Find the depreciated by macrs method over a 10-year period

Assignment Help Electrical Engineering
Reference no: EM13269883

An asset with a first cost of $50,000 is depreciated by the MACRS method over a 10-year period. If the asset will have a $20,000 salvage value, its book value at the end of year two will be closest to? What formula is used?

Reference no: EM13269883

Questions Cloud

What is the total power the beam dump has to absorb : Fully stripped (all electrons removed) oxygen (16O) ions are accelerated from rest in a particle accelerator using a total potential difference of 10.0 MV. What is the total power the beam dump has to absorb
Frequencies at the phosphoglucose isomerase : Jean Manning, Charles Kerfoot, and Edward Berger studied the frequencies at the phosphoglucose isomerase (GPI) locus in the cladoceran Bosmina longirostris.
Explain will a 16-bit address bus sufficient for system : If a computing system needs two 32Kbytes to store its program and 16Kbytes to store temporary data, will a 16-bit address bus sufficient
What is the index of refraction of the glass : When red light in a vacuum is incident at the Brewster angle on a certain type of glass, the angle of refraction is 39.0°. What is the index of refraction of the glass
Find the depreciated by macrs method over a 10-year period : An asset with a first cost of $50,000 is depreciated by the MACRS method over a 10-year period. If the asset will have a $20,000 salvage value, its book value at the end of year two will be closest to
Basis for relevant claims and defenses-telephone operator : Linda was employed with Southern Telephone Company as a telephone operator for ten (10) years. Bored with this job, she applied for an open position as a telephone repairman which paid $10.00 per hour more than she was currently earning.
Goal of the annotated bibliography : Goal of the annotated bibliography is to help you gather and organize the supporting evidence that you'll use to argue your thesis statement/hypothesis/research question
What is the speed of the sound in steel : Sound with a frequency of 466 Hz travels through steel. What is the speed of the sound in steel?
Building loyalty in business markets : After reading the HBR article "Building loyalty in business markets" (2005), explain how customer loyalty could be built in business markets.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Determine the ohmic value of the synchronous reactance

The Per-cent impedance of a single-phase electric load is 2.5. The base power is 100KVA, and the base voltage is 12.47KV. a find the per-unit impedance of the load if 400KVA and 20 KV are selected as base values.

  Define bipolar junction transistor

Bipolar Junction Transistor, A silicon n-p-n bipolar junction transistor is designed with emitter, base and collector doping levels of 10^19cm, 10^15cm and 5*10^17cm, respectively.

  Can buck converter with synchronous rectifier operate in dcm

Can A Buck Converter with Synchronous rectifier operate in DCM at a light load If the load is disconnected how does this affect the Inductor current

  Hat happens to both resolution and full-scale output of dac

1. What happens to both resolution and full-scale output when the reference voltage on a DAC is increased by 20% a. resolution gets better by 20%, output goes down by 20% b. resolution gets worse by 20%, output goes up by 20%

  Determine the transfer function of the designed fir system

Design a 3-tap FIR lowpass filter with a cutoff frequency of 1,500 Hz and a sampling rate of 8,000 Hz using a. rectangular window function b. Hamming window function.

  What is the value if idand vgs at the location

In n-channel JFET, Ohmic region is separated from Saturation region by VP so called Pich-off voltage or VGS(OFF). What is the value if IDand VGS at this location and how we can calculate the value of VP from ID and VGS

  Design a low pass active filter that passes frequencies

Design a low pass active filter that passes frequencies at 900 Hz and below and at these values the magnitude (in dB) of the transfer function is between 23 dB and 17 dB. The circuit's magnitude (in dB) of the transfer function at a frequency of 1..

  How to compare the results with the ones for analog filter

Compare these results with the ones for analog filter and comment. Notice that the frequency response of digital filter has linear normalized frequency in [0,f] when the bode plot gives a logarithmic frequency axis of different range.

  How much power can you generate with this system

The simple inexpensive hydro turbo-generator (turbine mated with electric generator) that you intend to buy has a working efficiency of 60%. Answer the following (show your work).

  What is the value of the amplifier feed a load resistance

A common source amplifier utilizes a mosfet for which Va= 12.5 V and is operated at Vov= .25V. What is the value of (gmro) The amplifier feed a load resistance RL= 15Kohms. The designer selects RD=2RL. If its required to realizes an overall voltag..

  How will bjts current gain and breakdown voltage be changed

Consider a PNP BJT optimum designed for low voltage high current gain. (a)  Draw energy band diagram with proper labeling with VCB= -0.7V, VEB= 0.7V. Which mode is the BJT operated in (b)  Plot excess minority charges stored in each region with pro..

  Determine and draw the complete power triangle

Given a circuit with applied voltage v(t)=14.14cos(ωt)(V) and a resulting current i(t)=17.1cos(ωt-25)(mA). Determine and draw the complete power triangle.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd