Find the force exerted by the rope on the bucket

Reference no: EM13277393

A 4.1-kg bucket of water is raised from a well by a rope. If the upward acceleration of the bucket is 2.2 m/s2, find the force exerted by the rope on the bucket.

Reference no: EM13277393

Questions Cloud

Find the maximum acceleration of the truck : A crate of mass m = 33 kg rides on the bed of a truck attached by a cord to the back of the cab, find the maximum acceleration the truck can have before the cord breaks

Find what was the unknown volume : An unknown volume of water at 18.2 degrees Celsius is added to 21.6 mL of water at 35.0 degrees Celsius. If the final temperature is 23.5 degrees Celsius, what was the unknown volume. Assume that non heat is lost to the surroundings; d of water is..

Calculate the ripple amplitude for the frequency : Consider the half wave rectifier with a 100Ω load and a peak voltage of 3.5 V. For a 1000μF capacitor, calculate the ripple amplitude if the frequency is 60 Hz.

Calculate the actual volumetric flow rate of air to furnace : Calculate the actual volumetric flow rate of air to the furnace, the composition of the off gas, and the relative humidity and dew point of the off gas. Assume complete combustion.

Find the force exerted by the rope on the bucket : A 4.1-kg bucket of water is raised from a well by a rope. find the force exerted by the rope on the bucket

Obtain series of curves where v rages in steps : A PN junction has a doping concentration of 10^15, 10^16, or 10^17 cm-3 on the lightly doped n-side and of 10^19 cm-3 on the heavily doped p-side. Obtain series of curves of 1/(C^2) vs. V, where V rages from -4V to 0V in steps of 0.5 V.

Explain what is the final temperature inside the calorimeter : One piece of copper jewelry at 108 degrees Celsius has exactly twice the mass of another piece, which is at 44 degrees Celsius. Both pieces are placed inside a calorimeter whose heat capacity is negligible. What is the final temperature inside the ca..

Determine the potential difference across second capacitor : A 2.50 x 10^-6 F capacitor is charged to 754V and a 6.80 x 10^-6 F capacitor is charged to 563V, Determine the potential difference across the second capacitor

Speech sounds in regard to your purposed design : Write at least a half page about speech sounds (the use of words) in regard to your purposed design. Which speech sounds should be included, their purposes, and justification for their use.

User Account

All Pages