Find the length of the tube

Assignment Help Physics
Reference no: EM13322942

One of the harmonic frequencies of tube A with only one end open is 1080 Hz. The next-highest harmonic frequency is 1320 Hz.

a) Find the length of the tube A

b) What harmonic frequency is next highest after the harmonic frequency 600 Hz?

c) What is the number of this next-highest harmonic?

d) Draw the corresponding wave patterns for the harmonic frequency 600 Hz and the next highest harmonic frequency.

Reference no: EM13322942

Questions Cloud

Find the frequency of the waves reflected back to detector : A stationary detector sends out a sound wave of frequency 0.315 MHz toward an approaching car. What is the frequency of the waves reflected back to the detector
Design a class that holds the following personal data : Design a class that holds the following personal data: name, address, age, and phone num-ber. Write appropriate accessor and mutator methods.
Calculate the water pressure in such a pipe on top floor : Water at a pressure of 3.2 atm at street level flows into an office building at a speed of 0.5 m/s through a pipe 5.6 cm in diameter. Calculate the water pressure in such a pipe on the top floor
Describes the problem being address : Complete a problem analysis that describes the problem being address, and the benefit this system will have for the coaches and administration of the college. When you make a claim in the opening section be sure to follow up or prove it in the bod..
Find the length of the tube : One of the harmonic frequencies of tube A with only one end open is 1080 Hz. The next-highest harmonic frequency is 1320 Hz. Find the length of the tube A
What is the drop in temperature for tea : An 8 g of ice cube at %u2013 120 C is put into a thermos flask containing 100 cm3 of tea at 850C. What is the drop in temperature for tea
Design and implement a class called monetarycoin : Design and implement a class called MonetaryCoin that is derived from the Coin class presented in Chapter 5. Store an integer in the MonetaryCoin that represents its value and add a method that returns its value.
Determine the consolidation settlement of clay by dividing : The coefficient of volume compressibility is 4x10-4 m2/kN at the ground surface and the reduction in the coefficient of volume compressibility with depth equals depth*0.1*10-4 m2/kN.
Create the logic for a program that continuously prompts : The application passes the value in turn to a method that computes the sum of all the whole numbers from 1 up to and including the entered number, and to a method that computes the product of all the whole numbers up to and including the entered n..

Reviews

Write a Review

Physics Questions & Answers

  What is the average power dissipated by the circuit

A series RLC circuit has R = 50 %uF057, L = 2.7 %uF06DH, and C = 52 nF. What is the average power dissipated by the circuit

  Calculkate how far should the mirror be from the wall

A luminous object is 3.60m from a wall. You are to use a concave mirror to project an image of the object on the wall, How far should the mirror be from the wall

  Find maximum speed of the oscillating mass

A mass is attached to the end of a spring and set into oscillation on a horizontal frictionless surface by releasing it from a stretched position of x = +0.150 m. find maximum speed of the oscillating mass

  Find the potential at the geometric center

Four identical point charges (+3.17nC) are placed at the corners of a rectangle, what is the potential at the geometric center of this rectangle

  Calculate the total work done on the cube

A cube of iron, of side length 14cm, is heated from 10?C to 90?C; Calculate the total work done ON the cube and the change in internal energy of the cube

  Find the electric flux through surface

The drawing shows an edge-on view of two planar surfaces that intersect and are mutually perpendicular. Surface 1 has an area of 2.2 m2, while surface 2 has an area of 3.5 m2.

  What is the stress within the girder

A sign (mass 1700kg ) hangs from the end of a vertical steel girder with a cross-sectional area of 0.013m^2, What is the stress within the girder

  What current is required to allow the wire to be suspended

A current-carrying wire of length 0.5m is at the Equator. Assuming that the magnetic field of the Earth has magnitude of 5 x 10^-5 T, what current is required to allow the wire to be suspended

  Compute the velocity of a wave on this bungee cord

A bungee cord is stretched between two poles with a force of 407 N. What is the velocity of a wave on this bungee cord

  Find the electric flux through the top surface of the cube

A 11.0nC point charge is at the center of a 2.50m× 2.50m × 2.50m cube. find the electric flux through the top surface of the cube

  What are the values of the following products

A charge of -4 nC is at the origin and a second charge of 14 nC is at x = 3.00 m. Find out the magnitude and direction of the electric field halfway in between two charges.

  Find the magnitude of the peak value of the induced current

Suppose we are given a square coil that is 5.5 cm on a side containing 100 loops of very fine wire. The total resistance of this coil is 2.0 ? 10?3 ?. Find the magnitude of the peak value of the induced current flowing in this coil under these cond..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd