How much time passes before the players collide

Assignment Help Electrical Engineering
Reference no: EM13269334

Two soccer players start from rest, 34 m apart. They run directly toward each other, both players accelerating. The first player's acceleration has a magnitude of 0.42 m/s2. The second player's acceleration has a magnitude of 0.41 m/s2. (a) How much time passes before the players collide? (b) At the instant they collide, how far has the first player run?

Reference no: EM13269334

Questions Cloud

Determine what is the cars displacement : You are driving your car, and the traffic light ahead turns red. You apply the brakes for 2.70 s, and the velocity of the car decreases to + 4.71 m/s. The car's deceleration has a magnitude of 3.41 m/s2 during this time. What is the car's displace..
The direct and indirect presentation of cash flows : Write a 350-word response regarding the differences between the direct and indirect presentation of cash flows. Why does the Financial Accounting Standards Board allow both methods? Which do you prefer? Why?
What is the amount of projected liabilities : Sales are expected to increase by 6.5 percent next year. If all assets, short-term liabilities, and costs vary directly with sales, answer the following questions.
Explain what is the degree of purification : what is the degree of purification (fold purification). what is the percent yield of the enzyme recovered in the purified fraction
How much time passes before the players collide : Two soccer players start from rest, 34 m apart. They run directly toward each other, both players accelerating. The first player's acceleration has a magnitude of 0.42 m/s2. The second player's acceleration has a magnitude of 0.41 m/s2.
Should company accept or reject the project : Because the two divisions are the same size, the company has composite of WACC of 11%. Division B is considering a new project with an expected return of 12%.
Milton manufacturing company : Milton Manufacturing Company
Determine what is the stopping distance of the car : Suppose a car is traveling at +23.2 m/s, and the driver sees a traffic light turn red. After 0.563 s has elapsed (the reaction time), the driver applies the brakes, and the car decelerates at 7.00 m/s2. What is the stopping distance of the car
Determine the linear mass density of the string : A guitar string has a tension on it of 6500 N and length of 1.2 m. what is the linear mass density of the string

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Determine what is the max height obtained

A ball is shot into the air at 30 degress above the horizontal. It's initial Velocity is 5m/s and lands at the same height that it is launched from. How far does it travel horizontally

  Does the generation of a random number help avoid collision

In a bus 1-persistence CSMA/CD with Tp=50us and Tfr=120us, there are two stations, A and B. Both stations start sending frames to each other at the same time. Since the frames collide, each station tries to retransmit.

  Find the max and min skew values

There are 2 stages of pipeline. 1st stage: max delay 6.5ns, min delay 2.5ns. 2nd stage: max delay 5ns, min delay 2ns. Setup time, hold time and flip flop delays = 0.1ns.

  Determine the inductance in h-m and the inductive reactance

A 60 Hz, 765 kV three-phase overhead transmission line has four ACSR 1113 kcmil 54/3 conductors per phase. Determine the 60 Hz resistance of this line in ohms per km per phase at 50o C.

  How sensitive is the ror to the salvage value

You are evaluating the feasibility of adding an injection molder to fabricate plastic sporks (everybody’s favorite harmless utensil) for the US Facility for the Criminally Insane. An injection molder will cost $1,200,000 installed.

  Find the value of gv obtained with rl reduced

If the signal amplitude across the base-emitter junction is to be limited to 10 mV, what is the corresponding amplitude of vsig and v0 Find the open-circuit voltage gain Gvo and the output resistance Rout. Use these values first to verify the value ..

  Find velocity of electrons that are moving only by diffusion

A general relationship for the current density carried by electrons of density n is J = qnv, where q is the electronic charge and v is the electron velocity due to drift and/or diffusion. (a) Find the velocity of electrons, v(x), that are moving on..

  Decribe the signal that will come out of the lti system

A sinusoidal signal described by Cos (2pit+pi/4) passes through a linear time invariant (LTI) system that applies a gain of 2 and a time delay of 0.125 seconds to the signal. Write the mathematical expression that decribes the signal that will com..

  Design an open-ended shunt stub matching network

A half-wave dipole antenna has an input impedance Zant = 73.2 + j42.5 ohms. Design an open-ended shunt stub matching network to match this antenna to a 50ohm line.

  Determine the period-frequncy and effective value

For each of the following waveforms, determine its period, frequncy, and effective value a) 5 V b) 2sin80t-7cos20t+5 V c) 5cos50t+3sin50t V d) 8cos^290t mA

  Calculate the emf between the center of the disk and its rim

A plane circular disk of radius 0.25m rotates at a speed of 200 rad/s about an axis through the center of the disk perpendicular to the plane of the disk. There is a uniform magnetic flux B = 1 Tesla parallel to the axis of rotation.

  Find the symmetrical components of the line currents

A balanced D-connected load is fed by a three-phase supply for which phase C is open and phase A is carrying a current of 10

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd