Find the rms current in the circuit

Assignment Help Physics
Reference no: EM13688194

Question: A 70.0Hz generator with an rms voltage of 115V is connected in series to a 3.25 kΩ resistor and a 3.50 µF capacitor.

Part I: Find the rms current in the circuit.

Part II: Find the phase angle between the current and the voltage.

If possible just a brief explanation how you got the answer?

Reference no: EM13688194

Questions Cloud

Determine image distance of the truck : The side mirrors on cars are convex mirrors. If the side mirror on the driver side of your car has a focal length with a magnitude of 5.90 m, Determine image distance of the truck
Determine how far from the lens you should locate the screen : You have a converging (convex) lens and a diverging (concave) lens and the magnitude of the focal length of each lens is 38.2 cm. Determine how far from the lens you should locate the screen
For what range of frequencies will the rms current : A 0.37 µH inductor is connected to an ac generator with an rms voltage of 17V. For what range of frequencies will the rms current in the circuit be less than 1.0mA
The difference between unipolar and bipolar disorders : The difference between unipolar and bipolar disorders
Find the rms current in the circuit : A 70.0Hz generator with an rms voltage of 115V is connected in series to a 3.25 kΩ resistor and a 3.50 µF capacitor. Find the rms current in the circuit
The kubler ross theory on death and dying : What are the stages of the Kubler Ross theory on death and dying
Estimate the fraction of this energy that falls on earth : The Sun emits energy at the rate of about 3.9 x 1026 W, estimate the fraction of this energy that falls on Earth
What do you predict the results of such a study might be : What do you predict the results of such a study might be?
Discuss the benefits and drawbacks of television : Discuss the benefits and drawbacks of television

Reviews

Write a Review

Physics Questions & Answers

  Determine the volume of the tank in liters

A steel tank contains 314 g of ammonia gs (NH3 with molar mass 17.0 g/mol) at a pressure of 1.55 x 106 and a temperature of 51.4oC. What is the volume of the tank in liters

  How far from her will the support be

a 30kg child wants to use a 20kg board that is 6.0m long as a seesaw. since all her friends are busy, How far from her will the support be

  What is the macroscopic total cross-section

target 1 cm2 in area and 0. 1 cm thick. There are 0.048 x 1 024 atoms per cm3 in the target, and the total cross-section at the energy of the beam is 4.5 b. What is the macroscopic total cross-section

  An electron is accelerated through a potential difference

An electron is accelerated through a potential difference of 3 eV and is incident on a finite potential barrier of height 5 eV and thickness 5 x 10 * m. What is the probability that the electron will tunnel through the barrier? Show all steps.

  Which is at the center of the rectangle

The drawing shows six point charges arranged in a rectangle. Thevalue of q is 1.63 μC, and the distance d is3.04 m. Find the total electric potential at location P,which is at the center of the rectangle.

  Q1 a bumper car with mass m1 108 kg is moving to the right

q1. a bumper car with mass m1 108 kg is moving to the right with a velocity of v1 4.6 ms. a second bumper car with

  Determine the magnitude of the oscillations

An ideal spring with a spring constant of 25.0 N/m is suspended vertically. A 1.00 kg object is attached to the unstretched spring and released. It then performs oscillations in the form of simple harmonic motions. Determine the magnitude of the o..

  The water in a pipe at a gauge pressure

The water in a pipe at a gauge pressure of 4.2 X105 N/m2 enters a building at ground level at a speed of 0.5 m/s during a round pipe 6 cm in diameter. The pipe tapers down to 3.1 cm in diameter by the top floor, 38 m above the ground level.

  When a potential difference of 156 v is applied to the

when a potential difference of 156 v is applied to the plates of a parallel-plate capacitor the plates carry a surface

  Horizontal frictionless tabletop is pushed against a spring

A block of mass m on a horizontal frictionless tabletop is pushed against a horizontal spring, compressing it a distance x,and the block is then released. The spring propels the block along the tabletop, giving a speed v.

  How far does the bug get from the center before slipping

A bug crawls outward from the center of a compact disc spinning at 190 revolutions per minute. How far does the bug get from the center before slipping

  Determine the mass of the wooden block

A 15.0g bullet with a speed of v=235m/s is fired into a block of wood that is initially at rest on a frictionless surface. Determine the mass of the wooden block

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd