Find out what overall effect pd which is given by data bus

Assignment Help Electrical Engineering
Reference no: EM13251517

a) What is the main drawback of reducing the supply voltage of digital electronics?

b) a built-in battery drive system is based on microcontroller STM32F100RB and has supply voltage 3.0 volts.

The system has total capacitance CT = 1.0 muF (10 ^ 6 Farad) and average frequency in use at 10kHz.
The transformation of battery power to power inn the microcontroller and additional components occurs with virtually no losses.

Find out the average power PD emitted in the system during operation and the average current draw IB from the battery.

Find out what battery capacity you must have in the system so that the system could be used in at least 100 hours between charges.

It is Considered reducing the supply voltage by 2.0 V, which is the minimum voltage for the microcontroller.
What is the requirement for battery life now?

c) An 8-bit microprocessor has a data bus which is connected to eight peripheral modules. Each data line has a capacitance therian to ground (GND) is Cd = 6 p(ico??) F(arad). The capacitance of each of the inputs of a peripheral module is Ci = 8 p(ico??) F(arad).
The average switching frequency of the bus is f = 2 MHz and supply tension is Vcc = 3.3 volts.

Find out what the overall effect PD which is given by the data bus and associated peripheral modules.

Reference no: EM13251517

Questions Cloud

Determine which frequency will be the aliased one : 1) Determine the transfer of second-order highpass filter with a cutoff frequency of 900 Hz and passband gain of 1 using a butterworth type. 2) Design a filter for your transfer function using the sallen-Key topology.Find all the values of the circ..
Find the value of the local gravitational constant : You create a plot of a (in m/s2) vs sin ? and the linear fit of your graph gives a slope of 9.7260 ± 0.3100.
Explain the reaction of hydrochloric acid and sodium sulfite : Sulfur dioxide can be produced in the laboratory by the reaction of hydrochloric acid and sodium sulfite. The skeleton equation for this reaction is: Na2SO3 + HCl --> NaCl + SO2 + H2O
Design a static cmos inverter with long channel transistors : Design a static CMOS inverter with long channel transistors and a. switching voltage VM of 0.6 VDD. What is the resulting ratio of WP/WN b. switching voltage VM of 0.45 VDD. What is the resulting ratio of WP/WN
Find out what overall effect pd which is given by data bus : The system has total capacitance CT = 1.0 muF (10 ^ 6 Farad) and average frequency in use at 10kHz. The transformation of battery power to power inn the microcontroller and additional components occurs with virtually no losses.
Find the mass flow rate : A patient recovering from surgery is being given fluid intravenously. The fluid has a density of 1040 kg/m3, and 9.54 10-4 m3 of it flows into the patient every five hours. Find the mass flow rate in kg/s
Explain what starting materials are required : Propose a synthesis of teflon (polytetraflauroethlene). What starting materials are required? What type pf reaction would be used to achieve polymerization
Compute the cell potential at 298 k of the galvanic cell : Calculate the cell potential at 298 K of the galvanic cell below. Assume no current draw and a perfect salt bridge. Pt(s)| Cu2+ (0.05 M), Cu+ (0.50) || Fe2+ (0.01 M), Fe3+ (0.10 M) | Pt(s)
What is probability results indicate a successful market : what is the probability that the results indicate a successful market for the product and the product is actually not successful?

Reviews

Write a Review

 

Electrical Engineering Questions & Answers

  Calculate the mass of the cooling water in a minute

an electrical transformer dissipates heat equivalent of 3000 kW/h. the inlet and outlet temperatures of the cooling water are 55C and 15C respectively. calculate the mass of the cooling water in a minute.

  Computation the percentage second harmonic distortion

Calculate the percentage second harmonic distortion present in the output. Calculate the percentage error in the output voltage compared to its ideal value at the instant of time when t= 1/3200 seconds.

  Need for radical future plans

Need for radical future plans to alleviate the very real problem we are faced with in New Zealand and address this problem, by providing an answer to Transpower

  Explain comunication technology

When a square wave with a fundamental frequency of 2khz and amplitude 5v and comprised of up to five odd harmonic (each successive odd harmonic having half the amplitude of its predecessor) is passed though a standard telephone line of bandwidth o..

  Explain how an electric shock may occur

A process worker received an electric shock when she attempted to turn off a conveyer control. The toggle switch controlled the power to a variable speed drive. An examination found that dust had accumulated on the toggle switch. Moisture on the ..

  What two points associated with the load line

Discuss the steps required in calculating the collector-emitter voltage in a VDB circuit. Why does this circuit have a very stable Q point Discuss whether transistors being used as switching circuits should be biased in the active region.

  Calculate the power required for the field as a percentage

Two dc motors are compared. the first one is a 4hp dc motor which draws a current or 0.7A when the field is connected to a 150V source. the second, a 600 hp motor draws a field current of 5A when the field is connected to a 300V dc source.

  What is wavelength if reflected light produces max intensity

A 360 nm thick film floats on the surface of the water. The indices of refraction of the oil and the water are 1.50 and 1.33, respectively. The surface of the oil is illuminated from above at normal incidence with monochromatic light.

  Determine the power components of the combination

determine the power components of the combination of three individual loads specified as follows: (Load 1)250VA and pf = 0.5lagging; (Load 2) 180 W and pf=0.8 leading; (load 3) 300VA and 100Ar lagging

  What is context based arithmetic coding

what is context based arithmetic coding?and it is calculated .

  Calculate the internal resistance of the battery

Determine experimentally the value of a resistor that when placed across the battery will make a measurable change in measured battery voltage. Keep the voltage decrease from open circuit value to 10% or less.

  Find odes nd obtain solution that satisfy boundary condition

Nanowire with square cross-section: Starting with the time-independent Schrodinger equation: (a) use separation of variables to obtain three ordinary differential equations (ODEs) (b) solve the ODEs and obtain the solution that satisfies the boundary..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd