User Account

All Pages

Find the principal stresses in the sleeve

Assignment Help Mechanical Engineering
Reference no: EM13886938

A bronze sleeve, 0.040 in. thick, was mounted on a 2.000-in. diameter steel shaft by heating it to 100?C, while the temperature of the shaft was maintained at 20?C Under these conditions, the sleeve just ?t on the shaft with zero clearance. Find the principal stresses in the sleeve after it cools to 20?C. Assume that friction between the shaft and the sleeve prevents any sliding at the interface during cooling, and assume that the shaft is so massive and stiff that strains in the shaft itself are negligible. For the bronze, E = 16 × 106 psi, υ = 0.30, and α = 18.4 × 10-6 (?C)-1.

Reference no: EM13886938

Questions Cloud

Matrix of elastic constants : Do this by assuming uniaxial tension along [110] and expressing σ 1, σ 2,.. .,τ 12 in terms of σ [110]. Then use the matrix of elastic constants to ?nd e1, e2, . . .,γ 12, and ?nally resolve these strains onto the [110] axis to ?nd e[110].
What is smallest angle it can have for the pass to be legal : A rugby player runs with the ball directly toward his opponent's goal, along the positive direction of thex-axis. He can legally pass the ball to a teammate as long as the ball's velocity relative to the field does not have a positive x component.
Poorer service compared to the original system : Does this system provide better or poorer service compared to the original system? Discuss any differences and the reason for these differences.
How are audit risk and detection risk affected : What is the directional relationship between the risks of material misstatement (inherent and control risk) and both audit risk and detection risk? How are audit risk and detection risk affected?
Find the principal stresses in the sleeve : Find the principal stresses in the sleeve after it cools to 20?C. Assume that friction between the shaft and the sleeve prevents any sliding at the interface during cooling, and assume that the shaft is so massive and stiff that strains in the sha..
What seems to be working well in the culture : What seems to be working well in the culture and in the church in addressing some of these concerns? What ideas do you have to improve what is being offered, specifically through communities of faith? What are the barriers to such suggestions
Economic theory to business management : Managerial economics is the discipline which deals with application of "economic theory to business management" Discuss
Multiple regression model with three independent variables : Consider the multiple regression model with three independent variables, under the classical linear model assumptions MLR.1 through MLR.6: Let ˆ1 and ˆ2 denote the OLS estimators of 1 and 2. Find Var(ˆ1 3ˆ2) in terms of the variances of ˆ1 and ˆ2 and..
Calculate the principal strains : Strain gauges mounted on a free surface of a piece of steel (E = 205 GPa, υ = 0.29) indicate strains of εx = -0.00042, εy = 0.00071, and γ xy = 0.00037. A. Calculate the principal strains.

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  With what type of parametric property modifications and

with what type of parametric property modifications and redefinitions made in one module such as a part mode are

  A computer cpu chip operates at steady state with d-c

a computer cpu chip operates at steady state with d-c electrical input of 4.5 amps at 9 volts. to prevent the chip from

  What weight lbsgal drilling mud would be required to

1. if the average density of the sediments in the gulf of mexico is 2.17 gmcc and the water depth at the wellsite is

  Write two second order differential equations

Write two second order differential equations which describe the forces on each mass. Do this in the comments of your code. (Hint: Newton's Law F=ma, Hooke's law F=-kx.,F=Force, m=mass, a=acceleration, k=spring constant, x=displacement from equili..

  Iron has a bcc crystal structure an atomic radius of 0124

a iron has a bcc crystal structure an atomic radius of 0.124 nm and an atomic weight of 55.85 gmol. compute and compare

  Explain what is the output of the fuel cell stack

The reference voltage for a fuel cell at 80°C is Ev= 1.18 V. Assume any losses to be negligible and that the voltage at which it operates is the open circuit voltage; in reality, the voltage would be lower due to the current flow. What is the outp..

  Decides to make a wing component from an aluminium alloy

Boeing decides to make a wing component from an aluminium alloy. This material is known to have a plane strain fracture toughness of 45 MPa m^(1/2). During component analysis, it was determined that the processing technique produced materials exhibit..

  What is the entropy generation in the process

A thermodynamicist is attempting to model the process of balloon inflation by assuming that the elastic casing behaves like a spring opposing the expansion as presented in the figure. As air is admitted, the spring is compressed.

  Determine number of atoms contained within each of plane

Assuming that within metal crystals, the atoms can be considered as hard spheres in contact, sketch arrangement of atoms in a (100) plane, a (110) plane and a (111) plane of face-centered cubic structure. Determine the number of atoms contained wi..

  If the head loss in 30 m 100 ft of 75 mm 3 in pipe is 76 m

if the head loss in 30 m 100 ft of 75 mm 3 in. pipe is 7.6 m 25 ft when a certain quantity of water flows therein what

  Draw and label a flow chart of the process giving the

a double effect evaporator is used in feed forward mode to produce fresh water from sea water vontaining 3.5wt

  What force must be applied to the plunger

the pressure in the vein is known as 1850 Pa. what force must be applied to the plunger, so that 1.5 x 10^-6 m^3 of solution can be injected in 5.0 s?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd