b how long

a model rocket is launched straight upward with a speed of 50 ms. i accelerates with a constant upward acceleration of

  Determine the tension in each cable

The rigid L-shaped member ABC is supported by a ball and socket at A and by three cables. Determine the tension in each cable and the reaction at A caused by the 242 kg load applied at G.

  Knowing that at the instant shown the rod has an angular

the motion of the uniform slender rod of length l0.5 m and mass m 3 kg is guided by pins at a and b that slide freely

  The mass flow rate of the refrigerant is 450 kghr a

ammonia enters a heat exchanger operating atsteady state as a superheated vapor at 14 bar 60degc where itis cooled and

  What is the velocity of the block

The block is a cube that is 300mm on each side. Assume the block is incredibly tall. At steady state, what is the velocity of the block?

  Calculate the e?ciency of the furnace if the speci?c heat

Calculate the e?ciency of the furnace if the speci?c heat capacity of the water is cp = 4.2kJ/(kgK) and the zero level of enthalpy is at 0?C! (η = 79.6%)

  The potential at location c is 799 v and when released from

the potential at location a is 377 v. a positively charged particle is released there from rest and arrives at

  Water flows through a pipe ab 12 m diameter at 3 ms and

water flows through a pipe ab 1.2 m diameter at 3 ms and then passes through a pipe bc 1.5 mdiameter. at c the pipe

  A particle moves along the curve yx2 - 4m with a constant

a particle moves along the curve yx2 - 4m with a constant speed of 5 ms. determine the point on the curve where the

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd