For radio channels the constellation size is often

Assignment Help Electrical Engineering
Reference no: EM131016750

For radio channels the constellation size is often 4, for moderate signal to noise ratios. for such a constellation size in a 5 MHz channel using QAMP with no intersymbol interferance, what is highest bit rate ?

 

Reference no: EM131016750

Questions Cloud

What can be done with process technology : In this era of rapid change and short product lifetimes (e.g. Apple Corp.), what can be done with process technology to be able to continue to produce several generations of a product? How might this fact enter into the decisions related to capaci..
What is the project payback period : a. What is the project's NPV? b. What is the project payback period? c. What is the project's profitability index?
Find the pdf of y : The length of time to failure (in hundreds of hours) for a transistor is a random variable Y with cumulative distribution function given by the following: F(y)-e-y^2 for y >- greater than or equal to 0. a. Find the pdf of y.
Describe how apparatus might be used to measure viscosity : The viscosity, µ of a liquid can be measured by determining the time, t, it takes for a sphere of diameter, d, to settle slowly through a distance, l, in a vertical cylinder of diameter, D, containing the liquid. Use dimensional analysis to show h..
For radio channels the constellation size is often : For radio channels the constellation size is often 4, for moderate signal to noise ratios. for such a constellation size in a 5 MHz channel using QAMP with no intersymbol interferance, what is highest bit rate ?
The operations did not go well and the partners : The Field, Brown & Snow partnership was begun with investments by the partners as follows: Field, $131,250; Brown, $165,000; and Snow, $153,750.
What is the projects npv : A) What is the projects NPV B) What is the projects payback period C) What is the projects profitability index D) What is the projects IRR
A 480 v(rms) source supplies 3 parallel loads : A 480 V(rms) source supplies 3 parallel loads: -load 1: P1 = 25kW and Q1 = 25 kVAr, no power factor given, no Resistance(R1) given -load 2: S2 = 15kVA at power factor 0.8 leading,P2 and Q2 not given and no R2 given
Find this equation showing all the work you did : Suppose you are asked to find the equation in slope-intercept form of a straight line that has slope = 4 and contains the point (100, 50). Find this equation, showing all the work you did.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  What is the speed of flow in the narrow section

Water is flowing at 3 m/s in a horizontal pipe under a pressure of 200 kPa. The pipe narrows to half its original diameter. (a) What is the speed of flow in the narrow section?

  Elements of electric motor drive systems

Describe, with the aid of diagrams, the electric drive system of your practical or researched system - discuss in detail each of the following elements of electric motor drive systems,

  Give the fourier transform of the signals that can be obtain

Any causal signal x(t) having a Laplace transform with poles in the open-left s-plane (i.e., not including the jΩ axis) has, as we saw before, a region of convergence that includes the jΩ axis, and as such its Fourier transform can be found from i..

  Consider a one dimensional crystal with a total of six

consider a one dimensional crystal with a total of six atoms each with mass m seperated by a lattice constant of 0.5

  Determine values for a and b that will satisfy constraints

Suppose we want to construct an amplifier with a closed-loop gain of 50. We want the gain to vary by no more than +/- 5% while the open-loop gain varies by +/- 50%. Determine the values for a and b that will satisfy these constraints.

  Find operating point of diode to atleast significant figure

Find the operating point ofeach diode to at least four significant figures using the iterativemethod and the value Vt = 25mV. This problem is more difficult thanthose presented in the text because the iteration must proceed over three elements

  Determine what is the transverse periodicity of the object

If the self-imaging planes are 1 cm apart, what is the transverse periodicity of the object. Assume the wavelength of illumination as 1 micron. find the locations of the planes where one can observe contrast reversal.

  What is the maximum signal amplitude station can permit

a) What is the minimum bandwidth that they need b) If the carrier amplitude in the transmitter (before the power amplifier at the output) is 5V, what is the maximum signal amplitude they can permit in the transmitter without introducing distortion

  Determine what must the smaller resistor be adjusted to

(a) What must the smaller resistor be adjusted to, if the larger resistor is 100 k-ohm (b) If the smaller resistor is to be formed by a pair of resistorsin parallel, with what resistor must a 2-k resistor be connected in parallel at the input to a..

  Find relative probability of finding electron at a distance

Determine the relative probability of finding the electron at the distance (a) 12 A beyond the barrier, and (b) 48 A beyond the barrier, compared to the probability of finding the incident particle at the barriers edge. Plot the wave function for ..

  What value of input capacitor would be adequate to couple

If we now decide to use Rg = 1K ohm, what value of input capacitor would be adequate to couple at least 95% of the voltage of a sinusoidal input signal of 10 KHZ to the GATE OF COMMON SOURCE AMPLIFIER

  Find impedance of scope probe and oscilloscope combination

When the scope probe is properly calibrated, it can be modeled as a 9[M Ohm] resistor in parallel with a capacitor having a capacitance l/9th that of the oscilloscope input capacitance.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd