Evaluate the increase in entropy of the fluid

Assignment Help Mechanical Engineering
Reference no: EM131285370

A system contains a fluid at a temperature of 70 °C and 1 bar. It undergoes a reversible process during which the temperature of the system remains constant. Given that the heat transfer to the fluid during the process is 100 kJ, evaluate

a. the increase in entropy.

b. if the system has a mass of 2.31 kg. Evaluate the increase in specific entropy of the system.

c. If a second fluid system, identical to the first one undergoes an irreversible isothermal process from the same initial state to the same final state as above; and the heat transfer to the fluid in this irreversible process is 180 kJ; evaluate the increase in entropy of the fluid.
[0.2915 kJ/K; 0.1262 kJ/kg K; 0.2915 kJ/kg K]

Reference no: EM131285370

Questions Cloud

What are the four basic sap erp business modules : OSOM 3660-001:Why project management is important? Explain how important project management skills/leadership using real life examples that you have experienced or learned from other's example. Be specific and provide interesting details.What ar..
What would be the equilibrium temperature of the system : What would be the equilibrium temperature of the system if the maximum thermal efficiency of the engine is only 50%?
Broadcasting from china late : ABC's Diane Sawyer was broadcasting from China late in 2010. On the Monday night evening news, she interviewed Jack Ma, (who had lived in Seattle) founder of Internet trading behemoth Alibaba.com.
Should firms be concerned about given criticisms : Are the results of segmentation and target marketing harmful or beneficial to society as a whole? Should firms be concerned about these criticisms? Why or why not?
Evaluate the increase in entropy of the fluid : if the system has a mass of 2.31 kg. Evaluate the increase in specific entropy of the system.
Do firms ever have a moral or ethical obligation : Have technological advances made it possible for smaller segments to be profitable? Do firms ever have a moral or ethical obligation to develop products for small, unprofitable segments? When?
What parents may see as delays in the atypical development : Research and compare typical and atypical motor development. What parents and teachers may see as delays in the atypical development of children with disabilities
What would have been the change in entropy of the universal : Explain how the water could have been heated to give no change in the entropy of the universe. [13.11 kJ/kg K; 11.26 kJ/kg K; 1.85 kJ/kg K; 1.070 kJ/kg K; infinite number of reservoirs]
Airlines industry-product analysis : Pick an airline, domestic or international, and discuss what you feel is their competitive advantage. Do they promote only one or more than one? Do not duplicate your classmates answers.

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  The diameter at the point of fracture is 101 1 mm 0398 in

a cylindrical aluminum specimen having an original diameter of 12.8 mm 0.505 in. and gauge length of 50.80 mm 2.000 in.

  What pressure would the air on the left need to be pumped

a partitioned tank contains water and mercury. what is the gauge pressure in the air trapped in the left chamber? what

  Steel is coated with thin layer pf ceramic to help protect

steel is coated with thin layer pf ceramic to help protect against corrosion. what do you expect to happen to the

  Introduction and description of the technical problem

Introduction and description of the technical problem

  The city of houston has a water filtration system that

the city of houston has a water filtration system that consists of a large rigid tank with a single 1.5m diameter inlet

  Residual stresses parallel and perpendicular

For unstrained material, a = 2.8610. Find the values of the residual stresses parallel and perpendicular to the weld. Assume E = 30 × 106 psi, υ = 0.29, and that the stress normal to the plate is zero.

  What is spray atomization

Homogenization of a slowly cooled Cu-Ni alloy having a secondary dendrite arm spacing (SDAS) of 0.025 cm requires 8 hours at 1000°C. Design a process to produce a homogeneous structure in a more rapidly cooled Cu-Ni alloy having a SDAS of 0.005 cm

  The displacement function ux for a tensile specimen of

the displacement function ux for a tensile specimen of uniform cross section and length l fixed at one end and

  The truck is to be towed using two ropes if the resultant

the truck is to be towed using two ropes. if the resultant force is to be 950 directed along the positive axis

  How many defects and defective units would they produce

In the previous problem, if the foundry desired to improve its quality performance to the 5.0 sigma level in all three measures of DPM, how many defects and defective units would they produce in an annual production quantity of 15,000 castings? As..

  A machinist is making engine parts with axle diameter of 07

a machinist is making engine parts with axle diameter of 0.7 inch. a random sample of 15 parts shows mean diameter

  Calculate the overall train value

calculate: a) the overall train value. b) the output rational speed at shaft 5. c) the output torque at shaft 5. Relevant gear data is= NA= 17, NB= 36, NC= 19, ND= 41, worm E = double lead, worm G = triple lead, NH= 37?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd