Find the follower force over one revolution

Assignment Help Mechanical Engineering

Reference no: EM131392610

Repeat Problem 15-12 using a cam with a 20-mm symmetric double harmonic rise and fall (180° rise -180° fall). See Chapter 8 for cam formulas.

Problem 15-12

The cam in Figure P15-2 is a pure eccentric with eccentricity= 20 mm and turns at 200 rpm. The mass of the follower is 1 kg. The spring has a rate of 10 Nlm and a preload of 0.2 N. Find the follower force over one revolution. Assume a damping a ratio of 0.1 0. If there is follower jump, respecify the spring rate and preload to eliminate it.

Reference no: EM131392610

Questions Cloud

Describe the public health issues associated : Clean water and sanitation are essential to the functioning of any city. Choose two cities from different historical periods, describe the public health issues associated with water/sanitation in those specific cities, and compare them to similar pro..

Devise a system that will convert the temperature range : Devise a system that will convert this temperature range into an 8-bit digital word with conversion from 00H to 01H at and the change from FEH to FFH occurring at 350°C. An ADC is available with a 2.500-V internal reference.

Develop the complete circuit : A three-terminal solid-state sensor with will be used to provide reference compensation. Develop the complete circuit.

Provide an appropriate digital output to a computer : Devise a signal-conditioning system that will provide an appropriate digital output to a computer. Specify the requirements on the ADC and appropriate analog signal conditioning to interface to your ADC.

Find the follower force over one revolution : Repeat Problem 15-12 using a cam with a 20-mm symmetric double harmonic rise and fall (180° rise -180° fall). See Chapter 8 for cam formulas.

Fully loaned up and they face the same reserve ratio : Suppose all other banks in the system are “fully loaned up” and they face the same reserve ratio. The maximum potential increase in the money supply is._____ . If the Fed were to change the rr to 10% for this bank then.

Find the arm mass and center of gravity location : Cam speed is 200 rpm. Choose a suitable r spring rate and preload to maintain follower contact. Select a spring from Appendix D. Assume a damping ratio of0.15.

Determine how many thermocouples are required : Determine how many thermocouples are required and how they are distributed on the wings. Be sure to consider the internal resistance of the thermocouples.

List all of the eligibility requirements for employment : CPPDSM4080A Work in the Real Estate Industry. List all of the eligibility requirements for employment as a real estate agent representative in your state/territory (please note: requirements should include criteria that make you eligible as well as..

User Account

All Pages