Find total complex power absorbed by the wye-connected load

Assignment Help Electrical Engineering
Reference no: EM13229635

A tree-phase, 60Hz, 5MVA synchronous generator has balanced line-to-line voltages of 8320V at its terminals. if the generator is supplying power to delta-connected, balanced load of 5MVA at a 0.8 lagging power factor, determine the following: (a)The total complex power absorbed by the wye-connected load (b)the load impedance per phase.

Reference no: EM13229635

Questions Cloud

What should the surface concentration of the boron implant : A Si sample is uniformly doped with phosphorus at 5 E 16 cm^-3. We make a p-n junction by implanting boron atoms into the surface layer. The implanted depth is 0.15 µm. What should the surface concentration of the boron implant
Explain starting with pure nacl and water : Starting with pure NaCl and water, describe how you would prepare 25.00 mL of a NaCl solution? Assume you know how much NaCl you need to weigh on the balance.
Determine the uncorrected poer factor and reactive load : A 2.4KV, single-phase circuit suppllies a load of 250KW at a lagging power factor, and the load current is 160A. If it is necessary to improve the power factor, determine the following: (a)The uncorrected poer factor and reactive load.
The volume change as the result of the addition of the solid : What amount of solid NaOH must be added to 1.0 L of a 0.15 M H2CO3 solution to produce a solution with [H+]=3.3*10^-11 M ? There is no significant volume change as the result of the addition of the solid.
Find total complex power absorbed by the wye-connected load : A tree-phase, 60Hz, 5MVA synchronous generator has balanced line-to-line voltages of 8320V at its terminals. if the generator is supplying power to delta-connected, balanced load of 5MVA at a 0.8 lagging power factor
Determine the molar mass of the acid : A 0.868 g sample of an unknown acid requires 32.8 mL of a 0.180 M barium hydroxide solution for neutralization. Assuming the acid is diprotic, calculate the molar mass of the acid
Determine the value of the capacitor in uf : determine the following. (a) The line current (b) The value of the capacitor in uf per phase, is a wye-connected capacitor bank is used to correct the power factor to a 0.95 lagging power factor.
Determine the total complex power provideed by the generator : A three-phase, 60Hz, wye-connected synchronous generator has balanced line-to-line voltages of 480V at its terminals. The generator is supplying power to two balanced and delta connected, three-phase loads. the first load is made up of three.
Write algorithm to subtract 32 from fahrenheit temperature : Write a main program to call a procedure that converts the Fahrenheit temperature value stored in the location labeled TdegF to its Celsius equivalent. The range of temperatures is 32°F to 212°F. The procedure stores the converted temperature

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Nibco''s big bang - an sap implementation

Analyze Case Study - NIBCO's 'Big Bang': An SAP Implementation- Explain the pros and cons of the approach to implementation decided upon by NIBCO.

  Determine the bandwidth of the modulator output

A sinusoidal message signal has a frequency of 10 Hz. The signal is the input to an FM modulator with an index of 8. Determine the bandwidth of the modulator output if a power ratio, Pr = 0.8 is required.

  Write a matlab program to compute the capacity

Write a MATLAB program to compute the capacity of an AWGNC with a given bandwidth and for equally spaced values of between and including and (in dB).

  Determine the range of the gain k for a system

A single-loop negative feedback system has the loop transfer equation: L(s) = Gc(s)G(s) = K(s + 2)2 / (s(s2 + 1)(s + 8)) a. Sketch the root locus for 0 K  infinity to indicate the significant features of the locus.

  Determine the heat input of the steam generator

pressure limits of 10 kPa and 8 MPa, with reheat occurring at 4 MPa. The temperature of steam at the inlets of both turbines is 500°C, and the enthalpy of steam is 3185 kJ/kg at the exit of the high-pressure turbine

  What is the actual value of the irr on the incremental cost

a) Construct a choice table for interest rates from 0% to 100%. b) Which roof should you choose if your MARR is 12% what is the actual value of the IRR on the incremental cost?

  Find the applied voltage of an iron-core transformer

Find the applied voltage of an iron-core transformer if the secondary voltage is 240 v, and Np = 60 with Ns = 720

  Calculate the mass fraction of helium and the mass density

A He-Xe mixture containing 0.75 mole fraction of helium is used for cooling of electronics in an avionics application. At a temperature of 300 K and atmospheric pressure, calculate the mass fraction of helium and the mass density.

  Find the radius of equipotential surfaces having potentials

A very long cylinder of radius 2.00 cm carries a uniform charge density of 1.50 nC/m. Taking the reference level for the zero of potential to be the surface of the cylinder, find the radius of equipotential surfaces having potentials of 10.0V, 20...

  Calculate the power converted to mechanical power

A 480 V permanent magnet ac motor is consuming 10 kW at power factor 0.80 lagging. Its speed is 1800 rpm. The winding resistance is 0.5 ohms per phase. Core losses are 100 W. Mechanical losses are 250 W. Stray losses are 1.5% of the input power

  Calculate the output resistance of the device

Calculate the output resistance of the device, dIC/dVC, for 0

  Shielding effectiveness with copper also steel at equality

Shielding Effectiveness with copper and steel at equality, Determine the frequency at which two 1 mm thick shields, one made of copper and the other of steel

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd