Find the ratio of magnetic force of the wave on the charges

Assignment Help Electrical Engineering
Reference no: EM13287637

A radio wave that may be considered a uniform plane wave propagates through the ionosphere and interacts with some charged particles which are moving with a velocity a tenth the velocity of light in the direction normal to the magnetic field of the wave. Find the ratio of magnetic force of the wave on the charges to the electric force.

Reference no: EM13287637

Questions Cloud

Determine what value of current does each bulb draw : When attached to adirect current supply of 120V. What value of current does each bulb draw What is the total current drawn by the bulbs If one bulb burns out, does the current through eachremaining bulb increase, decrease or remain the same
What should the offer price be : J&J Foods wants to issue some 7 percent preferred stock that has a stated liquidating value of $100 a share. The company has determined that stocks with similar characteristics provide a 12.8 percent rate of return.
Find the magnitude of the normal force on the crate : A crate of weight W is being pushed across a horizontal surface by a force directed at an angle of 20 degrees below the horizontal. find the magnitude of the normal force on the crate
State the percentage of vinegar in the foods : Given that vinegar is 5% acetic acid by weight, estimate the percentage of vinegar in the foods. Assume that vinegar is 1.05 g/ml.
Find the ratio of magnetic force of the wave on the charges : A radio wave that may be considered a uniform plane wave propagates through the ionosphere and interacts with some charged particles which are moving with a velocity a tenth the velocity of light in the direction normal to the magnetic field of t..
Explain what pressure should you fill the acetylene tank : what pressure should you fill the acetylene tank to ensure that you run out of each gas at the same time. Assume ideal behavior for all gases
What is the amount of interest expense for the corporation : Its depreciation and amortization expense was equal to $1,500,000. The company's tax rate is 36 percent. What is the amount of interest expense for the Corporation?
Determine the type of process is the overall process : A system undergoes a 2-step process. In the first step, the internal energy of the system increases by 228J when 166J of work is done on the system. What type of process is the overall process
Explain what is the empirical formula of this compound : When a 2.047-g sample that contains only carbon, hydrogen, and oxygen burns in excess O2, the products are 3.80 g CO2 and 1.04g H20. What is the empirical formula of this compound

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Determine what value of current to limit the led

An LED with a rated range of Vf = 1.4 V to 1.8 V at If = 20 mA is connected to a driver circuit with a peak output of 14 V. What value of current. limiting resistor would be needed to limit the LED current to a maximum value of 20 mA.

  Find the impulse response in n domain

The transfer function (TF) of a system is given below. Find its impulse response inn domain. Hint: First multiply the TF by the z-transform of input-or x(z)-or the z-transform of unit impulse. Factor the denominator and then expand.

  Calculate the output noise power and noise voltage

A three-stage amplifier is shown. The operating bandwidth is 500 KHz at a temperature od 25 degrees C. The output load is 1000 ohms. calculate the total NF as a number, calculate the output noise power, and calculate the output noise voltage.

  Determine the incident and transmitted angles

Light is incident from air to glass at Brewster's angle. Determine the incident and transmitted angles. Glass has refractive index n2=1.45.

  Determine whether the system described by is causal

Determine whether the system described by (1) y[n]=log(nx[n]), (2) y[n]=sqrt(n)*x[n+1], (3) y[n]=x[n-2]u[n], where a is an integer and |a|>1, is (i) memoryless; (ii) invertible; (iii) causal; (iv) stable; (v) time invariant; (vi) linear

  Why are overmodulated and carrier suppressed am signals

Why are overmodulated and carrier suppressed AM signals a problem from the standpoint of the receiver. Why (in what siuations) might DSB-SC be prefered over standard AM.

  What is the coefficient of volume expansion of the liquid

The can's initial volume at 5 °C is 7.2 × 10-4 m3. The coefficient of volume expansion for aluminum is 69 × 10-6 (C°)-1. When the can and the liquid are heated to 87 °C, 7.0 × 10-6 m3 of liquid spills over.

  Why the noise level is much lower than the signal

A signal is sampled every 1ms for 20ms, with the following actual values of the analogue voltage at successive sampling times. Plot the values of the voltage recorder by a 5 volt, 4 bit ADC assuming that the noise level is much lower

  Define complex voltage

Complex Voltage = 10-j20. try to convert it to polar coordinate with my Ti 89 but I keep getting my answers in arc tan.

  Determine and represent the signal

Fourier transform X(w)=Xreal(w)+j(Xi(w)). Determine and represent the signal y(w) that gives the fourier transform of Y(w)=Xi(w)+Xreal(w)e^exp(j2w).

  Find the relative values of na and nd in two si samples

Two Si samples are doped n-type and p-type such that they have the same resistance. If the electron and hole mobilities are respectively 1350 and 450 cm2/Vs, find the relative values of Na and Nd.

  What is the doping concentration in quasi neutral n and p

An ideal non-degenerate silicon step junction diode with an intrinsic level Ei exactly at mid band-gap is fabricated. Answer all questions related to this diode. a) If Vbi = 0.65V and NA=4ND, what is the doping concentration in the quasi neutral n ..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd