Find the currents and voltages

Assignment Help Electrical Engineering
Reference no: EM131236319

Repeat Problem for VCC = 3.3 V. Assume input conditions of (i) vX = vY = 0.1 V and (ii) vX = vY = 3.3 V.

Problem:-

In Figure, the transistor current gain is β = 20. Find the currents and voltages i1, i3, i4, and v for the input conditions:

(i) vX = vY = 0.10 V, and (ii) vX = vY = 5 V.

280_Fig 9.jpg

Reference no: EM131236319

Questions Cloud

Explain entry strategies performed by company : Explain entry strategies performed by company. Use journal articles to explain concept of company's entry strategy and benefits. Identify constraints of selected strategy. combine journals and info from company to analyse constraints
Find the work and heat transfer per kilogram of fuel mixture : A gas turbine burns methane with 150% theoretical air. Assume the air is 25?C, 100 kPa, and has a relative humidity of 80%. How large a fraction of the product mixture water comes from the moist inlet air?
Explain the type of information recorded on these databases : Lease property - Explain in your own words why a property manager/leasing consultant would maintain a database of prospective tenants and Explain the different legislation which applies to a residential tenancy agreement, commercial tenancy agreemen..
Embodied in the sybille de cummes painting : What renaissance values were embodied in the Pieta painting? What details or elements of the Sybille de Cummes painting make it a renaissance painting? What renaissance values were embodied in the Sybille de Cummes painting?
Find the currents and voltages : In Figure, the transistor current gain is β = 20. - Find the currents and voltages i1, i3, i4, and v for the input conditions:
What is your social class : What is your social class? In ten years, do you think your social class will be higher, lower, or the same as that of your parents? Why?
Find the air-fuel ratio on a mass basis : The gas-turbine cycle in Problem 10.28 has qH = 960 kJ/kg air added by combustion. Assume the fuel is methane gas and qH is from the heating value at T0. Find the air-fuel ratio on a mass basis.
Explain the influence of the persians : How would you describe and explain the influence of the Persians and of the greeks on western asia and egpyt?
Energy source yield democratic claims : 1. Why did an increased demand for coal as an energy source yield democratic claims in some places and colonial domination in others? 2. Using historical examples, describe in detail the methods employed by coal workers (miners, transporters, etc..

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Find per-unit impedance of the transformer on system base

A Y-connected synchronous generator rated 100 MVA, 13.2 kV has a rated impedance of R = 5% and XS = 80% per-unit. It is connected to a j10Ω transmission line through a 13.8/120 kV, 100 MVA, Δ-Y transformer with a rated impedance of R = 2% and..

  Explain how to produce a logig diagram for both designs

A circuit is needed to divide a 10 Hz signal down to 1 Hz. using only a 7493 4 bit counter produce a logig diagram for both designs , hook the clock input to a 10 Hz clock on the logic designer and hook the output clock to an LED.

  Determine what is the angle of the a-phase current

1-If the AB current in a Y-connected load has an angle of -14°, what is the angle of the a-phase current. (0 decimals in degrees) 2-If the current of the a-phase in a Y-connected load has an angle of -73°

  Determine the maximum tensile stress in the beam

The couple M acts in a vertical plane and is applied to a beam oriented as shown.

  What is electric field in the p-region far from the junction

An n+p junction with a long p-region has the following properties: Na=10^16 cm-3, Dp=13 cm2s-1, µn=1,000 cm2V-1s-1, tn=2×10-6 s. If we apply 0.7 V forward bias on the junction at 300 K, what is the electric field in the p-region FAR FROM the junct..

  Eliminate or reduce the ripples caused by ac voltage input

Perform experiments using your circuit design. Using your digital scope, plot (and submit) input voltage and output voltage from your circuit design. Try to vary the filter portion (R, L, C) of your circuit and plot (and submit) output voltages.

  Find the voltage between the points integrating along a line

Given the electric field E=4xux+2yuyV/m find the voltage between the points A(2,0) and B(0,2) integrating along: (a) straight line AB; (b) broken line AOB, where O(0,0).

  Etermine the work of the turbines

An ideal reheat Rankine cycle operates between the pressure limits of 10 kPa and 8 MPa, with reheat occurring at 4 MPa. The temperature of steam at the inlets of both turbines is 500°C, and the enthalpy of steam is 3185 kJ/kg at the exit

  Determine the reactive power delivered to the load

An AC motor with impedance Z = 4.2 + j3.6 Ω is supplied by a 220 V, 60 Hz source. Determine the reactive power delivered to the load.

  Determine the second order partial differential equation

(a) If E=Exax andH=Hyay, begin with Maxwell's equations and determine the second order partial differential equation thatEx must satisfy. (b) Show that Ex=E0 cos (ωt-βz) is a solution of that equation for a particular value of β.

  How many different teams can be organized consisting of men

How many different teams can be organized consisting of two men, two women, and two children? We have the following groups available for team assignments: six men, five women, and four children.

  Running oscilloscope on a pc

In around 1200 to 1400 words document, write down a paper in which you have to write a report on 'Running Oscilloscope on a PC'.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd