Explain a terrestrial radio link transmits a cdma signal

Assignment Help Electrical Engineering
Reference no: EM13138698

Why is a spreading code used in a CDMA radio system?

A terrestrial radio link transmits a CDMA signal from a base station using a spreading code with a chip rate of 1.0 Mchips per seconds. The message data rate of the signal is 10 kbps.

a. Why is a spreading code used in a CDMA radio system?

b. What is the coding gain of the correlator in a CDMA receiver when it is synchronized to the 1.0 Mchips/s signal?

c. A receiver of the CDMA signal has a C/(N+I) ratio of -8.0 dB at its input. What is the CNR at the output of the correlator, assuming ideal operation?

d. A second CDMA base station is located 2 km away from the first station and transmits a different spreading code. As a receiver synchronized to the first base station signal moves close to the second base station it loses synchronization with the CDMA signal from the first base station. Why?

Reference no: EM13138698

Questions Cloud

How many ticket packages will george need to sell : How many ticket packages will George need to sell to break even?
Determine the bayes rule and comment on the role : with loss function L(θ,a)= w(θ)(θ-a)^2, where w(θ) is a fixed weighted function. Determine the Bayes rule and comment on the role of w(θ) in this problem.
Explain next generation transmission system : You are required to determine that this next generation transmission system will require a spectral efficiency of 5 bits/sec per Hertz.
What is the rationale for how abc should account : During a company's start-up or expansion a wide variety of costs and expenses are incurred that are directly associated with beginning the specific operation. For instance, ABC Company has expanded into another country and has constructed new faci..
Explain a terrestrial radio link transmits a cdma signal : A terrestrial radio link transmits a CDMA signal from a base station using a spreading code with a chip rate of 1.0 Mchips per seconds. The message data rate of the signal is 10 kbps.
Governmental changes in fund balances : The reconciliation from governmental changes in fund balances to governmental activities changes in net assets would reflect a(an):
True difference confidence if range of all data is six years : One month of the true difference and with 95% confidence if the range of all the data is 6 years? Use the appropriate tables in your book.
Strategy development : What modes of strategy development are evident in Cordia, and which would you expect to be prevalent, given the strategic change described?
What is the symbol rate of the earth station transmissions : What is the symbol rate of the earth station transmissions? What is the bit rate of the earth station transmissions? What is the duration of the burst transmission from each earth station?

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Draw a relay construction diagram

Draw a relay construction diagram and briefly explain the operation of a relay.

  Define asic design

"Divide by 3 clock with 50% duty cycle" is the most commonly asked ASIC design question. This solution gives a simple design in which only 1 counter is required which works only on positive edge of the clock.

  Implementation of the project:

Implementation of the project with the analog and digital modulation techniques

  Basic neutralizer control system

Write a short report that analyses the P&ID - Basic Neutralizer Control System: The neutralizer process may be used to adjust the pH of a feed stream.

  Power transformers and tariffs

Construction of different types of power transformer, significant energy savings

  Future generation telecommunication technology

Write a report on Future Generation Telecommunication Technology.

  Define a block error detecting code has a minimum distance

A block error detecting code has a minimum distance of three. How many errors can this code detect and how many can it correct

  Define a dsss-cdma signal

A DSSS-CDMA signal has a chip sequence that is 10,000 chips in length. The sequence repeats every millisecond. What is the chip rate?

  Calculate in polar form the sequence components

Calculate in polar form the sequence components of unbalanced line­to-neutral voltages and calculate in polar form the phase currents corresponding to the sequence components

  Explain plotting continuous time signal

Plotting Continuous time signal, Consider the following continuous signal: x(t) = 10e^-3t u(t) Using Matlab, plot the continuous-time signal over the range -1=

  Determine the voltage across the electrical model

Determine the Voltage across the electrical model of a cell membrane in a nerve cell

  Explain the critical radius of insulation.

Explain the following terms; (i) critical radius of insulation. (ii) economic lagging thickness.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd