Find the total complex power delivered to the load

Assignment Help Electrical Engineering
Reference no: EM13270434

Fundamentals of Electric Circuits fourth edition: alexander, sadiku chapter 12 problem 12.29 A balanced three phase wye-delta system has Van= 120 angle 0 Vrms and Zdelta= 51+ j45 ohms. if the line impedance per phase is 0.4 + j1.2 ohms, find the total complex power delivered to the load.

Reference no: EM13270434

Questions Cloud

Find the length of the beam at the initial temperature : The length of a beam increases by 1.26mm when its temperature is raised from 29.87oC to 71.49 oC. What is the length of the beam at the initial temperature
How fast was the drunk going just before the collision : A drunk driver in a 1700 kg car plows into a 1300 kg parked car with its brake set. how fast was the drunk going just before the collision
Design an embedded system to turn on an led : Design an embedded system to turn on an LED when it is dark and turn off of LED during the day time.
What is the profitability index for the project : If the initial outlay for such a production is $1,500,000 and the appropriate discount rate is 6 percent for the cash flows, then what is the profitability index for the project?
Find the total complex power delivered to the load : Fundamentals of Electric Circuits fourth edition: alexander, sadiku chapter 12 problem 12.29 A balanced three phase wye-delta system has Van= 120 angle 0 Vrms and Zdelta= 51+ j45 ohms. if the line impedance per phase is 0.4 + j1.2 ohms,
Compute the original speed of the bullet : A 690 g wood block is at rest on a frictionless table, when a 27 g bullet is fired into it. what was the original speed of the bullet
Find the firm dividend payout ratio and retention ratio : Drekker, Inc., has revenues of $312,766, costs of $220,222, interest payment of $31,477, and a tax rate of 34 percent. It paid dividends of $34,125 to shareholders. Find the firm's dividend payout ratio and retention ratio.
What is the phase speed of this wave : A sinusoidal traveling water wave has a wavelength of 25 cm and a frequency of 0.60 Hz. What is the phase speed of this wave
What is the tax effect of the sale of the existing asset : The new machine will be depreciated under MACRS using a five-year recovery period. The firm has a 12 percent cost of capital and a 40 percent tax on ordinary income and capital gains.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Calculate the force in pounds on the steel rod

The voltage output from a two active gage of Wheatstone bridge was 3.5 mV. The excitation voltage was 5 V. Nominal resistance of the strain gage was 350 ohms and the gage factor was 2.05. Calculate the force in pounds on the steel rod.

  Implement the function using a 4-input multiplexer

Given the following function: F(W,X,Y,Z) = fm(2,3,5,7,12,13). a. Implement the function using an 8-input multiplexer. b. Implement the function using a 4-input multiplexer.

  Find the focal length in water

The lens-makers' equation applies to a lens immersed in a liquid if n in the equation is replaced by n2/n1. Here n2 refers to the index of refraction of the lens material and n1 is that of the medium surrounding the lens.

  Obtain a minimal hazard free sop expression for f

1. Obtain a minimal hazard free SOP expression for f(A,B,C,D)=fm(0,1,5,6,8,11,13,14,15),d(2,3,10). 2.Implement f(A,B,C,D)=åm(0,4,5,7,10,13,14,15),d(1,2,9) using a minimal number of 1-of-2 MUXs and NOT gates (if needed).

  Calculate the magnitude and phase angle of the current

Calculate the magnitude and phase angle of the current through the coil, and the magnitude and phase angle of the voltage across the coil. Also, calculate S, P and Q for the circuit

  Find no-load voltage of the generator and terminal voltage

A four-pole, 450-kW, 4.6-kV SHUNT GENERATOR HAS ARMATURE AND FIELD RESISTANCES OF 2 AND 333 Ohms. The generator is operating at the rated speed of 3,600 r/min.

  Design an op amp circuit that will create an output voltage

y''(t) = %u2013 25 y, subject to the two initial conditions y(0) = 0.2 and dy(0)/dt = 0. You will need to use integrating op amps for this design. b)What function will the output voltage y(t) be

  Write a program to genrate a square wave

assuming XTAL=11.0592 MHz,write a program to genrate a square wave of 20 Hz frequency on pin2.3?

  What is the fundamental benefit of plc controls

1.Calculate motor speed in revolutions per minute for an eight-pole,50Hz motor. Give the equation and identify its parts; show your math. 2.You need to detect finished products coming down an assembly line.

  Write an instruction sequence to subtract the 4-byte number

Write an instruction sequence to subtract the 4-byte number stored in memory locations 0x10-0x13 from the 4-byte number stored in memory locations 0x00-0x03 and store the difference in memory locations 0x20-0x2

  Implementation of the project:

Implementation of the project with the analog and digital modulation techniques

  Find the correlation coefficient of x and y

Let X be a zero-mean random variable having a variance of 9 and let Y be another zero-mean random variable. The sum of X and Y has a variance of 29 and the difference of X and Y has a variance of 21.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd