User Account

All Pages

Heat transfer from the nozzle to the surroundings is 167 kw

Assignment Help Mechanical Engineering
Reference no: EM13622430

Steam enters a nozzle at 8 MPa, 400oC, with a velocity of 36.9 m/s. At the exit of the nozzle, the pressure and temperature are 4 MPa and 280oC, respectively. Heat transfer from the nozzle to the surroundings is 167 kW. Determine the nozzle exit velocity (m/s) if the mass flow rate is 2.22 kg/s.

Reference no: EM13622430

Questions Cloud

What will be the smallest distance between the two charges : two positive point charges q 80 nc and q 45 nc are held at rest one directly above the other a distance 17 cm apart.
The ball sticks in the barrel at the point of maximum : a ball mass m60g is shot with speed vi22ms into the barrel of a spring gum of mass m240g initially a rest on a
Fr an output power of 316 hp we have nm 1483 rpm and ia : a shunt dc motor has ra 0.3 u03a9 and vt 999.9 v. for an output power of 31.6 hp we have nm 1483 rpm and ia 145.8 a.
Fifty sampling units of equal size were inspected and the : fifty sampling units of equal size were inspected and the number of nonconforming situations was recorded. the total
Heat transfer from the nozzle to the surroundings is 167 kw : steam enters a nozzle at 8 mpa 400oc with a velocity of 36.9 ms. at the exit of the nozzle the pressure and temperature
Cronbachs alpha and the split-half reliability coefficient : cronbachs alpha and the split-half reliability coefficient are both instruments to determine the reliability of a
The loop is in a uniform magnetic field of magnitude 909 mt : a single-turn current loop carrying a current of 4.87 a is in the shape of a right triangle with sides 49.1 173 and 180
Calculate a prediction for the amount of warpage of a : a sample of 25 pieces of laminate used in the manufacture of circuit boards was selected and the amount of warpage in.
How much capital would be released if lamar could take : lamar lumber company has sales of 12 million per year all on credit terms calling for payment within 30 days and its

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  What do yo undestand by the term base quantity list the

what do you understand by the term quantity with reference to vim? list three different base quantities and indicate

  Determine the thermal efficiency and the required steam

determine the thermal efficiency and the required steam flow rate kgs for a reheat-regenerative steam power plant which

  Apparent density and theoretical density and void volume

Apparent Density, Theoretical Density and Void Volume, A compacted body of iron powder is sintered into a 20mm-diameter, 45-mm-tall cylinder which, upon weighing

  An airplane flies horizontally at 550 ms its

an airplane flies horizontally at 55.0 ms. its propellernbspdelivers 1500 n of thrust forward force to overcome

  What is the corresponding change in heat flux through the

consider a roof of a house of thickness l 20 cm thermal conductivity k 1 wm k and emittance of the external surface

  An airplane moves forward at a speed w1 971 kph the frontal

an airplane moves forward at a speed w1 971 kph. the frontal intake area of the jet engine is a1 0.8 m2 and the

  Find the percent increase in the volume

An air bubble rises from the bottom of a well where the temperature is 25°C, to the surface where the temperature is 27°C. Find the percent increase in the volume of the bubble if the depth of the well is 5 m. Atmospheric pressure is 101,528 Pasca..

  The bottom wall of the channel is noticeably rough at a

considerr mach 2 flow in a twodimensional rectangular channel of length 5 m and height 1 m. the bottom wall of the

  Saturated properties out of the evaporator

Assuming saturated properties out of the evaporator and condenser

  Determine the value of force when the rod begins to yield

A 20-mm diameter rod made of a ductile material with a yield strength of 350 MPa is subjected to torque of 100 N.m and a bending moment of 150 N.m. An axial force is then gradually applied. Determine the value of force when the rod begins to yield..

  Determine the amount of heat that must be removed

A vessel with a volume of 0.0011 m3 is filled with dry saturated steam at a pressure of 95 kPa. It is then sealed and cooled to 250C. Determine the amount of heat that must be removed.

  The top surface of the oil in the manometer is even with

a closed tank has an enclosed airspace above the surface of water which fills the tank to a depth of something over a

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd