Express the differential condition with proper boundary

Assignment Help Mechanical Engineering
Reference no: EM13636363

Consider the base of an 800 W household iron with a thickness, L= 0.6cm, base area = 160cm^2, and thermal conductivity, K = 60 W/m K. The inner surface of the base plate is subjected to uniform heat flux generated by the resistance heaters inside. When steady operating conditions exist, the outer surface temp of the plate is 112 deg C. disregard heat loss through upper part of iron.

Express the differential condition with proper boundary conditions for steady state one dimensional heat conduction through plate.

Reference no: EM13636363

Questions Cloud

A fuel gas containing methane and ethane is burned with air : a fuel gas containing methane and ethane is burned with air infurnace producing a stack gas at 300c and 105kpaabsolute.
What would your answer be if the convection heat transfer : it is well known that wind makes cold air feel much colder as a result of the wind-chill effect which is due to the
A 750-w lamp is placed in series with a resistor and a : a 75.0-w lamp is placed in series with a resistor and a 120.0-v source. if the voltage across the lamp is 28 v what is
If we had not drawn te temperature graph to help : please help me answer these questions thank you inadvance1. when a 9.00 g sample of metal is heated to 100.0 c
Express the differential condition with proper boundary : consider the base of an 800 w household iron with a thickness l 0.6cm base area 160cm2 and thermal conductivity k 60
A when you do this what distance will the bungee cord that : a bungee cord is 30.0 rm m long and when stretched a distance x it exerts a restoring force of magnitude kx. your
Commercial this require 2 pages homework as long fill tow : this require 2 pages ltbrgthomework as long fill tow pages it would be fine. and answer very sample. just as homework
What was the dogs velocity relative to the bank from where : a dog wishes to swim across a slow moving stream. the dog can swim at 2.0ms in calm water. the current velocity is
In a test tube containing a precipitate of pboh2 in water : in a test tube containing a precipitate of pboh2 in water will the ions from the salt have a reasonable concentration?

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Determine the natural convection heat transfer coefficient

experiments have been conducted on a steel vertical flat plate 130 mm in width and 160 mm long. the plate is heated

  A horizontal aluminum rod 1 cm in diameter and 10 cm long

a horizontal aluminum rod 1 cm in diameter and 10 cm long has both ends maintained at 363 k. air at 293 k and 1 atm

  An apparatus for measuring thermal conductivity employs an

an apparatus for measuring thermal conductivity employs an electrical heater sand- wiched between two identical samples

  An 05 m3 rigid tank contains equal volumes of freon-12

an 0.5 m3 rigid tank contains equal volumes of freon-12 vapor and freon-12 liquid at 312k. additional freon-12 is added

  The relative acceleration of block d with respect respect

the system shown starts from rest and each component moves with a constant acceleration. if the relative acceleration

  What are the key differences between incompressible

1. what is the second law of thermodynamics?2. what is isentropic flow and what are the two key assumptions required?3.

  A small bucket of water is swinging above a persons head at

a small bucket of water is swinging above a persons head at a constant angular speed of 10rads. the rope is 1 m long

  Determine total mass of water in the piston cylinder device

a freely moving piston cylinder device containing steam at 270 degrees celsius and 1000 kpa is taken outside ona cold

  The valve is next opened and steam from the line at 135 mpa

a tank has a volume of 0.35m3 and initially contains saturated vapor at 333 kpa. the valve is next opened and steam

  Find the tension in each rope

260-pound weight is supported by two ropes, one forming a 40 degree angle with the ceiling and the other a 50 degree. Find the tension in each rope.

  Basically find dhdt and allow a value of h to be plugged

consider a thin walled cylindrical tank having a diameter of 2 ft and a height of 5 ft. the tank is initially filled to

  Determine the rate of heat addition and rejection when this

an otto cycle uses air as the working fluid its state at the beginning of the compression is 14 psia and 60 f its

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd