User Account

All Pages

Find the turbine efficiency using the air tables

Assignment Help Mechanical Engineering
Reference no: EM13702366

Air enters a non-ideal gas turbine at T1 = 2290°F, P1 = 196 psia and exits at T2 = 1200°F, P2 = 14 psia. (a) Assuming constant specific heats evaluated at 1000F, find the turbine efficiency using the Air Tables.

Reference no: EM13702366

Questions Cloud

Find the necessary diameter for the pipe : We need to design a piping system that transports 35ft^3/s of water 100ft. The available head is 7ft. The pipe is to be made out of a rough concrete material. Find the necessary diameter for the pipe.
Determine the temperature and pressure at the nozzle inlet : Helium gas enters a nozzle, whose isentropic efficiency is 95 percent with a low velocity, and it exits at 14.4 psia, 160 degrees F, and 940 ft/s. determine the temperature and pressure at the nozzle inlet.
Calculate minimum wall thickness assuming factor of safety : A 7in diameter cylindrical scuba tank made from steel is being designed for an internal pressure of 1600 psi. The allowable stress of the steel is 35 ksi in tension and 16 ksi in shear. Calculate the minimum wall thickness assuming a factor of safety..
What is thermal efficiency of honda civic for city : Honda Civic 2012 model has an EPA rating of 28 mpg city and 39 mpg highway. What is the thermal efficiency of Honda Civic for city and highway respectively?
Find the turbine efficiency using the air tables : Air enters a non-ideal gas turbine at T1 = 2290°F, P1 = 196 psia and exits at T2 = 1200°F, P2 = 14 psia. (a) Assuming constant specific heats evaluated at 1000F, find the turbine efficiency using the Air Tables.
Find cycle thermal efficiency and mass flow rate of air : The power output of an ideal, open-cycle gas turbine cycle is 75 MW and its pressure ratio is 16. Air enters the compressor at 520 R and enters the turbine at 2800 R. Using variable specific heats at 1000°F: cp = 0.263 Btu/lbm-R and k = cp/cv = 1.353..
Measured from the canoe and not an absolute value : A 150 pound person is standing in a stationary 200 pound canoe. If the person dives into the water such that his intial velocity is 5 feet/ second at an angle of 30 degrees from the horizontal, determine the velocity of the canoe immediately after th..
Design a piping system that transports : We need to design a piping system that transports 35ft^3/s of water 100ft. The available head is 7ft. The pipe is to be made out of a rough concrete material. Find the necessary diameter for the pipe.
The power output of a non-ideal gas turbine cycle : The power output of a non-ideal gas turbine cycle having a compressor thermal efficiency of 80% and a turbine thermal efficiency of 90 %., open-cycle gas turbine cycle is 75 MW and its pressure ratio is 16. Air enters the compressor at 520 R and ente..

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  The pistoncylinder contains 01 kg r-410a at 600 kpa 60oc it

the pistoncylinder contains 0.1 kg r-410a at 600 kpa 60oc. it is now cooled so the volume is reduced to half of the

  Determine for the cycle the rate of heat transfer to the

water is the working fluid in an ideal regenerative rankine cycle. superheated vapor enters the turbine at 10 mpa 5000c

  The corresponding mass flow rates not the original

incoming air flow of 200 m3h at a temperature of 20oc and a humidity ratio of 0.012 kgvkga is mixed in a chamber with

  If the pressure and volume in the first state are p1 10

a polytropic process is one in which the pressure p and volume v are related by the formula npvcwhere c is a constant.

  Determine the smallest allowable dimensions a and b of the

two blocks of rubber with a modulus of rigidity g 5 12 mpa are bonded to rigid supports and to a plate ab. knowing that

  What is the magnitude of the net force

A 1300 car is traveling along a straight road at 18 . Two seconds later its speed is 21. What is the magnitude of the net force acting on the car during this time?

  The eccentricity is 01 the inclination is 30 degree and the

a spacecraft is in a circular equatorial orbit 1 of radius r0 and speed v0 about an unknown planet mu not equal to

  Show how did you do the maintenance during your workshop

show how did you do the maintenance during your workshop machines were sent to your workshop from a big

  Determine the maximum shear stress

Draw the Mohr's circle for this stress state, deterrnine the principal stresses and the angle of the principal direction to the x-axis and determine the maximum shear stress.

  Heat is now added to the container and the temperature

a rigid container of volume v 01 m3 contains 1 kg of water. initially the system is at a temperature of t1 30c.a what

  A piston-cylinder assembly with initial volume of 80 liters

a piston-cylinder assembly with initial volume of 80 liters contains 4 kg of r-134a at a pressure of 160 kpa state 1.

  Calculate compression ratio cr pressure and temperature at

a six cylinder diesel engine with a 4.5 inch. bore for each cylinder and 5.0 inches stroke works on a theoretical

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd