Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
A DC machine (6 kW, 120V, 1200 RPM) has the following magnetization characteristics at 1200 RPM.
If (A) 0 0.1 0.2 0.3 0.4 0.5 0.6 0.8 1 1.2Ea (V) 5 20 40 60 79 93 102 114 120 125
The machine parameters are Ra = .2 ohms
The DC machine rotates at 1500 RPM and it delivers rated current at rated terminal voltage. The field winding is connected to a 120 V supply. Find the value of the field current and the value of R (field control resistance) required.
1. Determine the peak-to-peak current ripple in the output inductor for a forward converter and determine the output voltage ripple of the converter. We know the following parameters: duty cycle d, input voltage Vin, turn ratio.
A window is etched through a 500 nm thick oxide on a [100] silicon wafer. The wafer is re-oxidized at 1100 °C using wet oxidation to grow a 750 nm thick film inside the window. Draw a cross-section of the wafer following the second oxidation.
1-for an FM reciever tuned to 94.5 MHZ using high side-injection and a first IF of 10.7 MHZ, Determine the image frequency and the local oscillator
Develop an I/O port decoder, using a PLD, that generates 16-bit I/O strobes for the following 16-bit I/O addresses: 1000H-1001H, 1002H-103H, 1004H-1005H, 1006H-1007H, 1008H-1009H, 100AH-100BH, 100CH-100DH, and 100EH-100FH.
Assume a house with 100 m2 of roof area. All the water runoff from the roof is collected into barrels of 55 gal capacity. The stored water is used to irrigate flower beds at the rate of 10 gal/day.
An office building is billed based on the rate structure given in Table 5.3 (Energy charges is $0.0732/KWh and demand charge is $9 / mo-kw. As a money saving strategy, during the 21 days per month that the office is occupied
The amplifier is connected to the handset antenna which has an impedance of 35 + j10 at one unspecified operating frequency. Find the inductive reactance and capacitive reactance needed to match the transmitter output to the antenna
A long hallway has three doors, one at each end and one in the middle. A switch is located at each door to operate the incandescent lights along the hallway. Label the switches A, B, and C. Design a logic network to control the lights.
Bob enters a pizza shop and notices there are three different sizes of pizzas available. Sizes are given as the diameter of the pizza in inches. The cost of a pizza is based on the size. Bob would like to know which size of pizza has the lowest co..
A 345-kV, 3-phase transmission line delivers 100 MVA, 0.866 lagging, to a wye connected load. Calculate the following: a. The total real and reactive power delivered to the load. b. The real and reactive power per phase.
It the resistors used are not ideal but have a ±5% manufacturing tolerance, what are the extreme output voltage and resistances that can result?
Let y1(t)=y2(t)=t-1 over 0
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd