User Account

All Pages

Exiting stream 3 is at 079 mpa and is know to contain a

Assignment Help Mechanical Engineering
Reference no: EM13607870

High pressure steam (steam 1) at a rate of 1000kg/h initially at 3.5 MPa and 350 C is expanded in a turbine to obtain work. Two exit streams leave turbine. Exiting stream 2 is a 1.5 MPa and 255 C and flows at 100kg/h. Exiting stream 3 is at 0.79 MPa and is know to contain a mixture of vapor and liquid. If the turbine is adiabatic and the power outputs 100 kW, determine the temperature and quality of stream 3.

Reference no: EM13607870

Questions Cloud

Based on the sample data construct a 95 confidence interval : suppose a study of 196 randomly sampled privately insured adults with incomes over 200 of the current poverty level is
The belt connecting these pulleys is represented by two : a pulley 250 mm in diameter drives a second pulley 1000 mm in diameter by means of a belt. the moment of inertia of the
On a multiple choice test of 13 questions each question has : on a multiple choice test of 13 questions each question has four 4 possible answers one of which is correct. for
An automobile is found to have a natural frequency of 20 : an automobile is found to have a natural frequency of 20 rads without passengers and 17.32 rads with passengers of mass
Exiting stream 3 is at 079 mpa and is know to contain a : high pressure steam steam 1 at a rate of 1000kgh initially at 3.5 mpa and 350 c is expanded in a turbine to obtain
Anbspthe random variable x is the number of siblings of a : a.nbspthe random variable x is the number of siblings of a student selected at random from professor appiahs
Determine the particles velocity and acceleration vectors : a particle a is pulled horizontally by a scotch-yoke with a constant velocity v along the elliptical slot given by the
Anbspthe random variable x is the number of siblings of a : a.nbspthe random variable x is the number of siblings of a student selected at random from professor appiahs
A piston cylinder device contains 05 kg of water at 10mpa : a piston cylinder device contains 0.5 kg of water at 1.0mpa and 400oc. now it is cooled to 1mpa in sat-v phase.

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Determine the radius of the crank r

Determine the radius of the crank R and the speed n of a slider crank mechanism, used in a shaker table. It is required that the average speed of the table is 5 m/s, and the maximum absolute acceleration is 3000m/s^2. Assume ratio R/L=0.2

  A 20-mm diameter rod made of a ductile material with a

a 20-mm diameter rod made of a ductile material with a yield strength of 350 mpa is subjected to torque of 100 n.m and

  Komodo dragons are the largest lizards known to man

Komodo dragons are the largest lizards known to man. A 250-pound dragon can eat enough food to increase it body weight by 1/2. Which number sentence could be used to find w, the weight of a k0modo dragon after increasing it body weight by 1/2?

  What is the inner tube surface temperature at the outlet

What is the inner tube surface temperature at the outlet, where fully developed conditions may be assumed?

  Assuming that r-134a is an ideal gas what would the

assuming that r-134a is an ideal gas what would the specific volume of r-134a at 40 deg c and 0.06 mpaabsolute? how

  Find the temperature of source and sink

a heat engine working on carnot cycle converts 25% of heat into work when the temperature of the sink is reduced by 353 k the efficiency gets doubled .find the temperature of source and sink.

  The hot gas supply to a propulsion nozzle is at a pressure

the hot gas supply to a propulsion nozzle is at a pressure of 55kpa and temperature of 800k. the ambient pressure is

  At this point the piston is locked with a pin and

air in pistoncylinder at 200 kpa 600k is expanded in a constant-pressurenbspprocess to twice the initial volume state

  Calculate the kg mix- ture from the mixer

calculate the kg mix- ture from the mixer, kg water evaporated, and kg jam produced.

  The chute is deployed is -0003 v2 speed v in feet per

the 230000 lb space shuttle orbiter touches down at about 220 mihr. at 200 mihr its drag parachute deploys. at 35 mihr

  Review the logic used to develop brake systems of the motor

review the logic used to develop brake systems of the motor vehicle historically. make critical analysis of each phase

  A horizontal cantilever of length l supports a load w

a horizontal cantilever of length l supports a load w uniformly distributed along its length. the cantilever is proped

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd