Find the maximum power and torque

Assignment Help Electrical Engineering
Reference no: EM131201294

A 2,000-hp, unity power factor, three-phase, Y-connected, 2,300-V, 30-pole, 60-Hz syn chronous motor has a synchronous reactance of 1.95 Ω per phase. Neglect all losses. Find the maximum power and torque.

Reference no: EM131201294

Questions Cloud

Barriers to the development of formal water markets : What are some of the barriers to the development of formal water markets that could potentially lead to more efficient allocations of water?
Marginal net benefit functions : Consider a municipality A and an irrigation district B with the following marginal net benefit functions that describe net benefits from water consumption q.
Find the induced voltage and the power angle of the motor : The per-phase impedance of a 600-V, three-phase, Y-connected synchronous motor is 5 + j50 Ω. The motor takes 24 kW at a leading power factor of 0.707. Determine the induced voltage and the power angle of the motor.
Find the line current and the torque developed by the motor : The back emf of the motor is 2,000 V. The synchronous reactance is 10 Ω per phase, with negligible winding resistance. Find the line current and the torque developed by the motor.
Find the maximum power and torque : A 2,000-hp, unity power factor, three-phase, Y-connected, 2,300-V, 30-pole, 60-Hz syn chronous motor has a synchronous reactance of 1.95 Ω per phase. Neglect all losses. Find the maximum power and torque.
Number of foreign-trained physicians permitted : A group of American doctors have called for a limit on the number of foreign-trained physicians permitted to practice in the United States. What effect would such a limit have on the equilibrium quantity and price of doctors' services in the Unite..
Find the generated voltage per phase : If the machine is operating at rated load and voltage at a power factor of 0.867 lagging, find the generated voltage per phase and the torque angle.
Prepare adjusting journal entries on december 31 2007 : Correcting Entries for Patents During the year-end audit of the Cressman Corporation's financial statements for 2007, - Prepare adjusting journal entries on December 31, 2007.
Find the armature current : A 10-hp, 230-V, 60 Hz, three-phase wye-connected synchronous motor delivers full load at a power factor of 0.8 leading. The synchronous reactance is 6 Ω, the rotational loss is 230 W, and the field loss is 50 W.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Formula for the potential of an infinite plate

And the information just given to evaluate the potential difference between the plates in terms of Q, R, and d.

  Design interface between a computer output port and em relay

An alarm is powered by 120 VAC, and the on/off state of the alarm is controlled by an EM relay. Design the interface between a computer output port and the EM relay. The dropout voltage is 3.5 V, and the coil current needs at least 100 mA.

  Find the machine synchronous reactance at 50 hz

A 6 pole round rotor 3 phase star connected synchronous machine has the following test results: Open circuit test: 4000 V line to line at 1000 rev/min, 50 A rotor current Short circuit test: 300 A at 500 rev/min, 50 A rotor current

  Project- feedback control system can u solve the attached

can u solve the attached file????????? ltbrgt ltbrgt ltbrgt ltbrgt ltbrgt ltbrgt ltbrgt ltbrgt ltbrgt ltbrgt ltbrgt

  Calculate e-field generated at points by concentric sphere

Calculate the E-field generated at all points by concentric spheres of surface charge that are centered at the origin. Assume that inner and outer sphers have radii ra and rb and surface charge densities Psa and Psb, respectively.

  Explain what is a darlington transistor configuration

(1) What is a Darlington transistor configuration (2) What are its advantages and disadvantages (3) When is a Darlington configuration used (4) Can Drlington transistors be purchased (5) Do they come in complimentary pairs

  Generalized linear-phase lowpass filter

If we decide to design a highpass filter using this transformation and we wish the resulting highpass filter to be symmetric, which of the four types of generalized linear-phase FIR filters can we use for the design of the lowpass filter? Your ans..

  Write vhdl for d flip-flop with synchronous active-low clear

Write the VHDL PROCESS statements for a D flip-flop with synchronous active-LOW clear, synchronous active-LOW preset, and responsive to a rising edge clock.

  Calculate the efficiency of transmission at the ip level

Calculate the efficiency of transmission at the IP level. Assume no options for the header and no errors. Calculate the efficiency of transmission at the data link layer. Assume no options for IP header and Ethernet-II format are used at the d..

  What are the link length limits due to power and dispersion

A 1 Gb/s optical link is to be operated at the 1.55 m wavelength. Suppose the dispersion at the 1.55 m wavelength is 17 ps/km-nm, and the attenuation is 0.2 dB/km. For achieving a desired error probability, we are given that the receiver requires ..

  Determine the speed and developed torque

A 10 kW, 220 V, dc shunt motor has field and armature reistance of 110 ohms and .20 ohms, respectively. At no-load the motor runs at 1200 rpm and has an armature current of 5 A.

  What is range of resistance that expected to measure

The tolerance on resistors is + 2σ by convention, i.e.,approximately 95% confidence level. With 95% confidence, what is the range of resistance that you would expect to measure experimentally for resistors with the following four color bands

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd