Find the pauls speed after being pulled

Assignment Help Physics
Reference no: EM13342355

Susan's 12.0kg baby brother Paul sits on a mat. Susan pulls the mat across the floor using a rope that is angled 30? above the floor. The tension is a constant 32.0N and the coefficient of friction is 0.210.

Use work and energy to find Paul's speed after being pulled 3.20m?

Reference no: EM13342355

Questions Cloud

Determine the angle through which the blade has turned : A circular saw blade of diameter 0.175m starts from rest. In a time interval of 5.60s it accelerates with constant angular acceleration to an angular velocity of 140rad/s
Determine how much ice will remain : A mass of 150 g of hot coffee at 90.0 oC is poured into an insulated cup containing 220 g of ice initially at 0.0 oC. how much ice will remain
Find how many watts are needed to boil water at this rate : The bottom of an aluminum pot has an area of 157 cm2 and a thickness of 3.25 mm. How many watts are needed to boil water at this rate
Determine maximum height will the rock reach : A rock is thrown straight upward.it leaves the throwers hand at a height 1.5m above the surface of the earht with a speed 1.5m/s. what maximum height will the rock reach
Find the pauls speed after being pulled : Susan's 12.0kg baby brother Paul sits on a mat. Susan pulls the mat across the floor using a rope that is angled 30? above the floor. Use work and energy to find Paul's speed after being pulled 3.20m
Explain why the thin shell has a greater amount of intertia : Consider a solid sphere and a thin shell with the same radius and the same mass. Explain why the thin shell has a greater amount of intertia
Explain what type of energy both objects have : Suppose you have two equal mass objects both on a gentle incline. One is a glider on an air track while the other is a ball on a straight slope. Explain what type of energy both objects have
Find the maximum usable magnification : Find the maximum usable magnification for the 200 inch Hale telescope of the Mt. Palomar observatory
Determine the bullets speed just before impact : A uniform thin rod of length 0.50 m and mass 4.0 kg can rotate in a horizontal plane about a vertical axis through its centre. what is the bullet's speed just before impact

Reviews

Write a Review

Physics Questions & Answers

  What is the melting point of this substance

A platinum resistance thermometer has resistances of 230.0 omegacap.gif when placed in a 0°C ice bath and 236.8 omegacap.gif, What is the melting point of this substance

  What is the total charge on the outer surface

An empty hollow metal shell containing vacuum has a total charge of 3C on its outer surface. What is the total charge on the outer surface once this has happened

  What is the minimum thickness of the coating

A steel cable with total length 20 m and mass 100 kg is connected to two poles. The tension in the cable is 2,000 N, and the wind makes the cable vibrate with a frequency of 2 Hz. compute the wavelength of the resulting wave on the cable.

  What is grocery carts final speed

Why does the base of a shuttle cock always lead in motion when hit with a racket. what is grocery carts final speed.

  Explain when does the shoe reach the ground

A parachutist descending at a speed of 10.0 m/s loses a shoe at an altitude of 30.0 m. (Assume the positive direction is upward.). Explain when does the shoe reach the ground? What is the velocity of the shoe just before it hits the ground?

  Determine the average frictional force that stops the bullet

A 7.80-g bullet moving at 500 m/s penetrates a tree trunk to a depth of 5.40 cm. find the average frictional force that stops the bullet

  Compute the spring stiffness constant of the spring

A 900kg car strikes a huge spring at a speed of 24m/s(Figure 1) , compressing the spring 5.5m. compute the spring stiffness constant of the spring

  Explain by how much upward force does support exert on beam

A 3.0 m long rigid beam with a mass of 120 kg is supported at each end. An 85 kg student stands 2.0 m from support 1. Explain by how much upward force does each support exert on the beam?

  For how long is the sample usable

A 115 mCi radioactive tracer is made in a reactor. When delivered to a hospital 16 hours later its activity is 95 mCi. For how long (in hours) is the sample usable

  What amplitude of simple harmonic motion of the spring

A wheel 90.0 cm in diameter accelerates uniformly from 235 rpm to 385 rpm in 6s. How far will a point on the edge of the wheel have travelled in this time.

  How much energy would be available through fusion

Then the driver sees a red light up ahead at next intersection, and starts slowing down at the constant rate. The car stops at the red light, 180 {rm m} from where it was at t = 0.

  What is the spatial separation of the two events

In one frame of reference(say H), two events occur at the same point in space, but are separated by a time interval of 100 nanoseconds

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd