Find the viscosity of the emulsion

Assignment Help Mechanical Engineering
Reference no: EM13703916

You are asked to measure the viscosity of an emulsion, so you use a tube flow viscometer, with the container open to the atmosphere. The length of the tube is 10 cm, its diameter is 2mm, and the diameter of the container is 3 in. When the level of the sample is 10 cm above the bottom of the container the emulsion drains through the tube at a rate of 12 cm^3/min, and when the level is 20 cm the flow rate is 30cm^3/min. the emulsion density if 1.3g/cm^3.

Find the viscosity of the emulsion?

 

What would the sample viscosity be at a shear rate of 500s^-1

Reference no: EM13703916

Questions Cloud

Determine the volume change : Determine the volume change, in ft^3, when 1 lbm of water, initially saturated liquid, is heated to saturated vapor while pressure remains constant at: Sketch a T-v diagram and indicate all relevant state points (eight total points).
Torsion spring to inverted pendulum : If you attach torsion spring to inverted pendulum, is this the equation of motion? The spring is attached on one end to a pivot point and also at the pivot point the spring is attached. I used L/2 for the location of the center of mass.
What is the maximum available friction force : A block weighing 80 N is resting on a plane inclined 20 degree to the horizontal. The coefficient of static friction is 0.5. Determine the friction force on the block. What is the maximum available friction force?
Velocity and acceleration analysis of mechanism : Velocity and Acceleration Analysis of mechanism. The mechanism in Fig. 5.54 has the dimensions: AB=200 mm, AC=600 mm, BD=1000 mm, La=150 mm, and Lb=250 mm. The driver link 1 rotates with a constant angular speed of n=60 rpm. Find the velocities and t..
Find the viscosity of the emulsion : You are asked to measure the viscosity of an emulsion, so you use a tube flow viscometer, with the container open to the atmosphere. The length of the tube is 10 cm, its diameter is 2mm, and the diameter of the container is 3 in.
Implement a program for this machine : Implement a program for this machine - design a special ATM machine to be used by needy people.
Amount of the prospective future receipts from the wells : A petroleum engineer estimates that the present production of 400,000 barrels of oil during this year from a group of 10 wells will decrease at the rate of 15% per year for years 2 through 10. Oil is estimated to be worth $25 per barrel. If the inter..
Assume a constant specific heat capacity : Argon is contained in a 1 L piston-cylinder device at T=300 K and P=100 kPa. Heat is added and the volume is allowed to expand at constant pressure. If the final temperature is 400 K, find the heat added. Assume a constant specific heat capacity. Exp..
Conventional lead-acid automobile battery : The cold cranking amperes (CCA) of a conventional lead-acid automobile battery is the amount of current the battery can provide at 0°F for 30 seconds and maintain at least 1.2 volts per cell (or 7.2 volts for a standard 12-volt battery). If a batter..

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  A particle initially located at the origin has an

a particle initially located at the origin has an acceleration of 2.6 ms2 and an initial velocity of i 5.3 ms.a find

  The plant manager decided to build a model however test

axial flow coolant pump for one lop pressurized nuclear reactor has 75 m head 6m3s flow rate 1440rpm 800 mm diameter

  The water leaves the tube leaves at the 1mpa and 300oc with

water at 1mpa and 65oc enters a tube of a boiler which has a constant 160mm inside-diameter. the water leaves the tube

  Also assume that all heat rejection processes are to a low

a gas turbine power plant operates under the brayton cycle which is non-ideal due to heat losses from the compressor

  An electric motor drives a propeller inside the tank until

a closed well insulated tank contains 10 kg of air at 300 k. an electric motor drives a propeller inside the tank

  What is the maximum possible temperature of the high

a refrigerator cycle has a cop of 3 and removes 100kw of heat from a building which is kept at 23c. the device rejects

  What magnitude f is required for the decelerating force

A luge and its rider, with a total mass of 98 kg, emerge from a downhill track onto a horizontal straight track with an initial speed of 39 m/s.

  What was the mass of freon-12 added to the tank what is the

an 0.5 m3 rigid tank contains equal volumes of freon-12 vapor and freon-12 liquid at 312k. additional freon-12 is added

  A 50 kg copper block initially at 350 degree c is quenched

a 50 kg copper block initially at 350 degree c is quenched in a closed rigid insulated tank containing 120 l of liquid

  Bob is asked to design a system for heating process water

bob is asked to design a system for heating process water in a chemical plant. the system is to heat 500 gallons of

  A rigid insulating tank that is initially evacuated is

a rigid insulating tank that is initially evacuated is connected through a valve to a supply line that carriers helium

  A partitioned chamber that is well insulated has frac12

a partitioned chamber that is well insulated has frac12 filled with h2o at 500 deg f and 50 psia and the other frac12 a

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd