How z axis field reduces to point charge at large value of z

Assignment Help Electrical Engineering
Reference no: EM13261338

Given the surface charge density,ρs =2μ c/m2 , exsisting in region ρ=0.2m, z=0, find E at (a) PA(ρ=0, z=0.5); (b) PB(ρ=0, z=-0.5). Show that (c) the field along the z axis reduces to that of an infinite sheet charge at small values of z; (d) the z axis field reduces to that of a point charge at large values of z.

Reference no: EM13261338

Questions Cloud

How fast is the bicycle going : If you detect a frequency shift of 195.4Hz in the 4000-Hz bell of a bicycle as it approaches and then leaves you, how fast is the bicycle going
What is the expected real intest rate : The two year interest rate is 13.8% and the expected annual inflation rate is 6.9%. What is the expected real intest rate?
Determine the angle between the two beams in the glass : A parallel light beam containing two wavelengths, 480nm and 700nm, strikes a plain piece of glass at an angle of incidence of 60 degrees. Determine the angle between the two beams in the glass
What is the forward rate of interest for the second year : The yield to maturity on one-year zero-coupon bonds is 8.1%. The yield to maturity on two-year zero-coupon bonds is 9.1%.
How z axis field reduces to point charge at large value of z : Given the surface charge density,ρs =2μ c/m2 , exsisting in region ρ=0.2m, z=0, find E at (a) PA(ρ=0, z=0.5); (b) PB(ρ=0, z=-0.5). Show that (c) the field along the z axis reduces to that of an infinite sheet charge at small values of z
What is the frequency of the fundamental oscillation : A cord of length 1.5 m is fixed at both ends. Its mass per unit length is 1.1 g/m and the tension is 11 N. What is the frequency of the fundamental oscillation
Find the total charge lying within the space : Within a region of free space, charge density is given as ρv=ρorcosθ/a c/m3, where ρo and a are constants. Find the total charge lying within (a) the sphere, r
Explain volumes listed correspond to the equivalence point : The volumes listed correspond to the ½ equivalence point, equivalence point, 1 ½ equivalence point, and 2 equivalence point. The pH will equal pKa2 at the 1 ½ equivalence point, which is 11.55. Therefore, the [H+] = 10^(-11.55) = 2.81 x 10-12
Prepare a multi-step income statement : Prepare a multi-step income statement and a classified balance sheet in proper form using accrual accounting.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Find the net heat transfer for the process in kj

50 kg of a certain gas is contained within a piston-cylinder assembly. the gas undergoes a processwhich the pressure volume relationship is PV = constant. (n=1.5) the given conditions as follows : p1= 6 bars, v1=0.2 cubic meters ,and v2= 0.4 cubic..

  What is the total distance moved by the ball

A ball is thrown vertically upwards from a point 1.5 m above the ground, with an initial velocity of 30 m/s. In this problem, neglect the effects of air on the motion of theball, and take g = 10 m/s2. what is the total distance moved by the ball

  What is the velocity at the end of the pipe

Seawater with a specific weight of 64.0 lbs/ft^3 is at a level of 4 feet above the centerline of the exit pipe. The tank is closed at the top and there is a pressure of 1 psig above the seawater. What is the velocity at the end of the pipe

  Find out the range of values of k such that the system

Determine the range of values of K such that the system is stable for s(s²+4s+10)+ k (s+5)=0

  Find maximum reverse voltage that will appear across diode

It is required to use a peak rectifier to design a dc power supply that provides an average dc output voltage of 15 V on which a maximum of 1-V ripple is allowed. The rectifier feeds a load of 150 ohm.

  Determine the cross-sectional area of the core

A single phase transformer has the following rating: 120 kVA, 2000 V/100 V, 60 Hz with 1000 primary turns. Determine (A) the maximum flux. (B) given a maximum flux density of 0.25 T, the cross-sectional area of the core.

  What will be the output voltage from the bridge for a change

What will be the output voltage from the bridge for a change in temperature of 20o C The supply voltage to the bridge is 6.0 V and the temperature coefficient of resistance of the platinum is 0.0039 K-1.

  Determine the value of r2 in ohms

Two resistances R1 and R2 are connected in series. We know that R1=60 ohms and that the voltage across R2 is three times the value of the voltage across R1. Determine the value of R2.

  Determine the average-real power that must be supplied

An industrial load consumes 88 kW at a power factor of 0.707 lagging from a 480 Vrms line. The transmission line resistance (Rline) from the power company's transformer to the plant is 0.08 Ohms.

  What environmental factors should you consider

You do some quick measurements and find that the area of the lagoon behind the dam would be about 5m wide by 20m long, and the lagoon would be about 3m deep at high tide, and 1m deep at low tide.

  Explain what are the distinguishing features of the response

What are the distinguishing features of the response in the pass-band? What are the distinguishing features of the response in the stop-band? What is an all pass filter?

  What is the phase angle between the line current

Assume the motor is connected in wyne and that each branch can be represented by a resistance R in series with an inductive reactance X. (a) Calculate the value of R and X. (b) What is the phase angle between the line current

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd