Fluid is ethylene glycol under the same flow conditions

Assignment Help Mechanical Engineering
Reference no: EM13701075

For a laminar boundary layer flow over a flat plate with air at 20°C and 1atm, the thermal boundary layer thickness Dt is approximately 13% larger than the velocity boundary layer thickness D. Determine the ratio D/Dt if the fluid is ethylene glycol under the same flow conditions.

Reference no: EM13701075

Questions Cloud

What might account for differences between equilibrium : In the textbook Sodium and Chlorine are listed as having ionic radii of 0.98 and 1.81 Å respectively. NaCl can form a face-centered cubic unit cell. What is the lattice constant of such a unit cell? What might account for the differences between the ..
Assuming complete combustion and constant specific heats : Calculate adiabatic flame temperature butane (C4H10) burning in air at 298 k and 1 atm, assuming complete combustion and constant specific heats
What is the local heat transfer coefficient : Air at a pressure of 1 ATM, a temperature of 15° C, and a velocity of 10 m/s flows over a 3 m long flat plate that is heated to a uniform temperature of 140° C. What is the local heat transfer coefficient 3m from the leading edge of the plate?
Calculate the average temperature of the plate surface : Air at atmospheric pressure and a temperature of 25°C is in parallel flow at a velocity of 5 m/s over a 1m long flat plate that is heated with a uniform heat flux of 1250 W/m2. Assume the flow is fully turbulent over the length of the plate.
Fluid is ethylene glycol under the same flow conditions : For a laminar boundary layer flow over a flat plate with air at 20°C and 1atm, the thermal boundary layer thickness Dt is approximately 13% larger than the velocity boundary layer thickness D. Determine the ratio D/Dt if the fluid is ethylene glycol ..
Piston cylinder device contains : A piston cylinder device contains .733 kg of refrigerant-134a at -10 degrees C. The piston that is free to move has a mass of 8.63 kg and a diameter of 21.2 cm. The local atmospheric pessure is 88 kPa. Now, heat is transferred to the refridgerant-134..
How many times can he jump on his bed before beam breaks : After one particularly wild night at the bars, Jon decides to come home and jump on his bed .Assume that he's jumping directly in between one steel support beam that's 10 foot long, 2 inches wide and 1 inch thick. Further assume that Jon weighs aroun..
What is tension in swing cable developed during the motion : A gentry structure, similar to a tire swing, is used to test the response of an airplane is hoisted back until the 20m swing cable is at theta=60. Determine the speed of the plane just before crashing into the ground at theta=15, when released from r..
Determine the maximum power supplied by the engine : A sports car has a mass of 2000 kg and an engine running at an efficiency of 0.63, as it moves forward with a constant velocity of v=50 m/s,the wind creates a drag resistance on the car of FD=1.2v^ newtons. Determine the maximum power supplied by the..

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Refrigerant-134a is gaining heat at a rate of 4 kws as it

refrigerant-134a is gaining heat at a rate of 4 kws as it passes trough the diffuser. it enters the diffuser as

  If the density of the aniline is 1002 kgm cube and the

a centrifuge bowl with 250mm internal diameter is turning at 4000 rmin. it contains a layer of aniline 50mm thick. if

  What is the entropy changedetermine the change in entropy

air is compressed in a standard compressor. its intital state is 100 kpa at 17 c and its final state is 600 kpa and 57

  The coefficient of restitution between each car is 08

at an amusement park there arae 200kg bumpers car ab and c that have riders with masses of 40 kg 60kg and 35 kg

  The motion of a particle is defined by the relation

the motion of a particle is defined by the relation 2t3-9t212t10 where x and t are expressed in feet and seconds

  Air can be assumed to be an ideal gas with a

a well-insulated tank contains 1 mole of air at 2 mpa and 673 k. it is connected via a closed valve to an insulated

  Consider oxygen at 100 bar and specific volume of 008

consider oxygen at 100 bar and specific volume of 0.08.a calculate the temperature t using the van der waals equation

  A spherical hot-air balloon is initially filled with air at

a spherical hot-air balloon is initially filled with air at 120 kpa and 35oc with an initial diameter of 3 m. air

  The mass of the pole is 25 kgthe forces of the vaulter must

a pole-vaulter is holding the vaulting pole parallel to the ground. the pole is 5 m long. the vaulter grips the pole

  For an enlarged control volume that includes the turbine

steam enters a turbine operating at steady state at a pressure of 1000 lbfin2 and a temperature of 1100degf and exits

  Determine the steady state irreversibility rate of each

the surface temperature of a 100 w incandescent lightbulb is 60.0degc. the surface temperature of a 20.0 w fluorescent

  Water is being pumped from a large lake to a reservoir 25m

water is being pumped from a large lake to a reservoir 25m above at a rate of 25 ls by a 10kw shaft pump. if the

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd